* All tools where rotation order matters for armature bones have now been adjusted to use the new code
* Transform now uses the new code for bones too. However, there are some jumping issues here that I'm not too sure how to solve yet. Help fixing this is welcome.
This commit is the start of an implementation of (euler) rotation orders for Bones (later to be extended to Objects too).
Technical details and references can be found at:
http://wiki.blender.org/index.php/User:Aligorith/EulerRotationOrder
In short, I've added a new set of Euler conversion functions (EulO... and ...EulO), coexisting with the old functions for now, which can handle different rotation orders.
Changes have only been made to the basic evaluation code. However, the following places will still need modifications:
* Transform code - needs to be made to use functions which take rotation order into account instead of using XYZ only
* Rotation constraints - same story
* Other rotation editing tools for armatures also need a check up, since there might have been some missing code when I ported eulers earlier
- use the scene context for the unit settings since there isn't a better place for it currently.
- added 'chain' to imperial units
- set more rna props to be distances and angles.
* Separated value and range sliders for the value into two separate rows. Value comes before the range settings since it's used more often, and is drawn as a slider instead.
* Tweaked ranges for the sliders so that they will work sanely.
Modal keymaps.
I've tried to make it as simple as possible, yet still using sufficient facilities to enable self-documenting UIs, saving/reading in files, and proper Python support.
The simplicity is: the 'modal keymap' just checks an event, uses event matching similarly to other keymap matching, and if there's a match it changes the event type, and sets the event value to what the modal keymap has defined. The event values are being defined using EnumPropertyItem structs, so the UI will be able to show all options in self-documenting way.
This system also allows to still handle hardcoded own events.
Tech doc:
1) define keymap
- Create map with unique name, WM_modalkeymap_add()
- Give map property definitions (EnumPropertyItem *)
This only for UI, so user can get information on available options
2) items
- WM_modalkeymap_add_item(): give it an enum value for events
3) activate
- In keymap definition code, assign the modal keymap to operatortype
WM_modalkeymap_assign()
4) event manager
- The event handler will check for modal keymap, if so:
- If the modal map has a match:
- Sets event->type to EVT_MODAL_MAP
- Sets event->val to the enum value
5) modal handler
- If event type is EVT_MODAL_MAP:
- Check event->val, handle it
- Other events can just be handled still
Two examples added in the code:
editors/transform/transform.c: transform_modal_keymap()
editors/screen/screen_ops.c: keymap_modal_set()
Also: to support 'key release' the define KM_RELEASE now is officially
used in event manager, this is not '0', so don't check key events with
the old convention if(event->val) but use if(event->val==KM_PRESS)
Disable manipulator drawing while moving. This still use G.moving, but that's acceptable for now (it's sort of a weird display option, after talk with Ton, we couldn't find a good place to set it).
Confirm on LMB up but cancel on RMB down.
This works well with hotkeys, manipulator, RMB+drag and gesture (when they are added back).
The question is do we stick with one scheme for all or have separate keymaps for different "calling mode".
Made transform confirm or cancel on mouse up. More inline with button clicking and better for tablets.
Add operator params to make sure Rip and Extrude turn off PET and Mirror correctly.
Note: sorry for all the whitespace changes, I need to reconfigure this editor not to do autocleanup.
I've gone through all the Animation Editor operators, making sure they send appropriate notifiers, and that these notifiers are handled.
* Added a separate category for animation-related notifiers, since the old-style ones attached to specific datatypes only was turning out to be not too feasible.
* For now, the focus has been on making sure that all Animation Editors update when there have been any potentially suitable changes at all. Later on, we can filter these more carefully to only take the ones we really need (for optimisation purposes)
Brought back the basics for transform manipulators. Martin will
hook it all up to new transform system.
Some notes:
- Still uses G.moving
- BIF_do_manipulator() is called as a View3D Operator
I've tested selecting handles, added a print to confirm
- BIF_GetTransInfo() returns a dummy struct now, just to get
it running.
- Marked some other issues with XXX
Recoded the Transform code for NLA-Strips so that they can now be moved between strips and will not get truncated when they get moved into other non-moving strips.
Todos:
* The current code for moving strips between tracks is buggy (only goes up, and has a tendency to move up without being told to)
* Auto-snapping doesn't work yet...
While trying to fix the mapping conversions for repeat, I came across some limitations with the current (soon to be previous) mapping methods.
Now the mapping conversions should work nicely for all places that use them.
The snapping code was incorrectly assuming that td->extra was always AnimData, but for NLA this is incorrect as it is used for special data used for checking back.
In TweakMode, the keyframes of the Active Action are now shown (and can be edited) in NLA-mapped time, with appropriate corrections applied when editing. This works in the DopeSheet and Graph Editors :)
To do this, got rid of the old wrappers/API-methods, replacing them with new-style ones. A few methods previously (in this branch) used only for evaluation are now used for this purpose too. As the same code is used for editing + evaluation, this should now be much better to work with.
I've only done a few brief tests now, but I think I might've muddled the invert-flags on one or two cases which I'll need to check out tomorrow. So, beware that there may be some weird and critical bugs for the next few days here...
Also, added proper license headers to new NLA files.
TODO:
- testing + bugfixing due to this commit
- show range of keyframes in NLA Editor active-action line
* Moved proportional edit, snap, autokey mode, and a few others
from Scene to ToolSettings.
* RNA wrapped properties in ToolSettings for the UV editor:
proportional edit, snap settings, selection modes.
This commit restores transform support for NLA. Grab, scale, 'extend', and tweak (i.e. grab by just click+dragging) are implemented.
Notes:
- As soon as one end of a strip touches another adjacent strip (within the same track), that end stops moving. This has been done to avoid the situation where overlapping strips within the same track (which is not allowed) might be caused by transforms.
- Made some changes to the RNA setters for the strip extents so that the validation above could take place (and other necessary changes on a per-strip basis could also occur).
TODO's ?
- Strips cannot be transferred from track to track using transforms. I've yet to decide whether this needs to be done, or whether a separate operator will suffice.
- What happens to the range of Actions used when the strips change sizes unexpectedly (i.e. the no-overlap condition above)? Currently range stays the same, but this doesn't always seem desirable?
- Fun for testers: Added "Redo Operator" Panel in view3d 'nkey' region.
It's going to be part of tools UI I know, but this will give good
tests of what goes on with operators. I had to add small fixes in
Transform for it already. :)
One important issue to note is that it lists every operator, also from
non-3D-window ops. Needs checked or classified somehow.
- Fix: removed bad 2.4x hack from how pulldown menus were defined. Made
widget code cleaner, and will show menus like SHIFT+A correct now.
Fix for the 'repeat last operator' option. It didn't work yet well
outside editmode. Now undo/redo has to fully keep the UI alive,
even when called from within a running popup.
Another fix: when regions collapse/hide they were not effectively
disabled, still accepting events. (like Nkey in 3d window).
still is mirror transform. This commits adds the remaining operators:
* UV mapping operators (U key menu): cube, sphere, cylinder, etc.
* Hide/Show operators.
And solves most XXX's, including:
* Fix bad includes and calls into space image.
* Aspect ratio correction.
* Create UVs if they don't exist yet on unwrap.
* Assign image to UVs.
* Drawing proportional edit circle.
* Added back the Subdivide tools. Use the Alt-S hotkey (for now) to get a menu with the subdivision options. There are also two standalone operators which are not used yet.
* Fixed the PoseMode checking callback to make sure that it doesn't override any tools in EditMode.
* Fixed an old comment in transform code, and a few warnings in editarmature.c
* UV Editor Transform, translate, rotate, scale, live unwrap, snap, gesture,
etc work.
* Also for selection operators, used OPERATOR_FINISHED|OPERATOR_PASS_THROUGH
instead of just OPERATOR_PASS_THROUGH to make gestures work, seems more
correct to me.
Made 'select-tweak-grab' work in 3d window, fcurve and nodes.
For nodes it works with both left/right, the others follow
user preset for select.
Tweak is a WM event, which also follows user preset for
tablet-style tweaks (release = apply).
You enable tweak events with an operator WM_OT_tweak_gesture.
Keymap entries can assign to left/middle/right button or to
action/select button tweaks.
I've ported the transform tools for this editor as they existed in the AnimSys2 branch (minus some of the experimental pivot options which were not useful enough yet).
Hotkeys are:
* GKEY - transforms points as always
* RKEY - rotates points (only useful for a single 'knot')
* SKEY - scales points
* EKEY - like in the DopeSheet, the 'extend' translation tool only moves all the keyframes on the same side of the current frame indicator as the mouse
Useful tweaks ported from AnimSys2 include:
* Auto-snapping is on by default for time-values on the keyframes only. Handles are not snapped (or shouldn't be).
* Rotating/Scaling new keyframes using default handles (i.e. Auto-Handles) now works, as the handle is now converted to aligned so that changes can be seen.
* Cleaned up code for borderselect with BKEY. There's still a bug here where y-values don't seem to be getting properly checked, so nothing seems to happen.
* Set up some code for transforming keyframes. It currently uses the wrong code though (i.e. it uses the code for Action Editor which is 1D not 2D, and doesn't have some of the special checks needed). More work on this later.
can transform the strips or move their handles
Still todo, click-drag transform, metastrips support, snapping, markers overlap checks and constrain to valid channels.
View3D four-split: added box-clip for the three ortho
windows. Is all on by default, waiting for headers and
buttons to come back.
Also: hotkey for foursplit now also removes it (toggle)
Also: window_to_3d() function only did delta's,
renamed it to window_to_3d_delta and coded a
real window_to_3d()
View3D has been split now in a local part (RegionView3D) and a
per-area part (old View3D). Currently local is:
- view transform
- camera zoom/offset
- gpencil (todo)
- custom clipping planes
Rest is in Area still, like active camera, draw type, layers,
localview, custom centers, around-settings, transform widget,
gridlines, and so on (mostly stuff as available in header).
To see it work; also added new feature for region split,
press SHIFT+ALT+CTRL+S for four-split.
The idea is to make a preset 4-split, configured to stick
to top/right/front views for three views.
Another cool idea to explore is to then box-clip all drawing
based on these 3 views.
Note about the code:
- currently view3d still stores some depricated settings, to
convert from older files. Not all settings are copied over
though, like custom clip planes or the 'lock view to object'.
- since some view3d ops are now on area level, the operators
for it should keep track of that.
Bugfix in transform: quat initialize in operator-invoke missed
one zero.
Als brought back GE to compile for missing Ipos and channels.
