We had a short discussion on this change. "Grease Pencil Layer" is
just a bit too long, especially in the UI. Even though "Layer" might be
ambiguous, it shouldn't be in the context of geometry nodes. There are
currently no other "Layers" and if there were, using the same domain
name could be fine (just like we reuse the point domain for e.g. vertices
in meshes and control points in curves).
This also renames the internal enum to `ATTR_DOMAIN_LAYER`
Pull Request: https://projects.blender.org/blender/blender/pulls/113589
This implements the core changes for this design: https://devtalk.blender.org/t/grease-pencil-integration-into-geometry-nodes/31220
The changes include:
* Add `CustomData` for layer attributes
* Add attribute support for the `GreasePencilComponent` to read/write layer attributes. Also introduces a `Layer` domain.
* Implement a `GreasePencilLayerFieldContext` and make `GeometryFieldContext` work with grease pencil layers.
* Implement `Set Position` node for `Grease Pencil`.
Note: These changes are only accessible/visible with the `Grease Pencil 3.0` experimental flag enabled.
Co-authored-by: Jacques Lucke <jacques@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/112535
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
The `lib_link` callback cannot always be fully replaced/removed, as in
some case it is also doing some validation checks, or data editing based
on the result of lib_linking internal ID pointers.
The callback has been renamed for that purpose, from `read_lib` to
`read_after_liblink`. It is now called after all ID pointers have been
fully lib-linked for the current ID, but still before the call to
`do_versions_after_linking`.
This change should not have any behavioral effect. Although in theory
the side-effect of this commit (to split lib linking itself, and the
validation/further processing code) into two completely separated steps
could have some effects, in practice none are expected, and tests did
not show any changes in behavior either..
Part of implementing #105134: Removal of readfile's lib_link & expand code.
Include counts of some headers while making full blender build:
- BLI_color.hh 1771 -> 1718
- BLI_math_color.h 1828 -> 1783
- BLI_math_vector.hh 496 -> 405
- BLI_index_mask.hh 1341 -> 1267
- BLI_task.hh 958 -> 903
- BLI_generic_virtual_array.hh 509 -> 435
- IMB_colormanagement.h 437 -> 130
- GPU_texture.h 806 -> 780
- FN_multi_function.hh 331 -> 257
Note: DNA_node_tree_interface_types.h needs color include only
for the currently unused (but soon to be used) socket_color function.
Future step is to figure out how to include
DNA_node_tree_interface_types.h less.
Pull Request: #111113
Including <iostream> or similar headers is quite expensive, since it
also pulls in things like <locale> and so on. In many BLI headers,
iostreams are only used to implement some sort of "debug print",
or an operator<< for ostream.
Change some of the commonly used places to instead include <iosfwd>,
which is the standard way of forward-declaring iostreams related
classes, and move the actual debug-print / operator<< implementations
into .cc files.
This is not done for templated classes though (it would be possible
to provide explicit operator<< instantiations somewhere in the
source file, but that would lead to hard-to-figure-out linker error
whenever someone would add a different template type). There, where
possible, I changed from full <iostream> include to only the needed
<ostream> part.
For Span<T>, I just removed print_as_lines since it's not used by
anything. It could be moved into a .cc file using a similar approach
as above if needed.
Doing full blender build changes include counts this way:
- <iostream> 1986 -> 978
- <sstream> 2880 -> 925
It does not affect the total build time much though, mostly because
towards the end of it there's just several CPU cores finishing
compiling OpenVDB related source files.
Pull Request: https://projects.blender.org/blender/blender/pulls/111046
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Remove the "_for_read" suffix from methods to get geometry and geometry
components. That should be considered the default, so the suffix just
adds unnecessary text. This is consistent with the attribute API and
various implicit sharing data access methods.
Use "from_mesh" instead of "create_with_mesh". This is consistent with
the recently used naming for the `IndexMask` API.
Pull Request: https://projects.blender.org/blender/blender/pulls/110738
The `on_activate()` function is expected to do undo pushes, call
operators, send notifiers and things like that as needed. Context is
necessary for such things, so seems reasonable to provide it as
argument.
Also needed for #110378.
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
Also see #103343.
There was one unusual complication due to `openvdb` here. The `BKE_volume.h`
header included `openvdb` but that would not link correctly in rna code. I'm not entirely
sure why any of the openvdb code is actually instantiated, may be an issue in the
`openvdb` headers. The solution is to create a new header that gives access to the
underlying `openvdb` data structure for a `Volume` geometry. This header can't be
included in rna for now, until the linking issues are resolved.
Pull Request: https://projects.blender.org/blender/blender/pulls/109508
Similar to curves, the ".selection" attribute is used to store selection.
Selection isn't visualized in the viewport yet, but this should be added
at some point anywya. See f89b32382a.
Move `GeometrySet` and `GeometryComponent` and subclasses
to the `blender::bke` namespace. This wasn't done earlier since
these were one of the first C++ classes used throughout Blender,
but now it is common.
Also remove the now-unnecessary C-header, since all users of
the geometry set header are now in C++.
Pull Request: https://projects.blender.org/blender/blender/pulls/109020
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
The issue was that `is_rendering` was used as a proxy to check
whether the interface is locked. Locking the node editor during rendering
is not necessary, but it currently is necessary while baking, because
baking changes original data from a different thread.
The solution is to use the already existing mechanism to tell Blender
which regions should be locked when the interface is locked.
Goals of this refactor:
* Reduce memory consumption of `IndexMask`. The old `IndexMask` uses an
`int64_t` for each index which is more than necessary in pretty much all
practical cases currently. Using `int32_t` might still become limiting
in the future in case we use this to index e.g. byte buffers larger than
a few gigabytes. We also don't want to template `IndexMask`, because
that would cause a split in the "ecosystem", or everything would have to
be implemented twice or templated.
* Allow for more multi-threading. The old `IndexMask` contains a single
array. This is generally good but has the problem that it is hard to fill
from multiple-threads when the final size is not known from the beginning.
This is commonly the case when e.g. converting an array of bool to an
index mask. Currently, this kind of code only runs on a single thread.
* Allow for efficient set operations like join, intersect and difference.
It should be possible to multi-thread those operations.
* It should be possible to iterate over an `IndexMask` very efficiently.
The most important part of that is to avoid all memory access when iterating
over continuous ranges. For some core nodes (e.g. math nodes), we generate
optimized code for the cases of irregular index masks and simple index ranges.
To achieve these goals, a few compromises had to made:
* Slicing of the mask (at specific indices) and random element access is
`O(log #indices)` now, but with a low constant factor. It should be possible
to split a mask into n approximately equally sized parts in `O(n)` though,
making the time per split `O(1)`.
* Using range-based for loops does not work well when iterating over a nested
data structure like the new `IndexMask`. Therefor, `foreach_*` functions with
callbacks have to be used. To avoid extra code complexity at the call site,
the `foreach_*` methods support multi-threading out of the box.
The new data structure splits an `IndexMask` into an arbitrary number of ordered
`IndexMaskSegment`. Each segment can contain at most `2^14 = 16384` indices. The
indices within a segment are stored as `int16_t`. Each segment has an additional
`int64_t` offset which allows storing arbitrary `int64_t` indices. This approach
has the main benefits that segments can be processed/constructed individually on
multiple threads without a serial bottleneck. Also it reduces the memory
requirements significantly.
For more details see comments in `BLI_index_mask.hh`.
I did a few tests to verify that the data structure generally improves
performance and does not cause regressions:
* Our field evaluation benchmarks take about as much as before. This is to be
expected because we already made sure that e.g. add node evaluation is
vectorized. The important thing here is to check that changes to the way we
iterate over the indices still allows for auto-vectorization.
* Memory usage by a mask is about 1/4 of what it was before in the average case.
That's mainly caused by the switch from `int64_t` to `int16_t` for indices.
In the worst case, the memory requirements can be larger when there are many
indices that are very far away. However, when they are far away from each other,
that indicates that there aren't many indices in total. In common cases, memory
usage can be way lower than 1/4 of before, because sub-ranges use static memory.
* For some more specific numbers I benchmarked `IndexMask::from_bools` in
`index_mask_from_selection` on 10.000.000 elements at various probabilities for
`true` at every index:
```
Probability Old New
0 4.6 ms 0.8 ms
0.001 5.1 ms 1.3 ms
0.2 8.4 ms 1.8 ms
0.5 15.3 ms 3.0 ms
0.8 20.1 ms 3.0 ms
0.999 25.1 ms 1.7 ms
1 13.5 ms 1.1 ms
```
Pull Request: https://projects.blender.org/blender/blender/pulls/104629
The usage of the lib pointer was cryptic to say the least, it was
essentialy used to allow or not local IDs results in the mapping
old_id_pointer -> new_id_pointer lookup result.
Now:
- Explicitely pass a boolean to allow or not local ID as result in
lower-level code.
- Pass the 'self ID' pointer instead of its library to the whole
liblinking code (that was already the case in a few places).
Note that naming of the 'self id' pointer is currently very inconsistent
throughout the readfile liblink code, this will have to be cleaned up in
a separate step later. For now, `self_id` has been chosen for new code
as it matches the terminology in lib_query code.
The later change can also allow finer handling of lookup on undo, based
on how it was re-read (or not), should the need for this arise.
