Detect unlikely situation of an area (that is smaller than our allowed
minimums) sharing an edge that will be moved during a join.
See D16519 for more details.
Differential Revision: https://developer.blender.org/D16519
Reviewed by Campbell Barton
This code mainly tags IDs with `ID_RECALC_SOURCE` when one of their file
paths is modified by `BKE_bpath_foreach_path_id`.
In addition, a check is added to `BKE_sound_evaluate` to call similar
code as when `ID_RECALC_AUDIO` is used.
Finally, Sergey added some changes to relations buildings between
components for Sound IDs in the depsgraph, linking `PARAMETER` to
`AUDIO`.
Maniphest Tasks: T101326
Differential Revision: https://developer.blender.org/D16528
The draw locking was implemented for project Heist and moved behind an experimental
feature after it became clear there were issues with it. Nowadays it isn't used,
and the idea is to replace it with a different solution after all draw engines have
been ported to the new draw manager API. {T102180}
This patch will remove the experimental feature as it isn't used, or useful.
Imgaes which are render results and the like should not be considered as
unused, even if they do not have actual users.
NOTE: this does not apply to 'regular' images, which should be purged by
the recursive purge code, even if they are currently shown in an Image
Editor (this is not actual data usage).
The `animdata_filter_mask()` was not respecting the filter flag of
`ANIMFILTER_FCURVESONLY` which lead to cases when animation system
element is effectively cast from `MaskLayer*` to `FCurve*`.
The proposed solution more closely follows the GreasePencil filtering
makes it so when `ANIMFILTER_FCURVESONLY` flag is uses no mask layer
channels will be added.
Differential Revision: https://developer.blender.org/D16498
The N in `Compiling Shaders N` in Text Info, is the number of how many
shaders are left in the queue. It's a countdown, but this wasn't mentioned
and led to confusion.
Ideally this text would be like Cycles' "Samples 50/100", but in EEVEE it's
not easy to guess how many shaders are left (this number could even go
up mid-compilation).
In the past there used to be a progress bar but it's also confusing because
it could be 90/100 shaders done, but the remaining 10 are slow to compile.
Change the text to "Compiling Shaders (N remaining)" so it's easier to
understand what is going on. Similar to how some game engines do.
Nodes that were not connected to any output could still impact performance.
While they were never executed, sometimes their inputs could keep references
to geometries that other nodes want to modify. That caused unnecessary geometry
copies, because a geometry can only be modified if it is not shared.
Now, inputs that will never be used are tagged accordingly and they will never
have references to geometries that others might want to modify.
If the edge you are going to slide along is very close to in line
with the adjacent beveled edge, then there will be sharp overshoots.
There is an epsilon comparison to just abandon loop slide if this
situation is happening. That epsilon used to be 0.25 radians, but
bug T86768 complained that that value was too high, so it was changed
to .0001 radians (5 millidegrees). Now this current bug shows that
that was too aggressively small, so this change ups it by a factor
of 10, to .001 radians (5 centidegrees). All previous bug reports
remained fixed.
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
The default name when saving a screen capture in an unsaved .blend
file is "screen.<ext>". This can be translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16486
This only applies to procedural operations rather than edit mode
operations, but it might save some recalculations of these caches
for the transform geometry node in some cases.
The calls in the remesh operator were unnecessary because the mesh is
about to be replaced anyway, and nothing invalidates the caches, and
the call in BMesh -> Mesh conversion was unnecessary because the caches
are cleared at the top of the function already.
These were redundant for one of a few reasons:
- A call to `BKE_mesh_tag_coords_changed` was correct instead
- A mesh has dirty normals when created from scratch anyway
- The call was redundant with `BKE_mesh_runtime_clear_geometry`
Separate freeing and clearing mesh runtime data in a more obvious way.
This makes it easier to see what data is meant to be cleared on certain
changes, rather than conflating it with freeing all of the runtime
caches.
Also comment and reduce the surface area of the "mesh runtime" API.
The redundancy in some functions made it confusing which one should
be used, resulting in subtle bugs or unnecessary boilerplate code.
Also, now bke::MeshRuntime is able to free all the data it owns by
itself, which makes this area easier to reason about. That required
changing the interface of a few functions to avoid passing Mesh when
they really just dealt with some runtime struct.
With more RAII semantics in the future, more of this manual freeing
will become unnecessary.
Also, single point cyclic Catmull Rom curves aren't evaluated properly.
Cyclic is meant to make no difference in that case. Now they correctly
evaluate to a single point.
After rB716ea1547989 the UV overlay is no longer displayed in
the UV Editor. It only appears for the Image Editor.
So restore the previous behavior, displaying the "UV shadow"
overlay in the UV editor as well.
Reviewed By: Jeroen Bakker, Germano Cavalcante
Maniphest Tasks: T92614, T100926
Differential Revision: https://developer.blender.org/D16490
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
Bounding box calculation can be a large in some situations, especially
instancing. This patch caches the min and max of the bounding box in
runtime data of meshes, point clouds, and curves, implementing part of
T96968.
Bounds are now calculated lazily-- only after they are tagged dirty.
Also, cached bounds are also shared when copying geometry data-blocks
that have equivalent data. When bounds are calculated on an evaluated
data-block, they are also accessible on the original, and the next
evaluated ID will also share them. A geometry will stop sharing bounds
as soon as its positions (or radii) are changed.
Just caching the bounds gave a 2-3x speedup with thousands of mesh
geometry instances in the viewport. Sharing the bounds can eliminate
recalculations entirely in cases like copying meshes in geometry nodes
or the selection paint brush in curves sculpt mode, which causes a
reevaluation but doesn't change the positions.
**Implementation**
The sharing is achieved with a `shared_ptr` that points to a cache mutex
(from D16419) and the cached bounds data. When geometries are copied,
the bounds are shared by default, and only "un-shared" when the bounds
are tagged dirty.
Point clouds have a new runtime struct to store this data. Functions
for tagging the data dirty are improved for added for point clouds
and improved for curves. A missing tag has also been fixed for mesh
sculpt mode.
**Future**
There are further improvements which can be worked on next
- Apply changes to volume objects and other types where it makes sense
- Continue cleanup changes described in T96968
- Apply shared cache design to more expensive data like triangulation
or normals
Differential Revision: https://developer.blender.org/D16204
Previously the UV unwrapping handling for subsurf modifiers used
`DerivedMesh`to implement the subdivision. Since we're trying to remove
`DerivedMesh` in general, and since this just made use of the `Mesh`
data anyway, it's relatively simple to remove it here. Combined with
D15939, this makes it possible to remove more `DerivedMesh` code.
Differential Revision: https://developer.blender.org/D16487
Using a vector to store assets means we have to lookup the position of
the asset to be able to remove/free it. Use a `blender::Set` instead for
(nearly?) constant time removal.
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Asset library data is destructed on file load. Asset lists (weak and
hopefully temporary design) contain pointers into it that would dangle
then. Make sure the asset lists are destructed before the asset library
data.
Previously these were only written to the console with no UI feedback
whatsoever. Just a bit nicer to give the user some info that something
went wrong.
See also T102495.
Differential Revision: https://developer.blender.org/D15732
