* Enable cache for high res + new preview
* Bugfix for smoke banding (in cooperation with N_T)
Hint: Work-in-progress regarding collision objects so can be broken, didn't test
Hint2: jahka enabled a general particle panel but
* bake button doesn't work
* step is not supported for cloth
* several other things there ;)
* Split object_edit.c into multiple files:
object_add.c, object_edit.c, object_hook.c, object_relations.c,
object_select.c, object_transform.c.
* Rename files to have consistent object_ and mball_ prefix:
object_shapekey.c, object_lattice.c, object_vgroup.c, mball_edit.c.
* Added operators:
* vertex group menu and set active
* apply location, rotation, scale, visual transform (location is new)
* make local
* make vertex parent
* move to layer
* convert to curve/mesh (not finished yet)
* Many small fixes for marked issues, but still much code to be cleaned
up here...
* Added a new option ('Fixed Position') for Follow Path constraint which allows you to constrain an object/bone to some fixed position along the curve. Unlike the default mode of operation, this doesn't depend on time unless you explicitly animate the offset percentage parameter associated with this.
* Made old (pre 2.5) files saved with armatures in pose mode load in pose mode again.
- rename "Nurb" to "Spline" in RNA, eg. bpy.data.curves[0].splines[2].type == 'NURBS'
from a user perspective spline is a more generic term while Nurb is misleading when used for beziers and poly lines.
- added curve.active_spline property so the python UI can display the last selected curve.
- set the active spline when entering editmode (uses first selected spline)
- added back Hide Handles as a curve property (removed the global flag), access from the view panel in editmode.
- added hide normal option for curve, normal size access for curve and mesh display.
- changing orderU/V, endpoints, cyclic, bezierU/V now work in editmode and calls update functions.
- entering editmode was crashing with text objects
- curve.switch_direction() crashed (own fault from last commit)
- Tkey for tilt was overridden by Toolbar, made Tilt Ctrl+T.
- OBJECT_OT_mode_set check for compatible modes before running - so curves dont try go into paint mode with V key for eg.
moved CU_2D to Nurb->flag in do_versions
This made simple type checks confusing to read.
many... if( (nu->type & 7)==CU_BEZIER)
replaced with ... if(nu->type == CU_BEZIER)
made setting rna curve_2d clamp the Z values. still more RNA/UI changes to do.
* Copy Rotation constraint should now work ok with this new code again. Previously, it was the only thing that really went beserk when the typos were still uncaught.
* Fixed one other case of a potential case where typos would cause problems.
* Made changing the rotation order setting perform conversions of the current rotation to an equivalent representation in the other orders/forms. This is done at RNA level, so maybe not that great for switching representations while animating?
- Moves hair from face-space to global space and back.
- Allows for editing of emitter mesh after hair combing.
- Disconnect hair before doing topology changing changes in mesh edit mode, connect after changes.
- Notes:
* The closest location on emitter surface to the hair root is used to connect the hair.
* Emitter deflection, sticky roots and add brush don't apply for disconnect hair in particle mode.
- Todo for future:
* Copy disconnected hair from object to another (when 2.5 has proper copy operators again).
* Possible automatic disconnect/connect with topology changing operations in mesh edit mode.
Other changes/fixes:
- Proper subtypes for some particle mode notifiers.
- Particle mode selections didn't draw correctly because of using lighting for the paths.
http://www.graphicall.org/ftp/ideasman42/curve_auto_twist.png
Access next to the "3D" edit button.
details...
- open curves use the first points orientation and minimize twist for each new segment.
- cyclic curves calculate the least twist in both directions and blend between them
- AxisAngleToQuat replaced inline code.
- Notice the model on the right now has more even corners. added Vec3ToTangent to arithb.c.
* bring back 'player' libtype, after investigation with ideasman.
scons/mingw works nicely, for some reason msvc fails to link still, will look further into it.
NOTE: this needs changes to stubs.c, but need to check with ideasman_42 how to fix with cmake. Probably linking order issues, but stubs.c currently generates warnings for msvc (redefinition of funcs) and errors for mingw (same redefinitions). Removing the offending lines from stubs.c fixes that.
- Some big refresh issues with softbody & cloth point cache usage should now be fixed.
- Removed sticky objects from particles (better stuff will come back when I get to updating reactor particles).
- Some initial easy memory efficiency cleanup for ParticleData struct. The ultimate goal is to get particles less memory hungry -> more particles possible in single scene.
- Wrong path timing clamping caused hair particles to seem disappeared when changing between normal<->hair particles.
- "Calculate to current frame" in cache buttons baked instead of the intended function.
- Boids particle data is now a bit better organized.
Make local and make single user are back for ID template.
Internally these calls got unified, id_make_local and
id_copy are now used to do these operations for all types
that support it. Also reveals that for some ID types the
implementation is still missing.
Further, some small changes:
* unlink_text is now in blenkernel.
* copy_group was implemented.
* ID template now has an open operator again.
* fix preview to not change material reference count,
even if temporary it shows up with threaded preview.
* id_unlink unifies unlink for text, object and group.
Notifiers
---------
Various fixes for wrong use of notifiers, and some new notifiers
to make things a bit more clear and consistent, with two notable
changes:
* Geometry changes are now done with NC_GEOM, rather than
NC_OBJECT|ND_GEOM_, so an object does need to be available.
* Space data now use NC_SPACE|ND_SPACE_*, instead of data
notifiers or even NC_WINDOW in some cases. Note that NC_SPACE
should only be used for notifying about changes in space data,
we don't want to go back to allqueue(REDRAW..).
Depsgraph
---------
The dependency graph now has a different flush call:
DAG_object_flush_update(scene, ob, flag)
is replaced by:
DAG_id_flush_update(id, flag)
It still works basically the same, one difference is that it now
also accepts object data (e.g. Mesh), again to avoid requiring an
Object to be available. Other ID types will simply do nothing at
the moment.
Docs
----
I made some guidelines for how/when to do which kinds of updates
and notifiers. I can't specify totally exact how to make these
decisions, but these are basically the guidelines I use. So, new
and updated docs are here:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/NotifiersUpdateshttp://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers
* further cleaning of 'player' stuff. Now only 3 libs are remaining, of which ideally the stubs lib will be fixed at some point, fading away into the dark history of not-so-nice code. The current blenderplayer part is still a little bit hackish, I'll see if I can find a better alternative, for now it works good enough.
* first working changes to get blenderplayer linking
* blenderplayer/ moved into source/ (CMakeLists.txt changed for that too)
* added externs for bprogname to gp_ghost, so that it links properly
* Added a 'rotOrder' parameter for constraint evaluation objects and constraint targets, which describes the rotation mode used for the matrices there.
Todos:
* Constraint targets default to using XYZ only for now. This will need be be addressed eventually.
* Copy Rotation constraint currently cannot use the new rotation order code for the target matrix. What's surprising is that even though it's just using XYZ as the old code did, it doesn't work, and yet everything else works nicely. Silly constraint! (it is almost impossible to improve this constraint further without breaking a rig out there)
This commit is the start of an implementation of (euler) rotation orders for Bones (later to be extended to Objects too).
Technical details and references can be found at:
http://wiki.blender.org/index.php/User:Aligorith/EulerRotationOrder
In short, I've added a new set of Euler conversion functions (EulO... and ...EulO), coexisting with the old functions for now, which can handle different rotation orders.
Changes have only been made to the basic evaluation code. However, the following places will still need modifications:
* Transform code - needs to be made to use functions which take rotation order into account instead of using XYZ only
* Rotation constraints - same story
* Other rotation editing tools for armatures also need a check up, since there might have been some missing code when I ported eulers earlier
* Convert operator - can currently be used to convert active Grease Pencil layer to curves. I had a look at making this part of a special "curve sketching" macro, though it seems that we cannot have modal operators coming first in a macro (and also cannot specify operator calling modes)
* Delete Active Frame operator - does what its name say it does. It deletes the active frame for the active layer of Grease Pencil sketches.
* Restored option to have strokes aligned to screen space. By default, this is not enabled (the setting for view-space is the default instead).
* Fixed bugs related to drawing/erasing in screen space.
- Baked point caches for particles, cloth and softbody can now be edited in particle mode.
* This overwrites the old cloth/sb cache editmode editing.
* The type of editable system is chosen from a menu.
* For particles the current particle system and it's current cache are used.
- Currently this only works for caches that are in memory, but some automatic conversion from disk to memory and back can be implemented later.
- All tools from hair editing can't be applied to point caches and are hidden in the tool panel and specials menu. Some functionality like subdividing paths can be later implemented in a slightly different way from how it works for hair.
- Code is not yet optimized for speed, so editing might be slow sometimes.
Known issues:
- Cloth doesn't update properly while in particle mode, due to the way cloth modifier currently works. Daniel can you check on this?
- As "particle mode" is not only for particles any more some other name would be in place?
- Better icons are needed for the path, point, and tip-modes as the current icons from mesh edit mode are quite misleading.
- Direct editing of point velocities is not yet implemented, but will be in the future.
Other changes:
- Hair editing doesn't require a "make editable" button press any more.
- Multiple caches in single particle system disables changing emission properties.
- Unified ui code for all point cache panels.
* Defined in buttons_particle.py and imported for cloth, smoke & softbody.
- Proper disabling of properties in ui after baking point caches. (Daniel could you please make needed disable code for smoke panels as their functionality is not familiar to me.)
- Hair weight brush has been removed. Once hair dynamics is re-implemented I'll code a more useable alternative to the functionality.
Bug fixes:
- Unlinking particle settings crashed.
- Deleting the active object with particles in the scene crashed.
- Softbody didn't write point caches correctly on save.
* Shuffled some code around, and renamed some functions used for getting context info
- Split UI-buttons into a separate file from stroke-drawing code
- Removed some obsolete code (i.e. old paint code that used to be in _edit, but which has been moved to _paint).
* Made drawing in 3D-View default to using the active object as the owner of the Grease Pencil data. For now, the drawing code will therefore only show the GP data for the active object only. More work to come on this.
* Fixed freeing code for Objects/Scenes with GP data.
Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
Example code: http://www.pasteall.org/7332/c.
New API functions: http://www.pasteall.org/7330/c.
Maximum number of dimensions is currently limited to 3, but can be increased arbitrarily if needed.
What this means for ID property access:
* MeshFace.verts - dynamic array, size 3 or 4 depending on MFace.v4
* MeshTextureFace.uv - dynamic, 2-dimensional array, size depends on MFace.v4
* Object.matrix - 2-dimensional array
What this means for functions:
* more intuitive API possibility, for example:
Mesh.add_vertices([(x, y, z), (x, y, z), ...])
Mesh.add_faces([(1, 2, 3), (4, 5, 6), ...])
Python part is not complete yet, e.g. it is possible to:
MeshFace.verts = (1, 2, 3) # even if Mesh.verts is (1, 2, 3, 4) and vice-versa
MeshTextureFace.uv = [(0.0, 0.0)] * 4 # only if a corresponding MFace is a quad
but the following won't work:
MeshTextureFace.uv[3] = (0.0, 0.0) # setting uv[3] modifies MTFace.uv[1][0] instead of MTFace.uv[3]
I hoped for it to resolve the bug of loading sounds with relative paths didn't work, but Main.name isn't set before the sounds are loaded, so the bug resists!
Someone who is into file loading should please fix this!
Finally in 2.5 branch :)
Still things to do, but will continue working in here. I won't bother
repeating the commit messages from the last year or so, however I've
written up some technical docs to help Ton/Brecht/etc review and find
their way around the code:
http://wiki.blender.org/index.php/User:Broken/VolumeRenderingDev
That above page has some known issues and todos listed, but I'm still
interested in bug reports.
Credits for this code:
* Matt Ebb
(with thanks to Red Cartel/ProMotion Studios)
* Raul Fernandez Hernandez (Farsthary) for patches:
o Light cache based multiple scattering approximation
o Initial voxeldata texture code
o Depth Cutoff threshold
* Andre Susano Pinto for BVH range lookup addition
* Trilinear interpolation adapted from pbrt
* Tricubic interpolation from libtricubic
Wrapped the Keying Sets API with RNA Functions so that they can now be called from Py-Scripts. This will ultimately be useful for riggers to create Keying Sets which can get loaded up/created for animators to use after importing their rig.
I've created a demo for this, which can be found at:
http://www.pasteall.org/blend/552
Notes:
- Kazanbas, I've had to create a rna_scene_api.c here to hold some of the relevant functions. Hopefully this won't cause you too much pain when you do your next merge from 2.5 to your branch ;)
- I've noticed that there seem to be a few cases mentioned in the demo which don't totally work yet. I'll commit some fixes for those later.
* F-Modifiers on F-Curves can now taken into account when calculating the extents of actions. This is used when there are some NLA strips and some action with some F-Modifiers is being played back on top of those.
* The toggles in the NLA channels list now respect the width of the list instead of using a hardcoded position. This means that clicking on these toggles when the list is resized works again.
