Jack has not been installed on the buildbot builders for a long time and so
should not be enabled by default to pass strict build options added in D16104.
However for those doing custom builds the option should remain available.
This code mainly tags IDs with `ID_RECALC_SOURCE` when one of their file
paths is modified by `BKE_bpath_foreach_path_id`.
In addition, a check is added to `BKE_sound_evaluate` to call similar
code as when `ID_RECALC_AUDIO` is used.
Finally, Sergey added some changes to relations buildings between
components for Sound IDs in the depsgraph, linking `PARAMETER` to
`AUDIO`.
Maniphest Tasks: T101326
Differential Revision: https://developer.blender.org/D16528
Imgaes which are render results and the like should not be considered as
unused, even if they do not have actual users.
NOTE: this does not apply to 'regular' images, which should be purged by
the recursive purge code, even if they are currently shown in an Image
Editor (this is not actual data usage).
This is really old decision which should have been revisited as soon
as an overlapped release cycle was introduced.
The initial reasoning for such branch name override was to make it so
corrective releases have the same branch as the initial release when
we followed fully linear release cycle.
Nowadays such branch override is confusing and could even be misleading.
There are no add-ons using this property so it is very unlikely that
this is a breaking change.
The `animdata_filter_mask()` was not respecting the filter flag of
`ANIMFILTER_FCURVESONLY` which lead to cases when animation system
element is effectively cast from `MaskLayer*` to `FCurve*`.
The proposed solution more closely follows the GreasePencil filtering
makes it so when `ANIMFILTER_FCURVESONLY` flag is uses no mask layer
channels will be added.
Differential Revision: https://developer.blender.org/D16498
If the edge you are going to slide along is very close to in line
with the adjacent beveled edge, then there will be sharp overshoots.
There is an epsilon comparison to just abandon loop slide if this
situation is happening. That epsilon used to be 0.25 radians, but
bug T86768 complained that that value was too high, so it was changed
to .0001 radians (5 millidegrees). Now this current bug shows that
that was too aggressively small, so this change ups it by a factor
of 10, to .001 radians (5 centidegrees). All previous bug reports
remained fixed.
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
Many reports and a few labels used string formatting without
explicitly calling tip_() or iface_(), so the untranslated message
was used instead of the translated one, even when it was extracted.
Differential Revision: https://developer.blender.org/D16405
The default name when saving a screen capture in an unsaved .blend
file is "screen.<ext>". This can be translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16486
Some of these functions should use locks although they didn't show up
as needing locks at runtime (using valgrind's helgrind), as some aren't
called often or aren't used at all. Add locks for correctness & to
prevent errors in the future.
- GHOST_SystemWayland::disposeContext
- GHOST_SystemWayland::getAllDisplayDimensions
- GHOST_SystemWayland::getButtons
- GHOST_SystemWayland::getMainDisplayDimensions
- GHOST_SystemWayland::getNumDisplays
- GHOST_WindowWayland::setWindowCustomCursorShape
libdecor has a workaround where creating the window would loop until
the windows configure callback ran.
Simplify this workaround by setting the initial state on the underlying
xdg_toplevel struct.
Also correct mixup between bool / GHOST_TSuccess types.
Also, single point cyclic Catmull Rom curves aren't evaluated properly.
Cyclic is meant to make no difference in that case. Now they correctly
evaluate to a single point.
After rB716ea1547989 the UV overlay is no longer displayed in
the UV Editor. It only appears for the Image Editor.
So restore the previous behavior, displaying the "UV shadow"
overlay in the UV editor as well.
Reviewed By: Jeroen Bakker, Germano Cavalcante
Maniphest Tasks: T92614, T100926
Differential Revision: https://developer.blender.org/D16490
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Previously these were only written to the console with no UI feedback
whatsoever. Just a bit nicer to give the user some info that something
went wrong.
See also T102495.
Differential Revision: https://developer.blender.org/D15732
The main problem is that the node tree was not properly updated
after a property in the tree changed. More specifically, the collection
pointer in the Collection Info node was cleared, but the node tree
was not updated after that (usually this is handled by rna updates).
Differential Revision: https://developer.blender.org/D16289
Some operator layout buttons with custom text did not get the proper
context: they'd get * instead of Operator.
This was probably never noticed because the only operator that
actually had this issue was Import Images as Planes in the Add menu.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D15993
The property assignment operators' tooltips were never actually
translated when they were constructed dynamically from the description
in the prop's RNA.
This was visible when using such operators in menus (example I found
was the Marker Settings, Shift + E in the Movie Clip Editor).
"%s: %s" is already extracted elsewhere, might as well use it.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16439
- The label for modal keymaps was extracted but did not use the proper
context on translation.
- Same goes for modal keymap items.
- Extract the UI messages from rna_keymap_ui.py
- Translate global keymap names.
- Use the proper context in the status bar for the tool prompt operator
Ref T102071
Maniphest Tasks: T102071
Differential Revision: https://developer.blender.org/D16348
Regression introduced by {rB601995c3b86986cf8f8e5b6e5a65bcfa7f8f2e32}.
Noticed by Heist project as they render final frames with workarounds enabled.
The mentioned patch introduces attaching VBO as textures. This used to be
done by the caller. The mechanism used a different order hence the VBO
could still be unbound when using. This cannot be solved inside the new
mechanism clearly so this patch will just bind when the buffer isn't bound
just before the drawing command is sent to the GPU driver.
Avoid keeping allocated overly large events_pending vector in case of
long delays between processing events.
While in practice this isn't likely to cause problems, it's better to
avoid keeping unnecessarily large allocations.
Also remove invalid comment.
Consume events in a thread to prevent Wayland's event buffer from
overflowing Waylands internal buffer and closing the connection.
From a users perspective this seemed like a crash.
Details:
- This is a workaround for a known bug in Wayland [0].
Threaded event handling has been if-defed so it can be removed when
it's no longer needed.
- GTK & QT use threaded event handling to avoid this problem
(SDL on the other hand doesn't).
- The complexity and number of locks needed to handle events in a
separate thread is a significant down-side, but as far as I can see
this is necessary.
- Re-connecting to the Wayland server is possible but not practical as
the OpenGL context is lost and as far as I can tell it's not possible
to keep it active (see: D16492).
[0]: https://gitlab.freedesktop.org/wayland/wayland/-/issues/159
Using a single draw works in my tests and I couldn't reproduce the
issue noted in the comment.
Also apply minor cleanup, assigning a variable before calling methods to
reduce diff-noise in planned changes.
Adjusts behavior for trimming Bezier curves, specifically the outer
Bezier handles for the endpoints which do not influence the actual
curve. Handles are only adjusted if they lie within the same segment
with at most one endpoint being a control point (unless they are the
same in which handles are set to the point itself). The result yields
a curve in which the trim result can be inverted by re-setting the
cyclic property for the curve using 'Set Spline Cyclic' node
(iff both trim endpoints lie within a segment).
Differential Revision: https://developer.blender.org/D16488
Patch fixes versioning issue with NURBS files saved with Blender
version from commit 45d038181a to 0602852860 and opened with
Blender version from commit 0602852860. Cyclic Bezier NURBS
saved and then opened with Blender versions mentioned above
changed their shape.
Bug was reported in comments of T101160, circle problem.
Differential Revision: https://developer.blender.org/D16503
The weird code dealing with `MeshPrimitive` didn't increment the
material indices pointer for geometry types besides triangle fans.
Also use a proper accessor to avoid adding a duplicate material
indices attribute, just in case this code is used on existing meshes.
Selection range is +/-7 pixels to actual clicked position, but strip selection
was biased towards rightmost strip.
To make selection more intuitive, select closest strip to clicked position, and
stop iterating when strip intersects clicked pixel.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15728
To override the default quality and filepath. After changes to unify the image
operator and this method, the quality changed from 75 to 90 to make both
consistent. However there was no way to lower the quality to match the previous
behavior, this adds support for that.
Ref T102421
