* All tools where rotation order matters for armature bones have now been adjusted to use the new code
* Transform now uses the new code for bones too. However, there are some jumping issues here that I'm not too sure how to solve yet. Help fixing this is welcome.
* Disabled temporary debugging prints, since event handling now seems stable
* Modified the initgrabz() code so that when the cursor is behind the viewplane, the z-factor is calculated as if the cursor was on the other side of the view plane. This seems to work well, and doesn't seem to have any negative side-effects (yet).
* Grease Pencil works again from Image Editor now. For now, the GPencil datablock is linked to the Image Editor space, but this can be changed if need be.
* Made Grease Pencil hotkeys into a separate Grease Pencil keymap, which can get included automagically like for frames/ui/v2d/etc. by supplying ED_KEYMAP_GPENCIL as part of st->keymapflag
* Temporarily restored the nasty hack to make View2D-aligned sketches in Image Editor to use OpenGL lines only. I still dunno why this doesn't work normally.
(Probably related is that strokes are not visible when there's no image visible atm).
- Baked point caches for particles, cloth and softbody can now be edited in particle mode.
* This overwrites the old cloth/sb cache editmode editing.
* The type of editable system is chosen from a menu.
* For particles the current particle system and it's current cache are used.
- Currently this only works for caches that are in memory, but some automatic conversion from disk to memory and back can be implemented later.
- All tools from hair editing can't be applied to point caches and are hidden in the tool panel and specials menu. Some functionality like subdividing paths can be later implemented in a slightly different way from how it works for hair.
- Code is not yet optimized for speed, so editing might be slow sometimes.
Known issues:
- Cloth doesn't update properly while in particle mode, due to the way cloth modifier currently works. Daniel can you check on this?
- As "particle mode" is not only for particles any more some other name would be in place?
- Better icons are needed for the path, point, and tip-modes as the current icons from mesh edit mode are quite misleading.
- Direct editing of point velocities is not yet implemented, but will be in the future.
Other changes:
- Hair editing doesn't require a "make editable" button press any more.
- Multiple caches in single particle system disables changing emission properties.
- Unified ui code for all point cache panels.
* Defined in buttons_particle.py and imported for cloth, smoke & softbody.
- Proper disabling of properties in ui after baking point caches. (Daniel could you please make needed disable code for smoke panels as their functionality is not familiar to me.)
- Hair weight brush has been removed. Once hair dynamics is re-implemented I'll code a more useable alternative to the functionality.
Bug fixes:
- Unlinking particle settings crashed.
- Deleting the active object with particles in the scene crashed.
- Softbody didn't write point caches correctly on save.
Restored the UI for access to the GP layers.
There are still a few minor bugs here:
* Wrong icons on the toggles - even when they're enabled, they only show a single state
* The ID-template doesn't seem to be showing up. Dunno what's going wrong there...
* When starting Grease Pencil from the toolbar, strokes are now started only when a click-drag begins.
* Made the 'straight-lines' option an RNA property for the operator
* Added an exec() callback and relevant stroke-collection stuff so that interactive redo/changing settings can work.
WARNING: this is highly unstable here - keeps crashing though I cannot determine the cause yet.
* Realtime updates now work again
* Fixed problems with clicks to start drawing resulting in a stroke being ended.
* Changed the hotkeys to Ctrl-Alt-Shift-LMB (draw) and Ctrl-Alt-Shift-RMB (erase). Still very temporary stuff, will probably change these a few more times as I experiment with new approaches.
This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks.
However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
*enable non-2^n textrues for all gfx cards which support it.
* try to enhance the visual quality under linux a bit when gfx card doesn't support it (still errors visible)
Patch by Lorenzo Pierfederici (lento). Many thanks!
* Ported some more menus to python (Pose, Particle...)
* Some cleanup and reorganization in the python file to reduce code. :)
* Cleanup of old C buttons code.
Moved WeightPaint/VertexPaint toggling hotkeys to the same place that the ones for PoseMode/EditMode are defined. This means that the hotkey for toggling PoseMode works again (instead of being overwritten by WeightPaint).
* Made object mode an enum, shows better in the debugger
* Added a toggle mode to the set object mode operator
* Toggling a mode on and off goes back to the previous mode, not just object mode
* Changed the vertex mode and weight mode shortcuts to call the toggle mode operator
when passing properties=True as argument.
Other changes:
* uiItemR, uiItemFullR, uiItemFullO now accept a flag argument rather
than multiple different "boolean" arguments, but still exposed as
booleans to python.
* Fix RNA to support setting PROP_RNAPTR for return values.
* Alt-S in Object Mode would crash. Was caused by modal-keymaps for Pose Mode not being cleared when not in Pose Mode.
Also fixed what appears to have been a copy+paste error for Armature Sketching keymaps.
* Active KeyingSet menu in TimeLine header is now properly editable. Was using the wrong type of layout call to do this.
* Popup menus now remember the last clicked item again.
* Modifier and File Format menus are now organized in multiple
columns with categories.
* Hook, explode, uv project modifiers have all their buttons
again with the relevant operators implemented.
* Modifiers that can't be added by the user, or don't work on
curves for example, are not in the menu anymore.
* Fix search menu overlapping buttons when near the bottom of
the screen.
* Fix uv layers search menu not working in some modifiers.
* Cleanup popup menu code a bit, layout engine is used in more
cases now instead of ugly position calculation code.
* cache for low res (deactivating high res for now)
* new way of view3d rendering of smoke (no longer 3 axes) -using 3dtexture now (introduced into gpu/intern)
* introducing LZO and LZMA libs into extern (makefiles missing for now)
* reducing memory usage after simulating for the frame ended (freeing temporary buffers)
* splitting smoke into 2 modifier for the cache-sake (it cannot handle more than 1 cache on the same modifier-index)
* no color on gui anymore
* fixing non-power-of-2 resolutions (hopefully)
* fixing select-deselect of domain drawing bug
* fixing drawobject.c coding style (making Ton happy) ;-)
HINT #1: If scons doesn't work -> cmakefiles are up-to-date, couldn't test scons (but i tried to mantain them, too)
CODERS HINT #1: we really need a way to disable adding all modifiers through "Add Modifiers" dropdown!
WARNING #1: before applying this commit, deactivate your SMOKE DOMAIN in your old files and save them then. You can open them then savely after that.
WARNING #2: File and cache format of smoke can be changed, this is not final!
* Some initial work on a new paint abstraction, PaintStroke. For now, most of the code just pulls out stroke-related stuff from sculpt mode, next step is to integrate the other paint modes to use this. It'll enable stuff like smooth stroke for all the paint modes with less code duplication.
* Fix header menu spacing bug, and make it consistent for all headers.
* For consistency, always put menus first in the header, then any enums
to switch the type of data displayed.
* Node editor header ported to python layout. Still quite a few
operators missing to make the menus complete.
* RNA wrapped node editor, and added use_nodes property to material
and scene.
* Added Shading and Performance panels in the scene buttons,
containing the options previously in the 2.4x game menu.
* Added show framerate/debug/physics/warnings back in game menu.
* Moved these settings from G.fileflags to scene GameData.
* Enabled Display Lists by default.
* Some other small game scene button tweaks.
to show properties.
* One problem is that we currently have 3 different kinds of
property layouts, single column, two column, and single column
with text inside button, probably best to reduce this..
* Last operator panel now shows operator name in the header.
* Fix extrude operator to not include transform properties
anymore, since they are already there now due to macro system.
Another keymap goodie for test fun: Tweak events allow to be limited
to a direction, like North, South-West, etc.
Tested with View3D keymap for border, circle & lasso. Issue to look at
still is whether a border should start immediate, or first draw a cross...
this can be an operator property of course.
Note that tweak code can be extended to corner-gestures too (so you can
do a north+east, north+west, and so on... nice for later).
Time to get keymap saving work! :)
(Fixed bug in Mesh edit circle select, missing notifier)
* Cleaned up code in 3d header; still requires custom code for creating the object mode button, but removed all the nasty V3D_XXXMODE stuff, and the mode switching code is now just an operator call.
Flaw in python UI for headers: code missing to correctly set the total
width of header, plus obsolete call in view3d header template to set width.
Now MMB scroll of view3d header works again.
* Sculpt Menu is now written in python.
* Select Menus are only for Object, Edit and Particle Mode, added code to check on that, fixed Console warnings.
* Fixed a typo in armature buttons, reported in IRC by "ebrain".
* Pose mode was already object-localized, but moved the flag from object->flag to object->mode, with all the other modes.
* Updated object mode RNA
* Commented out some dubious use of base->flag with the posemode flag. So far as I could see the value was only being set, not read, so a hopefully safe change.
* Made texture paint object-localized too.
Note for Brecht: gpu_draw.c had three uses of G_TEXTUREPAINT that I was not able to cleanly fix, so commented out for now. Can you take a look and see what should be done here?
