When deleting all the segments the active index is generally 0. Adding a
new segment increments the active index, which pushes it out of range.
The code should not expect active index to be inside the current range.
Pull Request: https://projects.blender.org/blender/blender/pulls/118143
This adds a new `ModifierData.persistent_uid` integer property with the following properties:
* It's unique within the object.
* Match between the original and evaluated object.
* Stable across Blender sessions.
* Stable across renames and reorderings of modifiers.
Potential use-cases:
* Everywhere where we currently use the name as identifier. For example,
`ModifierComputeContext` and `ModifierViewerPathElem`.
* Can be used as part of a key in `IDCacheKey` to support caches that stay
in-tact across undo steps.
* Can be stored in the `SpaceNode` to identify the modifier whose geometry node
tree is currently pinned (this could use the name currently, but that hasn't been
implemented yet).
This new identifier has some overlap with `ModifierData.session_uid`, but there
are some differences:
* `session_uid` is unique within the entire Blender session (except for duplicates
between the original and evaluated data blocks).
* `session_uid` is not stable across Blender sessions.
Especially due to the first difference, it's not immediately obvious that the new
`persistent_uid` can fulfill all use-cases of the existing `session_uid`. Nevertheless,
this seems likely and will be cleaned up separately.
Unfortunately, there is not a single place where modifiers are added to objects currently.
Therefore, there are quite a few places that need to ensure valid identifiers. I tried to catch
all the places, but it's hard to be sure. Therefore, I added an assert in `object_copy_data`
that checks if all identifiers are valid. This way, we should be notified relatively quickly if
issues are caused by invalid identifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/117347
With this patch, materials are kept intact in simulation zones and bake nodes
without any additional user action.
This implements the design proposed in #108410 to support referencing
data-blocks (only materials for now) in the baked data. The task also describes
why this is not a trivial issue. A previous attempt was implemented in #109703
but it didn't work well-enough.
The solution is to have an explicit `name (+ library name) -> data-block`
mapping that is stored in the modifier for each bake node and simulation zone.
The `library name` is necessary for it to be unique within a .blend file. Note
that this refers to the name of the `Library` data-block and not a file path.
The baked data only contains the names of the used data-blocks. When the baked
data is loaded, the correct material data-block is looked up from the mapping.
### Automatic Mapping Generation
The most tricky aspect of this approach is to make it feel mostly automatic.
From the user point-of-view, it should just work. Therefore, we don't want the
user to have to create the mapping manually in the majority of cases. Creating
the mapping automatically is difficult because the data-blocks that should
become part of the mapping are only known during depsgraph evaluation. So we
somehow have to gather the missing data blocks during evaluation and then write
the new mappings back to the original data.
While writing back to original data is something we do in some cases already,
the situation here is different, because we are actually creating new relations
between data-blocks. This also means that we'll have to do user-counting. Since
user counts in data-blocks are *not* atomic, we can't do that from multiple
threads at the same time. Also, under some circumstances, it may be necessary to
trigger depsgraph evaluation again after the write-back because it actually
affects the result.
To solve this, a small new API is added in `DEG_depsgraph_writeback_sync.hh`. It
allows gathering tasks which write back to original data in a synchronous way
which may also require a reevaluation.
### Accessing the Mapping
A new `BakeDataBlockMap` is passed to geometry nodes evaluation by the modifier.
This map allows getting the `ID` pointer that should be used for a specific
data-block name that is stored in baked data. It's also used to gather all the
missing data mappings during evaluation.
### Weak ID References
The baked/cached geometries may have references to other data-blocks (currently
only materials, but in the future also e.g. instanced objects/collections).
However, the pointers of these data-blocks are not stable over time. That is
especially true when storing/loading the data from disk, but also just when
playing back the animation. Therefore, the used data-blocks have to referenced
in a different way at run-time.
This is solved by adding `std::unique_ptr<bake::BakeMaterialsList>` to the
run-time data of various geometry data-blocks. If the data-block is cached over
a longer period of time (such that material pointers can't be used directly), it
stores the material name (+ library name) used by each material slot. When the
geometry is used again, the material pointers are restored using these weak name
references and the `BakeDataBlockMap`.
### Manual Mapping Management
There is a new `Data-Blocks` panel in the bake settings in the node editor
sidebar that allows inspecting and modifying the data-blocks that are used when
baking. The user can change what data-block a specific name is mapped to.
Pull Request: https://projects.blender.org/blender/blender/pulls/117043
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Each value is now out of the global namespace, so they can be shorter
and easier to read. Most of this commit just adds the necessary casting
and namespace specification. `enum class` can be forward declared since
it has a specified size. We will make use of that in the next commit.
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Move the contents of `ANIM_bone_collections.h` into its C++
`ANIM_bone_collections.hh` sibling. Blender is C++ by now that we can do
without the C header.
No functional changes.
Move object runtime data to a separate header and allocate it separately
as `blender::bke::ObjectRuntime`. This is how node, mesh, curves, and
point cloud runtime data is stored.
Benefits:
- Allow using C++ types in object runtime data
- Reduce space required for Object struct in files
- Increase conceptual separation between DNA and runtime data
- Remove the need to add manual padding in runtime data
- Include runtime struct definition only in files that require it
Pull Request: https://projects.blender.org/blender/blender/pulls/113957
Move the three current 'status variables' (stop, update and progress)
into a single 'WorkerStatus' struct. This is cleaner and will allow for
future workin this area without having to edit tens of 'startjob'
callbacks signatures all the time.
No functional change expected here.
Note: jobs' specific internal code has been modified as little as
possible, in many cases the job's own data still just store pointers to
these three values. Ideally in the future more refactor will be using a
single pointer to the shared `wmJobWorkerStatus` data instead.
Pull Request: https://projects.blender.org/blender/blender/pulls/113343
When duplicating the node group from the geometry node editor, show the
data-block selector in the modifier interface. Otherwise it's not clear
that the modifier is using a local data-block, not the original asset.
- Multiple issues in the Data Transfer modifier error messages:
- "None" -> "none", this word in the middle of a sentence, no need
for upper case.
- "amount of <element>" -> "number", more appropriate for discrete
counts.
- "doesn't" -> "does not", to respect Blender's style guide.
- "The grease pencil object need an Armature modifier" -> "needs",
grammar.
- "Armature modifier is not valid or wrong defined" -> "is invalid".
Unclear what "wrong defined" means.
- The "Recent Reports" text block has not been used since 2.81.
- "Not valid subdivisions found to rebuild lower levels" -> "No
valid...", typo.
- "extensions repository" -> "extension repository": typo.
- "... , but loose correct blending..." -> "lose": typo.
- "True when multiple enums ": trailing whitespace.
- "Number of ray per pixel" -> "rays": typo.
- "Curve Parameter node" -> "Spline ...": this is the actual name of
the node after its rename in 1cd9fcd98d.
Pull Request: https://projects.blender.org/blender/blender/pulls/111145
Armature layers (the 32 little dots) and bone groups are replaced with
Bone Collections:
- Bone collections are stored on the armature, and have a name that is
unique within that armature.
- An armature can have an arbitrary number of bone collections (instead
of the fixed 32 layers).
- Bones can be assigned to zero or more bone collections.
- Bone collections have a visibility setting, just like objects in scene
collections.
- When a bone is in at least one collection, and all its collections in
are hidden, the bone is hidden. In other cases (in any visible
collection, or in no collection at all), the bone visibility is
determined by its own 'hidden' flag.
- For now, bone collections cannot be nested; they are a flat list just
like bone groups were. Nestability of bone collections is intended to
be implemented in a later 4.x release.
- Since bone collections are defined on the armature, they can be used
from both pose mode and edit mode.
Versioning converts bone groups and armature layers to new bone
collections. Layers that do not contain any bones are skipped. The old
data structures remain in DNA and are unaltered, for limited forward
compatibility. That way at least a save with Blender 4.0 will not
immediately erase the bone group and armature layers and their bone
assignments.
Shortcuts:
- M/Shift+M in pose/edit mode: move to collection (M) and add to
collection (shift+M). This works similar to the M/Shift+M menus for
objects & scene collections.
- Ctrl+G in pose mode shows a port of the old 'bone groups' menu. This
is likely to be removed in the near future, as the functionality
overlaps with the M/Shift+M menus.
This is the first commit of a series; the bone collections feature will
be improved before the Blender 4.0 release. See #108941 for more info.
Pull request: https://projects.blender.org/blender/blender/pulls/109976
With the end goal of simplifying ownership and memory management,
and allowing the use of `get_name` in contexts without statically
allocated strings, use `std::string` for the return values of these two
operator type callbacks instead of `const char *` and `char *`.
In the meantime things get uglier in some places. I'd expect `std::string`
to be used more in the future elsewhere in Blender though.
Pull Request: https://projects.blender.org/blender/blender/pulls/110823
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Remove the "_for_read" suffix from methods to get geometry and geometry
components. That should be considered the default, so the suffix just
adds unnecessary text. This is consistent with the attribute API and
various implicit sharing data access methods.
Use "from_mesh" instead of "create_with_mesh". This is consistent with
the recently used naming for the `IndexMask` API.
Pull Request: https://projects.blender.org/blender/blender/pulls/110738
Add an API for armature layer access. Instead of accessing `arm->layer`
and friends directly, the code now uses this API. This will make things
easier to replace by bone collections in the future.
The functions are named "bonecoll" (short for "bone collection"), as
that's the soon-to-be-introduced replacement for armature layers. This
API is the first step towards that replacement, and should help to
reduce the changes necessary when functional changes are committed.
This also creates a new module `source/blender/animrig` for Animation &
Rigging code. This will, for example, house the bone collection system
in the near future.
There is a bunch of code currently spread across blenkernel and editors
in a rather ad-hoc way; it is intended that at some point that code gets
moved into `animrig` as well (or at least the subset of that code where
such a move makes sense; brain still required).
Ref: #108941
No functional changes.
