Under some circumstances, simply adding a curve object and going
to edit mode would cause a crash. This is because the evaluated
`CurveEval` was accessed but also freed by the dependency graph.
The fix reverts the part of b76918717d that uses the
`CurveEval` for the curve object bounds. While this isn't ideal,
it was the previous behavior, and some unexpected behavior
with object bounds is much better than a crash. Plus, given the plans
of using the new "Curves" data-block for evaluated curves, this
situation will change relatively soon anyway.
Strip aligning wasn't done when length of 2 strip is equal, but since
these strips are aligned according to position in stream this can
produce offset.
There are two things achieved by this change:
- No possible downcast of size_t to int when calculating motion steps.
- Disambiguate call to min() which was for some reason considered
ambiguous on 32bit platforms `min(int, unsigned int)`.
On an implementation side the `min()` is defined for a fixed width
integer type to disambiguate uint from size_t on 32bit platforms,
and yet be able to use it for 32bit operands on 64bit platforms without
upcast.
Fixes 32bit platforms (such as i386) in Debian package build system.
Differential Revision: https://developer.blender.org/D13992
Added a new "Sharpen Less" kernel to the filter compositor node. The intent here is to provide a much less aggressive sharpening filter that can't simply be solved by toning down the factor on the existing sharpen filter.
The existing "Sharpen" filter uses a "box" kernel:
```
-1 -1 -1
-1 9 -1
-1 -1 -1
```
The new "Sharpen Less" filter uses a "diamond" kernel:
```
0 -1 0
-1 5 -1
0 -1 0
```
The difference between the two is clear to see in the following side-by-side:
{F12847431}
Below shows the difference between the filtering kernels as applied to a B&W render of Suzanne with the UV grid as a texture. The left side of the render using the existing "Sharpen" filter, and the right side showing the new "Sharpen Less" filter. Notice that the left side is more aggressive in accentuating localized contrasts across the image. This can lead to what appears to be aliasing or striations in the resulting image:
{F12847429}
https://developer.blender.org/T95275https://blender.community/c/rightclickselect/57Kq/?sorting=hot
{F12847428}
Reviewed By: #compositing, jbakker
Differential Revision: https://developer.blender.org/D14019
This is almost always meaningless as most code has changed
since the comment was added. Besides this, version control can be used
to check if/when a file was modified.
Some cases of this were kept when they contain details
about the original copyright holder.
Order copyright immediately after the license block,
this was done almost everywhere with a few exceptions.
Remove authors from a few files (we had already removed "Contributors"
section however with old patches being applied this gets added back in).
Also move descriptive text into the doxygen comment block under \file.
In some cases remove the text as it was accidentally copied.
GHOST_ISystem::toggleConsole had a somewhat misleading name
it could be fed 4 different values, so it was not as much a
toggle as a set console window state.
This change renames `toggleConsole` to a more appropriately
named `setConsoleWindowState` and replaces the integer it had
to an enum so it's easy to tell what is being asked of it at
the call site.
Reviewed By: LazyDodo
Differential Revision: https://developer.blender.org/D14020
Symmetrize Armature now also symmetrizes the transform of custom bone
shapes.
Adds a new property to `bpy.ops.armature.symmetrize`:
//Parameters//:
- **direction **(enum in ['NEGATIVE_X', 'POSITIVE_X'], (optional)) –
**Direction**, Which sides to copy from and to (when both are selected)
- **custom_shape **(enum in ['SYMMETRIZE_SAME', 'SYMMETRIZE_ALL',
'SYMMETRIZE_NONE'], (optional)) – **Custom Shapes**, Wether to
symmetrize non symmetric custom bone shapes, all custom shapes, or
none at all
//Rationale//:
Reviewed By: #animation_rigging, Mets, sybren
Maniphest Tasks: T91871
Differential Revision: https://developer.blender.org/D13416
Add files with extension ".woff" and ".woff2" to FILE_TYPE_FTFONT
file type. Allows selecting and using these types of font files.
See D13822 for more details.
Differential Revision: https://developer.blender.org/D13822
Reviewed by Campbell Barton
Avoid using the uint64_t as an intermediate cast since it complicates
behavior for signed types (which first need to be cast to an int64_t).
Assign both old_value_i & old_value_f from the original value to avoid
the need for different handling of signed/unsigned types.
Reviewed By: JacquesLucke
Ref D14039
A Bump node without a Height input is meaningless and does nothing.
As such, it is available as an old workaround that allows making Node
Group inputs that default to normal when not connected, by routing
via a no-op Bump node before doing math.
Cycles specifically recognizes this use case and either bypasses
the node, or converts it into a Geometry Normal node, but Eevee
was still evaluating it as usual. That incurred performance cost,
and also normalized the vector unlike Cycles.
This implements the same bypass logic for Eevee. Since I'm not
sure if it's possible to totally remove the node at this stage,
it emits a no-op function call to copy the input vector.
Differential Revision: https://developer.blender.org/D14045
Viewport cull bones during selection to avoid depth-picking
reading the depth buffer for bones that aren't in the viewport.
Files with thousands of bones could hang blender for seconds while
selecting. The issue could still happen with overlapping bones or when
zoomed out so all bones are under the cursor, however in practice this
rarely happens.
Now files with many bones select quickly.
Related changes include:
- Split `BKE_pchan_minmax` out of `BKE_pose_minmax`.
- Add `mat3_to_size_max_axis` to return the length of the largest
axis (used for scaling the radius).
Reviewed By: sybren
Maniphest Tasks: T91253
Ref D13990
This new info simplifies greatly the handling of resync and deleting
liboverride hierarchies, and makes those operations more robust to
complex dependencies cases between different hierarchies.
Related to T95283.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
This change will make handling of liboverrides hierarchies (especially
resyncing) much easier and efficient. It should also make it more
resilient to 'degenerate' cases, and allow proper support of things like
parenting an override to another override of the same linked data (e.g.
a override character parented to another override of the same
character).
NOTE: this commit only implements minimal changes to add that data and
generate it for existing files on load. Actual refactor of resync code
to take advantage of this new info will happen separately.
Previously, node selection made no distinction between a frame node and
other nodes. So a frame node would be selected by their whole rect or
center (depending on box/lasso/circle select). As a consequence of this,
box and lasso could not pratically be started inside a frame node (with
the intention to select a subset of contained child nodes) because the
frame would be selected immediately and tweak-transforming started.
Circle selecting would always contain the frame node as well (making
transforming a subset of nodes without also transforming the whole frame
impossible).
Now change selection behavior so that for all selection modes only the
border [the margin area that is automatically added around all nodes,
see note below] of a frame node is considered in selection. This makes
for a much more intuitive experience when arranging nodes inside frames.
note: to make the area of interest for selection/moving more obvious,
the cursor changes when hovering over (as is done for resizing).
note: this also makes the resize margin consistent with other nodes.
note: this also fixes right resize border (was exclusive instead of
inclusive as every other border)
Also fixes T46540.
This adds an option to the "Select Similar" operator in edit mode to
select vertices based on vertex crease similarity. The implementation
follows that of the edge crease, with a 1-dimensional KD-tree used to
store and retrieve vertex indices base on crease values.
To maintain compatibility with old files (scripts), the `SIMEDGE_CREASE`
enumeration identifier remains `CREASE`, while the one for the new
`SIMVERT_CREASE` is `VCREASE` to follow the naming convention of other
enum values.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D14037
This Diff changes the computation of the input and output socket
position to being always aligned with its corresponding label.
Reviewed By: campbellbarton
Ref D14025
Regression in 51befa4108
caused negative values to overflow into a uint64_t.
Resolve by casting to a signed int from originally signed types.
This caused D14033 not to work properly.
