* Based on what happens during simulation the cache is marked (also in cache panel, this could possibly be extended to 3d view as well) as:
- exact (not marked)
- outdated (simulation is not done completely with current settings)
- non-exact (frames were skipped during simulation)
* The parameter "cache step" effects the number of frames between saved cache frames.
- This can save a lot of memory (or disk space) if absolutely frame accurate simulation is not required.
- Speeds up the "quick caching" very much.
- Frames between cached frames are interpolated from the cached frames.
- Current default value of 10 frames works nicely with up/down-arrows (skip 10 frames forwards/backwards on timeline), but can be changed if wanted.
* The caching can work in normal or "quick" mode:
[Normal cache]
- Basic: Calculate what even happens (settings change, big frame steps etc.) and cache results, if possible try to use "cache step" when saving cache frames.
- Becomes non-exact: After larger than 1 frame steps.
- Becomes outdated: After any change effecting the simulation other than frame steps.
- Pros/cons: Freedom of doing anything and playing with particles, but exact results have to calculated from the beginning.
[Quick cache]
- Basic: Calculate simulation up to current frame automatically on changes with cache step sized jumps in simulation. With multiple "quick cached" simulations the smallest cache step is used.
- Becomes non-exact: Always from frame 1 (unless cache step = 1).
- Becomes outdated: Never.
- Pros/cons: Not very accurate, but super fast!
- Todo: Transform of any animated (non-autokeyed) object is locked! Probably needs some tinkering with anim sys overrides.
* The simulation can be run forwards or backwards even if it's cache is outdated or non-exact, the following rules apply in these situations:
- step forwards (to unknown) -> simulate from last exact frame, store result
- step backwards (to known) -> result is interpolated from existing frames, store result, clear cache forwards if current frame is after last exact frame
* "Calculate to current frame" runs the simulation from start to current frame with a frame steps of 1.
- Baking does the same, but runs the simulation all the way to the end of simulation.
- Rendering does this automatically if the simulation is outdated of non-exact, so all rendered simulations will always be updated and exact.
* Every cache panel also holds buttons to "Bake all dynamics", "Free all dynamics" and "Update all dynamics to current frame".
* Cloth simulation supports the new cache too.
Using LightGroups override for material doesn't work for preview
renders. Code didn't correctly return correct light listbase then,
crashing Blender on preview render.
* removed radiosity render code, DNA and RNA (left in radio render pass options), we'll get GI to replace this probably, better allow baking to vertex colors for people who used this.
* removed deprecated solid physics library, sumo integrations and qhull, a dependency
* removed ODE, was no longer being build or supported
* remove BEOS and AMIGA defines and references in Makefiles.
* Allows moving, rotating & scaling of particle simulations.
* Setting in particle render options.
* Changes viewed & rendered particles from global space to parent space.
* Doesn't effect simulations at all.
* Particles support larger than 1 frame changes, bigger frame changes can result in inaccurate results, but it's super fast and you get a nice feeling of how the particles behave!
* "Cache to current frame" button calculates the exact result of particles at current frame.
* Current state of cache can be protected by making it a bake.
* Cache is now in memory by default, disk cache is an option.
* Only "viewport %" number of particles are calculated and cached in viewport, baking and rendering calculate all particles.
* Info on cached frames and memory usage given in ui.
* Support for exact "autocaching" of changes and large frame changes(disabled for now until exact place in event system is decided)
* "Continue physics" is probably deprecated after this and should be removed once sb & cloth use the new cache code.
Todo:
* Make softbody & cloth use the new cache things.
Other changes:
* Some cleanup of particle buttons.
* Added support for additional file types in the voxel data texture. I added
support for 8 bit raw files, but most notably for image sequences.
Image sequences generate the voxel grid by stacking layers of image slices on top
of each other to generate the voxels in the Z axis - the number of slices in the
sequence is the resolution of the voxel grid's Z axis.
i.e. http://mke3.net/blender/devel/rendering/volumetrics/skull_layers.jpg
The image sequence option is particularly useful for loading medical data into
Blender. 3d medical data such as MRIs or CT scans are often stored as DICOM
format image sequences. It's not in Blender's scope to support the DICOM format,
but there are plenty of utilities such as ImageMagick, Photoshop or OsiriX that
can easily convert DICOM files to formats that Blender supports, such as PNG or JPEG.
Here are some example renderings using these file formats to load medical data:
http://vimeo.com/5242961http://vimeo.com/5242989http://vimeo.com/5243228
Currently the 8 bit raw and image sequence formats only support the 'still'
rendering feature.
* Changed the default texture placement to be centred around 0.5,0.5,0.5, rather
than within the 0.0,1.0 cube. This is more consistent with image textures, and it
also means you can easily add a voxel data texture to a default cube without
having to mess around with mapping.
* Added some more extrapolation modes such as Repeat and Extend rather than just clipping
http://mke3.net/blender/devel/rendering/volumetrics/bradybunch.jpg
* Changed the voxel data storage to use MEM_Mapalloc (memory mapped disk cache)
rather than storing in ram, to help cut down memory usage.
* Refactored and cleaned up the code a lot. Now the access and interpolation code
is separated into a separate voxel library inside blenlib. This is now properly
shared between voxel data texture and light cache (previously there was some
duplicated code).
* Made volume light cache support non-cubic voxel grids. Now the resolution
specified in the material properties is used for the longest edge of the volume
object's bounding box, and the shorter edges are proportional (similar to how
resolution is calculated for fluid sim domains).
This is *much* more memory efficient for squashed volume regions like clouds
layer bounding boxes, allowing you to raise the resolution considerably while
still keeping memory usage acceptable.
Checker: FORWARD_NULL (help)
File: base/src/source/blender/render/intern/source/texture.c
Function: do_lamp_tex
Description: Variable "dx" tracked as NULL was dereferenced.
Also found a typo the 3rd check was checking projx instead of projz
I also expanded the elses to set dyt as well as dxt.
Kent
Checker: FORWARD_NULL (help)
File: base/src/source/blender/render/intern/source/texture.c
Function: do_lamp_tex
Description: Variable "co" tracked as NULL was dereferenced.
co was set to NULL at the beginning of the function and it could
possibly slip through all the logic above so lets test it before
we use it blindly.
Kent
* Missing changes to release/windows/installer
* Sequencer fixes in source/blender/src/seqaudio.c dont apply to 2.5
* brechts fix for #18855 r20763 wasnt merged, does this apply to 2.5?
*Octree works nicely on hierarchic trees
*the old code was quite destructive at the Isect variable
changing isec->start, end, vec..now it only changes isec->labda (and hit results)
Currently rendering a BVH of all objects, where each object has it own octree.
Start of planned DerivedMesh refactoring. The mface
interfaces in DerivedMesh have been renamed to reflect
their new status as tesselated face interfaces (rather
then the primary ones, which are now stored in mpolys).
short review: mpolys store "primary" face data, while
mfaces store the tesselated form of the mesh (generally
as triangles). mpolys are defined by mloops, and each
mpoly defines a range of loops it "owns" in the main
mloop array.
I've also added basic read-only face iterators, which
are implemented for CDDM, ccgsubsurf, and the bmeditmesh
derivedmesh. Since faces are now variable-length things,
trying to implement the same interface as mfaces would not
have worked well (especially since faces are stored as
an mpoly + a range of mloops).
I figure first we can evaluate these simple read-only
face iterators, then decide if a) we like using iterators
in DerivedMesh, b) how much of it should use them, and c)
if we want write-capable iterators.
I plan to write official docs on this design after I get
it more stable; I'm committing now because there's a rather
lot of changes, and I might do a merge soon.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
Preview renders:
- Added proper button type (BUT_EXTRA) for preview buttons, to
handle drawing better. It now first draws an alpha mask, to
ensure the preview is correctly fitting inside the widget style.
It then draws the outline.
- Added protection for executing preview renders while regular
rendering, that's not going to work...
Nice goodie: Preview renders!
- Added new preview.blend, allowing super wide cinemascope previews
- Draws nicely blended inside widget type, rounded corners
- Preview now renders using all available cpus/cores.
- Uses - hopefully rock stable - method, which doesn't copy or
allocate anything for previews, but just uses render API calls.
- Multiple previews are possible! But, added provision in Jobs
manager to only render one preview job at a time. If you start
more preview jobs, they're suspended until it's their turn.
Bugfix: new buttons context code crashed when going full-window.
Tweaks are still needed for notifiers. I have to figure out still
how to retrieve SpaceButs button view types...
-Many things not yet working properly :)
-Experimental new (hopefully more logical) categorization of buttons, feedback on this is very welcome.
-Separate render & draw types, for example now there is actually a render option "halo" instead of all the different point draw types.
-Particles get recalculated only from buttons that actually change something that has to be recalculated, for example changing visualization doesn't reset particles any more.
-Boid physics buttons are still missing as I'm currently redoing the whole boids code.
-Point caching is still very wip, so baking is not possible for example, but I added a few cache baking flags for rna that were/will be needed for particle buttons logic.
Cleanup commit:
- Yafray removed. Also did cmake/scons files, but didn't compile with it,
so test would be appreciated :)
- Removed old crap from Windows release dir, should be checked on
further by windows release builder later.
My bug fix to support AO with "Amb" texture channel changed code too that calls
AO as a pre-shade process, when texture isn't calculated yet. This caused very
first pixel in a tile to show wrong AO.
Especially myself deserves a kick in butt for not testing the regression files
for release binaries again! Error shows clearly... in the cornelius_passes
.blend file.
But I still wonder about its correction because it looks the
oposite of whats documented and of what was used before :S
I also took a long time to find it because I tought blender was feeding the raytrace structure
with quads and triangles but it looks the quads get triangulated before reaching makeraytree (on rayshade.c).
Third transparent shadow bug... this time it's a Material Node, which
has mirror + transp-shadow on, and when it traces its own material it
enters an eternal loop...
Raytracing + shading + materialnode combo really needs work!
* Added material "type" property, with Surface/Volume/Halo
options, compatible with sim_physics, as requested for
material buttons layout. Obviously the Volume setting
does nothing currently.
* Deprecated MA_HALO flag in favor of this.
fix/workaround - offset by a 500th of a pixel to avoid baking missing pixels that are between 2 faces, its still possible pixels could be between faces but much less likely then it is currently with pixel aligned UVs.
