These icons are extremely order dependent and set dynamically in a
four-way option at:
`rna_object_type_visibility_icon_get_common`
Problem introduced on: 60cc73afe6, when I sorted the non-toggle icons
alphabetically.
Bug reported by Pablo Vazquez in real life.
This PR implements the "Smooth" operator in Weight Paint mode for GPv3.
The Smooth operator smooths the weights in the active vertex group by
applying a gaussian blur to the vertex weights.
The operator has two properties:
- `factor` (0.0 - 1.0): The extent to which the smoothed weight is
applied to the original weight, where 0.0 is 'keep the original weight'
and 1.0 is 'replace fully with the smoothed weight'.
- `repeat`: The number of times the smoothing is executed. A higher
value means more smoothing.
The operator is added to the 'Weight' menu in Weight Paint mode.
Pull Request: https://projects.blender.org/blender/blender/pulls/126429
`frame_at()` returns previous keyframe of which the drawing is visible
at current framec. When previous keyframe is selected, all the intermediate frames
till iteration reach the next keyframe are also exported.
To fix this, look inside `frames()` map instead of `frame_at()`.
Pull Request: https://projects.blender.org/blender/blender/pulls/126779
Each time the face bounds are used after they're initially computed, we
recompute the center of the bounds. We only use the actual bounds to
calculate the bounds of each node to decide how it should be split.
This commit changes to store the bounds centers instead, and just use
the full bounds as a type for the parallel reduction.
In a test with a 16 million face grid on a Ryzen 7840U, I observed a
1.28x decrease in BVH build time, from 1072 to 836 ms.
I didn't apply a similar change to multires grids BVH building because
it's not clear the same bottleneck exists due to the lower ratio of
"primitives" (grids) to final subdivided vertices.
The "simplify" comment copied many times shows that these
aren't helpful-- they waste space and give the wrong impression
about the purpose of code comments.
When I first developed the attribute filters they were just a `FunctionRef`
and thus could be stored by value in this struct. Now that they are a
virtual type, that is not possible anymore.
This commit opts to align the behavior with `vert_neighbors_get_mesh`
which also clears the provided vector instead of leaving it up to the
caller to do so.
Pull Request: https://projects.blender.org/blender/blender/pulls/127273
Raycast and "nearest to ray" use the local vertex indices from triangles
to index original data, which needs to be sized with all the vertices, not
just unique vertices. Add a new function to access that data.
Mouse cursor changes when hovering at the top of popup blocks to
indicate that these can be dragged. On Mac this looks like a hand,
while for other platforms it is a drag cursor.
Pull Request: https://projects.blender.org/blender/blender/pulls/118358
Add multiple "hand" mouse cursors. These are mostly needed for Mac,
which needs open, close, and pointing hand cursors. This also adds
similar for Windows, but just for completeness and testing.
Pull Request: https://projects.blender.org/blender/blender/pulls/127164
Enable deferred parallel batch compilation for image renders.
This replaces the use of the `WM_job` system with a regular thread,
since `WM_job` requires access to the main context,
which is not accessible from the render thread.
It also simplifies the system so it creates a single thread at startup
and deletes it at exit.
Pull Request: https://projects.blender.org/blender/blender/pulls/125005
The code that decides the indentation for channel groups and fcurve channels
already accounted for the difference between the Action Editor and Dopesheet/
Graph Editor, since the level of nesting is different in the Action Editor vs
the other two. However, it didn't account for the difference between legacy and
layered actions, which have different nesting in the Action Editor.
Additionally, before layered actions were introduced it was impossible for
the Action Editor to display channels from e.g. materials, but those channels
can now be displayed in the Action Editor via the slot system. However, the
indentation code was structured such that material (etc.) channels were *always*
indented as if they were in the Dopesheet/Graph Editor, where they're always
nested under the IDs that use them.
This commit fixes the issue by having a separate code path for indenting in the
Action Editor that only indents channel groups and fcurve channels, and which
properly handles the difference between layered and legacy actions.
Pull Request: https://projects.blender.org/blender/blender/pulls/127202
When converting a legacy Action to a layered Action,
also convert group memberships.
This is important for bones to retain their structure in
the Channel Box.
Pull Request: https://projects.blender.org/blender/blender/pulls/127188
This adds layered animation support to the following operators, allowing users to manage the grouping and arrangement of fcurves in the channel list:
- "Group Channels"
- "Ungroup Channels"
- "Move Channels"
Pull Request: https://projects.blender.org/blender/blender/pulls/127080
The cause was simple: I missed this operator in the initial layered-action
channel group implementation, so deletion was using the legacy action code
even for layered actions.
This implements the needed code in the deletion operator to handle layered
actions.
Pull Request: https://projects.blender.org/blender/blender/pulls/127242
Renderdoc only export extensions it supports.
`VK_EXT_dynamic_rendering_unused_attachments` is not supported by
renderdoc and therefor no devices could be found to start the vulkan
backend.
In GHOST we already work around this issue by not checking this specific
extension. We should do the same in VKBackend.
Pull Request: https://projects.blender.org/blender/blender/pulls/127236
The `Action.groups` RNA functions now work with layered Actions as well.
They just expose / operate on the groups of the channelbag that belongs
to the first slot of the Action.
Pull Request: https://projects.blender.org/blender/blender/pulls/127241
Protect the backward-compatible API implementation with
`#ifdef WITH_ANIM_BAKLAVA` directives.
This also moves the `use_backward_compatible_api()` function further up
in the file, to the place where I'll need it when building the backward-
compatible API implementation for Action groups.
The backward-compatible API implementation makes the legacy Action API also
work on new layered Actions, exposing the data for the first slot.
Pull Request: https://projects.blender.org/blender/blender/pulls/127241
Add group name support to the backward-compatible implementation of
`Action.fcurves.new()`. This ensures that the legacy Action API creates
a new-style channel group in the appropriate channel bag.
Pull Request: https://projects.blender.org/blender/blender/pulls/127241
No functional changes.
The comments in the file are used as categories by some of our ICON
reading tools.
This also groups the TOGGLES icons together, with comments about their
order. This only includes the icons actively used as toggles at the
moment.
Note that ICON_NONE has always to be the first one in this file since
some parts of the code (e.g., the code to turn RECORD_ON into colored,
and the code for the popover chevron) have no-icon hardcoded as 0.
Ref: !127197
This error was introduced on 7dc3e8e04d
by the automatic script used (after my original PR code - !127194).
The SVG had the same attributes added twice.
The issue was technically introduced on
ffa802da7ac09273a34903438550e0966c4063dc (which is not in main but part
of the code which was merged).
The device code was disabled for primitives with deformation blur
and the intersection function always returned false, hence no
rendered primitive.
Other than that, there were a few bugs on both device and host codes
(e.g., the order of current and previous times and the primitive name.)
Pull Request: https://projects.blender.org/blender/blender/pulls/127163
Subtexture reading is supported via GPUFramebuffer. The input
parameters was an rect, but is called an area which includes
width and height.
Due to inconsistent naming the area was assumed to be a region leading
to incorrect sub texture being downloaded or crashes due to out of
bound writes.
This fix crashes when selecting in edit mode.
Pull Request: https://projects.blender.org/blender/blender/pulls/127229
Changes:
- Use macros to reduce Cocoa event forwarding boilerplate
- Use @autoreleasepool where necessary
- Use idiomatic Objective-C properties for `COCOA_VIEW_CLASS`
Style Changes:
- Use C-Style Comments
- Use braces for conditional statements
- Use Objective-C dot-notation
Ref #126772
Pull Request: https://projects.blender.org/blender/blender/pulls/126769
Explain in a comment why the RNA property `AnimData.action_slot_handle` is
still necessary (TL;DR: library overrides), even though its use in Python
code is limited / should be avoided.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/127185
Remove `Action.last_slot_handle` from RNA. This is considered to be an
internal implementation detail, and Python code should not be using its
value for anything.
No actual functional changes, as this RNA property isn't used anywhere.
Pull Request: https://projects.blender.org/blender/blender/pulls/127185
