Include counts of some headers while making full blender build:
- BLI_color.hh 1771 -> 1718
- BLI_math_color.h 1828 -> 1783
- BLI_math_vector.hh 496 -> 405
- BLI_index_mask.hh 1341 -> 1267
- BLI_task.hh 958 -> 903
- BLI_generic_virtual_array.hh 509 -> 435
- IMB_colormanagement.h 437 -> 130
- GPU_texture.h 806 -> 780
- FN_multi_function.hh 331 -> 257
Note: DNA_node_tree_interface_types.h needs color include only
for the currently unused (but soon to be used) socket_color function.
Future step is to figure out how to include
DNA_node_tree_interface_types.h less.
Pull Request: #111113
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
This updates the signature of `RNA_def_property_update_runtime`
which previously just has a `const void *` input. This made it difficult
to know what function signature is expected and also does not result
in compile errors when a wrong function is provided.
There is one case which required a different signature, so now there
is a separat function for that case.
The goal here is to reduce the number of files that need to be edited when
adding a new node. To register a node, one currently has to add a line to
`node_geometry_register.cc` and `node_geometry_register.hh` (for geometry
nodes). Those files can be generated automatically.
There is a new `NOD_REGISTER_NODE` macro that nodes can use to register
themselves. The macro is then discovered by `discover_nodes.py` that generates
code that calls all the registration functions. The script also works when the
register functions are in arbitrary namespaces. This allows simplifying the node
code as well.
In the past I tried a few times to get auto-registration working without resorting to
code generation, but that never ended up working. The general idea for that would
be to use non-trivial initialization for static variables. The issue always ends up
being that the linker just discards those variables, because they are unused and it
doesn't care if there are side effects in the initialization.
Related discussion regarding using Python for code generation:
https://devtalk.blender.org/t/code-generation-with-python/30558
Pull Request: https://projects.blender.org/blender/blender/pulls/110686
The goal is to be able to define a node in as few files as possible. Currently,
RNA definitions for nodes are put in `rna_nodetree.cc`. However, it seems
surprisingly simple to move them from there to the node files. Of course this
means that `makesrna.cc` won't generate these properties and their accessor
functions anymore. Fortunately, C++ lambdas and the preprocessor make it
fairly straight forward to generate those without the `makesrna` preprocessor.
Using the preprocessor here is not great of course, but I'd argue that it feels
less magical than it was before, so it's an improvement.
This patch changes a few files to test the feasibility of this approach. Eventually,
this approach should be used by all nodes. It can't be used for shader nodes for
now, because cycles still relies on the C++ API generated by RNA.
Right now, only properties are defined the node files. The `StructRNA` is still
generated by `makesrna`. It seems feasible to generate it at runtime as well
though with potentially minor RNA API changes. This is related to #75724.
Pull Request: https://projects.blender.org/blender/blender/pulls/110840
Add three new nodes for operations and inputs specific to
node group operators.
- **Selection** Whether elements are selected in the viewport
- **Set Selection** Sets the edit/sculpt selection, on the point,
face, or curve domains
- **3D Cursor** Gives the location and rotation of the 3D cursor,
in the local space of the modified object.
- **Face Set** The face set value from mesh sculpt mode,
and whether the attribute exists.
- **Set Face Set** Set sculpt face set values.
In the add menu and search, the nodes are only visible in the
"Tool" context of the geometry node editor. They also give
errors when executed by a modifier.
Pull Request: https://projects.blender.org/blender/blender/pulls/109517
Previously, simulation nodes would output default values when there is no
current simulation state and nothing should be computed. Now, the data is
just passed through which is usually less confusing.
Pull Request: https://projects.blender.org/blender/blender/pulls/110800
Add support in the UI for the edit mode of curves, mesh, and point
cloud objects. It's possible to control for which mode sand object
types the asset is available with a dropdown in the node header.
To make this per-mode filtering possible, the static asset tree
cache is now unique per context mode.
See #101778
Pull Request: https://projects.blender.org/blender/blender/pulls/109526
Remove the "_for_read" suffix from methods to get geometry and geometry
components. That should be considered the default, so the suffix just
adds unnecessary text. This is consistent with the attribute API and
various implicit sharing data access methods.
Use "from_mesh" instead of "create_with_mesh". This is consistent with
the recently used naming for the `IndexMask` API.
Pull Request: https://projects.blender.org/blender/blender/pulls/110738
"Tool" is a more friendly word with mostly the same meaning within
Blender. Eventually it should be possible to create active tools with
node groups anyway, so the distinction isn't even helpful.
See #101778
A few places already calculated vertex normals with better contextual
information to improve performance. To allow changing the storage of
vertex normals more (mostly for improved caching), change some code
from "get normals, set values, clear dirty flag" to "make vertex
normals data, give to mesh". This makes the API less awkward too,
since previously the "get for write" and "clear dirty" calls always
had to be separated.
Pull Request: https://projects.blender.org/blender/blender/pulls/110754
The aim is to replace the `BKE_mesh_faces_flip` functions with
this newer C++ function using the attribute API. But that is must
be called by RNA, so move this to blenkernel to avoid a circular
dependency between the geometry module and RNA.
The goal is to reuse the same bake items for simulation and normal baking (#110137).
Previously, the bake data was tied to a simulation state which made it harder to reuse.
Now the code for the following things can be reused easily:
- Convert geometry node socket values into bake items and back.
- Serialize and deserialize bake items.
Pull Request: https://projects.blender.org/blender/blender/pulls/110577
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
Utility functions make accessing the next and previous corner of a face
more obvious, and range based for loops make iterating over corners
or vertices in a face simpler too.
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
- "Rename Channels": only one channel can be renamed at a time, use
singular.
- "Copy Markers to Scene": rephrase erroneous operator description.
- "Axis tag names with": grammar.
- "Close or open the selected stroke adding an edge from last to first
point": "segment" is preferred to "edge" elsewhere in the context of
curves or Grease Pencil.
- "Number of subdivisions [points] by edge[s]": replace "by edge" with
"per segment" for the same reason.
- "Compatibility mode for SL, OpenSim...": expand to explain that SL
and OpenSim are respectively Second Life and OpenSimulator.
- "W/m^2" -> "W/m²". This symbol is widely supported and should be
preferred for exponentiation outside of code.
- "Effect on tracks which are tracked less than specified amount of frames",
"Effect on tracks which have a larger reprojection error":
Use "Affect" and "number" instead of "amount".
- "Hull curve" -> "Envelope". This is a calque from German Hüllkurve
meaning envelope.
- "Frquency Cutoff" -> "Frequency Cutoff" (typo)
- "Check if Select Left or Right": rephrase to "Based on Mouse
Position" as it better explains the action of the operator.
- "Make cut event if strip is not selected ..." -> even (typo)
- "Shear selected items along the horizontal screen axis":
Rephrase as this transform operator can act in many different axes.
- Tonemapping compositing node: the two algorithms "R/D Photoreceptor"
and "Rh Simple" only had names, but no description. Add ones
explaining at least the basic principle and where the names come
from.
- In the "Matte dilate/erode side" description for the Keying node's
Dilate/Erode socket, "side" was likely a typo for "size".
Reformulate the description to make it clearer, inspired by similar
ones.
- "Width of the blur edge" -> "Width of the blur for the transition";
"Edge angle" -> "Angle of the transition";
"Wipe direction" -> "Whether to fade in or out":
Better explains the sequencer wipe transition (inspired by the manual).
- OSL shaders now supported on some GPU backends.
- "Add a new repeat input and output nodes " -> "Add new" (typo).
Pull Request: https://projects.blender.org/blender/blender/pulls/110321
This adds support for running a set of nodes repeatedly. The number
of iterations can be controlled dynamically as an input of the repeat
zone. The repeat zone can be added in via the search or from the
Add > Utilities menu.
The main use case is to replace long repetitive node chains with a more
flexible alternative. Technically, repeat zones can also be used for
many other use cases. However, due to their serial nature, performance
is very sub-optimal when they are used to solve problems that could
be processed in parallel. Better solutions for such use cases will
be worked on separately.
Repeat zones are similar to simulation zones. The major difference is
that they have no concept of time and are always evaluated entirely in
the current frame, while in simulations only a single iteration is
evaluated per frame.
Stopping the repetition early using a dynamic condition is not yet
supported. "Break" functionality can be implemented manually using
Switch nodes in the loop for now. It's likely that this functionality
will be built into the repeat zone in the future.
For now, things are kept more simple.
Remaining Todos after this first version:
* Improve socket inspection and viewer node support. Currently, only
the first iteration is taken into account for socket inspection
and the viewer.
* Make loop evaluation more lazy. Currently, the evaluation is eager,
meaning that it evaluates some nodes even though their output may not
be required.
Pull Request: https://projects.blender.org/blender/blender/pulls/109164
