libdecor (for window decorations) was crashing on exit with the shader
builder, avoid the crash by calling the "background" system creation
function which doesn't initialize window management under Wayland.
Re-order checks to ensure a zeroed matrix results in a quaternion
without rotation. Also avoid some redundant calculation where the
'trace' was calculated but not used, flip the scaling value early
on instead of negating the quaternion after calculating it.
This fixes a bug in the function that determines what properties to show
on the Decimate Keyframes operator.
Before the fix, the "Remove" (i.e., `factor`) slider was visible no
matter what "Mode" was being used. This meant that the slider was
visible and modifiable when it had no effect, creating confusion.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16318
In anticipation of UV Copy+Paste, we need fast access to indices
of unique UvElements. Can also be used to improve performance and
simplify code for UV Sculpt tools and UV Stitch.
No user visible changes expected.
Maniphest Tasks: T77911
See also: D16278
The issue was caused by refactoring, see 7afcfe111a. Function
`SEQ_transform_fix_single_image_seq_offsets` modified offsets after
handle was moved, but this was not done correctly.
Remove function mentioned above and move strip start when moving left
handle of strips that have only single frame of content by design
(image, text, color, ...).
Motivated by long loading times in T101969, reduces render preparation time from 14sec to 6sec.
Another possible improvement would be to use C++ and template based on OCIO vs. sRGB,
but moving the file to C++ seems nontrivial (and opens up the question whether ocio_capi
makes any sense then or we should just use OCIO directly) so I left it at a direct 1:1
parallelization of the existing code for now.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16317
Simplify API and improve accuracy of uv packing placement
by using pre-translation and double precision internally.
Will protect against future precision problems with UDIM.
No user visible changes expected.
Maniphest Tasks: T68889
Differential Revision: https://developer.blender.org/D16362
The preferred domain is used to decide which domain the viewer node
should use when set to "Auto" domain. This commit adds it to some curve
input nodes and the curve and mesh topology nodes. This makes debugging
node setups with these nodes a bit faster and less frustrating.
The "all curve" sampling is implemented as two functions internally.
The first finds which curve each "global" sample should be on. Then
the second is the regular evaluation and sampling in that curve.
The first operations creates lengths, but they were processed as
factors when passed to the second function.
Effect strip start position was translated twice. This is caused by
recent refactoring, see 7afcfe111a.
Don't change `seq->start` of attached effect strips during translation
and only rely on `seq_time_update_effects_strip_range` function.
The node has always be a bit confusing for the NURBS case, since it
uses the distance between control points since the evaluated/control
point mapping isn't obvious, but it also went above 1, which wasn't
correct.
Instead, retrieve the total length from the point lengths calculated
in the previous step. The results should be the same for other curve
types.
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
Not quite sure why {rBd37d17019c52} forcefully set the Mesh to NULL if
in editmode, but this caused the attribute lookup to fail/crash.
Now only use the attribute if we have the mesh (reducing the scope where
it is used), bmesh editmode case does not rely on it.
Maniphest Tasks: T102318
Differential Revision: https://developer.blender.org/D16406
The auto-masking was working by Brush and this was very
inconvenient because it was necessary set the options by
Brush, now the options are global and can be set at once.
Also, the automa-masking now works with `and` logic
and not with `or` as before. That means that a stroke
must meet all the conditions of the masking.
Added new Layer and Material options to masking the
strokes using the same Layer/Material of the selected stroke.
Before, only Active Layer and Active Material could be masked.
The options of masking has been moved to the top-bar using
the same design of Mesh Sculpt masking.
As result of the changes above, the following props changed:
Removed:
`brush.gpencil_settings.use_automasking_strokes`
`brush.gpencil_settings.use_automasking_layer`
`brush.gpencil_settings.use_automasking_material`
Added:
`tool_settings.gpencil_sculpt.use_automasking_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_stroke`
`tool_settings.gpencil_sculpt.use_automasking_material_stroke`
`tool_settings.gpencil_sculpt.use_automasking_layer_active`
`tool_settings.gpencil_sculpt.use_automasking_material_active`
Reviewed by: Julien Kaspar, Matias Mendiola, Daniel Martinez Lara
Previously, the code would incorrectly free the passed in custom data
layer even when `CD_ASSIGN` was not used. Now the function actually
supports assigning the data to the layer. This only fixes the case for
custom data layer types that only support a single layer like `CD_MEDGE`.
Informally reviewed by Hans Goudey.
Change the behaviour of circle select on FCurves:
- Before any key is touched, the behaviour is as it was (key included in
circle-select area → select it; otherwise → select entire curve)
- If any key has been touched, an internal option
(`use_curve_selection`) is flipped and selecting the entire curve is
disallowed.
This ensures that once a key changes selection state, it's no longer
possible to select the entire curve. This allows dragging over keys and
subsequently drag over a keyless part of the curve.
Reviewed By: RiggingDojo, troopy28
Maniphest Tasks: T101894
Differential Revision: https://developer.blender.org/D16307
This patch introduces a new `CacheMutex` which makes it easy to implement
lazily computed caches in e.g. `Curves`. For more details see `BLI_cache_mutex.hh`.
Differential Revision: https://developer.blender.org/D16419
When changing the texture paint slot index or activating a Texture Node, the texture displayed in the Image Editor changes accordingly.
This patch syncs the Image Editor when a new texture paint slot was added, which currently is not the case.
Also deduplicates some code.
Rotation and scale was done around the wrong center (always around mouse
position) in paint_draw_tex_overlay [on the other hand,
paint_draw_cursor_overlay already got the center right].
Now make the center dependent on UnifiedPaintSettings "draw_anchored".
Maniphest Tasks: T102312
Differential Revision: https://developer.blender.org/D16418
The color-band needs to do some special, rather awkward updating of the
UI state when certain values are changed. As @lichtwerk noted in the
report, this was done to the wrong buttons. Now lookup the proper
buttons, and don't assume that `uiItemR()` only adds a single button
(which often isn't the case).
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
