Moves the Text Editor 'Resolve Conflict' button closer to data-block selector and with 'Question' icon.
Differential Revision: https://developer.blender.org/D9266
Reviewed by Hans Goudey
ASAN reported a use after free in after rB15d78ea85b602c. This commit
removed a reassignment of the `data` variable here that was actually
required because it may have been freed earlier in the function. This
sort of error would be avoided if the same variable wasn't reused for
different purposes.
The new option to filter the layers used by the Fill tool was not using the boundary strokes. The problem was the layers were skipped and any boundary stroke was not used.
Now, the layer is not skipped, but the strokes that are not boundary are skipped.
wiki.blender.org/wiki/Tools/Git#Tips has been updated.
A follow up to
lists.blender.org/pipermail/bf-committers/2020-October/050698.html
will be sent after commit.
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D9234
The logic of `BKE_sculpt_update_object_for_edit` was not correct. such
low-level functions should typically never preform depsgraph evaluation
themselves, they should be able to rely on getting a fully evaluated
depsgraph and just get needed data from there.
Supporting that required fixing other broken code higher in the
callstack, namely:
* `ED_object_sculptmode_enter_ex` was freeing evaluated data, for no
valid reason it would seem.
* `sculpt_undosys_step_decode` was ensuring an evaluated depsgraph
**before** calling `ED_object_mode_generic_exit`, which would
invalidate a lot of evaluated data.
Note that it is fairly difficult to track down all code paths leading to
`BKE_sculpt_update_object_for_edit`, so there may be still cases where
this gets called with improperly evaluated depsgraph.
Reviewed By: sergey
Maniphest Tasks: T81854
Differential Revision: https://developer.blender.org/D9270
When selecting multiple layers, the redo operator might not correctly
update the pose data. To make sure it is in a good state we have to
ensure that the pose data is good.
Reviewed By: Bastien
Differential Revision: http://developer.blender.org/D9354
The simple subdivision as a type only causes issues like no-continuous
normals across edges, inability to reliably switch the type and things
like this.
The new subdivision operators supports wider variety of how to add
details to the model, which are more powerful than a single one-time
decision on the subdivision type.
The versioning code is adjusting topology converter to specify all
edges as infinitely sharp. The reason for this (instead of using
settings.is_simple) is because in a longer term the simple subdivision
will be removed from Subsurf modifier as well, and will be replaced
with more efficient bmesh-based modifier.
This is finished up version of D8436.
Differential Revision: https://developer.blender.org/D9350
Sub-systems that use directories from BKE_appdir needed to be
initialized after parsing '--env-system-datafiles'.
This meant the animation player needed to call IMB_init it's self.
Avoid this complication by having a pass that can be used to setup
the environment before Blender's resources are accessed.
This reverts the workaround from 9ea345d1cf
Improved user experience by using viewport focal length
to calculate the new camera distance.
Also resizing the border to the same aspect ratio as
the window will help not zooming in more than expected.
Ref D9341
This encapsulates Node socket members behind a set of specific methods;
as such it is no longer possible to directly access Node class members
from exporters and parts of Cycles.
The methods are defined via the NODE_SOCKET_API macros in `graph/
node.h`, and are for getting or setting a specific socket's value, as
well as querying or modifying the state of its update flag.
The setters will check whether the value has changed and tag the socket
as modified appropriately. This will let us know how a Node has changed
and what to update, which is the first concrete step toward a more
granular scene update system.
Since the setters will tag the Node sockets as modified when passed
different data, this patch also removes the various `modified` methods
on Nodes in favor of `Node::is_modified` which checks the sockets'
update flags status.
Reviewed By: brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D8544
This studio light preset is designed for color painting tasks. As color
are multiplied on top of the current studio light/matcap, this should be
as white as possible and with very soft speculars to avoid color
distorsion while showing the volume of the mesh.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D8209
For Customdata layer copying, interpolation with the mixfactor is only
done for certain mix modes, now set the UI inactive if the mixfactor is
not in use.
Namely, the modes are the "Above / Below Threshold" which are only used
for flags, colors and normals and mixing is not supported in these cases.
Spotted while looking into T81914.
Differential Revision: https://developer.blender.org/D9327
Draw the handles for the active keyframe only when the interpolation type
is set to Bézier. This now matches the behaviour of handles of regular
(non-active) keyframes.
Activate an FCurve only on selecting, and not on deselecting a keyframe
or a handle.
Reviewed By: HooglyBoogly, Severin, looch, #animation_rigging
Differential Revision: https://developer.blender.org/D9328
Code was assuming frustrum planes are symmetrical which is not the case
for shifting. This lead to a shrinking region if shift was negative (and
a growing region if shift was positive)
So instead of only keeping track of plane on one side (and mirroring
over in code) get the actual planes after shifting and use these
instead.
This code corrects this for ortho and perspective cameras, it does not
touch panoramic cameras.
Reviewed By: brecht
Maniphest Tasks: T69911
Differential Revision: https://developer.blender.org/D9342
This patch improves the single core performance of the lattice deform.
1. Prefetching deform vert during initialization. This data is constant for
each innerloop. This reduces the complexity of the inner loop what makes
more CPU resources free for other optimizations.
2. Prefetching the Lattice instance. It was constant. Although performance
wise this isn't noticeable it is always good to free some space in the
branch prediction tables.
3. Remove branching in all loops by not exiting when the effect of the loop
isn't there. The checks in the inner loops detected if this loop didn't
have any effect on the final result and then continue to the next loop.
This made the branch prediction unpredictable and a lot of mis
predictions were done. For smaller inner loops it is always better
to remove unpredictable if statements by using branchless code patterns.
4. Use SSE2 instruction when available.
This gives 50% performance increase measured on a
Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz with GCC 9.3.
Also check other compilers.
Before:
```
performance_no_dvert_10000 (4 ms)
performance_no_dvert_100000 (30 ms)
performance_no_dvert_1000000 (268 ms)
performance_no_dvert_10000000 (2637 ms)
```
After:
```
performance_no_dvert_10000 (3 ms)
performance_no_dvert_100000 (21 ms)
performance_no_dvert_1000000 (180 ms)
performance_no_dvert_10000000 (1756 ms)
```
Reviewed By: Campbell Barton
Differential Revision: https://developer.blender.org/D9087
