Use the new `action.fcurve_ensure_for_datablock()` function to ensure
the opacity F-Curve exists.
This function also ensures that the Action itself is ready for keying
(it has a layer and a keyframe strip), and ensures the slot for the
Scene exists and is assigned.
Co-authored-by: Pratik Borhade <pratikborhade302@gmail.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/134753
With the brush assets project, brushes were moved from being local to
the working blendfile to being linked from asset libraries. This breaks
the Image Paint 'Clone' brush, as it has a brush property that links to
other Image datablocks.
To support this functionality, this commit adds the corresponding
properties into the `ImagePaintSettings` struct so that it is stored
locally with the images that will be used by the tool, inside the main
blendfile.
The source image property is shared with the 3D version of the 'Clone'
brush instead of adding a separate field to preserve old behavior.
Notably, this has the following limitations:
* If clone brush assets have been made and shared with external packs,
they would not work out of the box with linked image assets.
* Despite these settings being stored on the scene, they are populated
inside the tool window under "Brush Settings" which is potentially
misleading. However, this is already the case for the 3D version of
the brush, so further UI refinement will happen outside of this PR.
* Users will be unable to use separate images simultaneously for the
Image editor and the 3D viewport, unlike in pre-4.3 versions. This
can be adjusted in the future if it is a critical workflow.
Because the intended design and functionality of this tool is currently
questionable, this commit opts to make these changes instead of doing
further design to support both accessing data on the brush and on the
scene.
Pull Request: https://projects.blender.org/blender/blender/pulls/134474
Move the mask_random function to BLI_index_mask.hh, so it can be shared between curves, grease pencil and point cloud.
Copied/inspired by the curves select code.
Pull Request: https://projects.blender.org/blender/blender/pulls/134624
Though "Point Cloud" written as two words is technically correct and should be used in the UI, as one word it's typically easier to write and parse when reading. We had a mix of both before this patch, so better to unify this as well.
This commit also renames the editor/intern/ files to remove pointcloud_ prefix.
point_cloud was only preserved on the user facing strings:
* is_type_point_cloud
* use_new_point_cloud_type
Pull Request: https://projects.blender.org/blender/blender/pulls/134803
This adds:
- support for snapping for the pointcloud object (selection to cursor/
grid, cursor to selection)
- as usual, "Warp" an "Randomize" operators come along "for free" with
this
Pull Request: https://projects.blender.org/blender/blender/pulls/134799
Conversion was only possible if the active object was editable &
selected, this complicated overriding the operator from Python
since it wasn't enough to override the selection & active-object.
Now it's possible to use bpy.ops.object.convert() from Python
overriding the selected_editable_objects only.
For users the difference isn't so significant:
- Having an active object is no longer required.
- It's possible there are no objects to operate on,
as previously the active object was used to check at least one
object could be converted, although this check wasn't fool-proof
as it didn't check the objects data-type.
Resolves#100664.
Ref !134728.
This reverts 06a2617107.
Commit has introduced few errors from user perspective (#134277) and
python side (#134380). Best to revert it now then handle the bug fixes later.
The error in #134380 was due to `context.layer_collection` and
`active_layer_collection` returning excluded collection.
Pull Request: https://projects.blender.org/blender/blender/pulls/134546
Note: The point cloud bounding box is not being updated once the points are deleted.
This is a known issue with BKE_pointcloud_nomain_to_pointcloud and Hans is looking into it.
Code inspired/built based on the Delete Geometry node.
Pull Request: https://projects.blender.org/blender/blender/pulls/134622
This ends up being very simple because point cloud has
no connectivity information and each element is just one
position.
Also implement the 3D transform gizmo.
The geometry deformation system isn't implemented in this
commit. That can be tacked later.
Select All operator and boiler plate for future point cloud operators.
The selection code is basically copied/inspired by the curves selection
code. A lot of it could probably be moved to shared attribute selection
functions.
Note, while this patch is working well, there are some caveats
to test it:
* Shortcuts are being defined (you can see them in the Preferences). Yet
they are not working for whatever reason.
* There is no way to visualize the selection. I've been testing it by
using a Nodes tool that changes the material based on selection.
Pull Request: https://projects.blender.org/blender/blender/pulls/134450
Adds a new python operator to Grease Pencil for adding the layer
above or below as a masking layers to the active layer.
Creates a new file for Grease Pencil python operators in
`scripts/startup/bl_operators/grease_pencil.py`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134401
<img width="298" alt="image.png" src="attachments/9336d17d-7dd5-445b-892c-ad7e91bb98d6">
---
The Selection tools are not working, so I did not add them to the toolbar.
Pull Request: https://projects.blender.org/blender/blender/pulls/134453
The "Red Alert" color is currently hard-coded, which causes problems in
themes. It also has an Enum value of 0, which precludes using this
value as "unset". We also use Error, Warning, and Info colors that are
part of the Info Editor. This PR moves these out of the Info Editor
and into the "State" part of the theme. And then makes TH_REDALERT use
the TH_ERROR color.
Pull Request: https://projects.blender.org/blender/blender/pulls/131127
The Grease Pencil `Clipboard` only stored a single `CurvesGeometry`. This meant
that the `Paste by Layer` operation (from 4.2 LTS) couldn't be implemented.
This PR adds an `Array` of `ClipboardLayer`s to the `Clipboard`. Each layer stores
the name of the Grease Pencil layer that it was copied from and the `CurvesGeometry`.
The `grease_pencil.paste` operator has a new property `type` (`ACTIVE` or `LAYER`)
that decides how to paste the strokes.
Using the `ACTIVE` type, the strokes of all the `ClipboardLayer`s get merged and then
pasted to the active layer.
Using the `LAYER` type, we first try to find layers to paste the `ClipboardLayer`s into.
We just look for matching layer names. If no matching layer is found, the strokes are
pasted into the active layer instead.
This should be consistent with how Grease Pencil used to behave in 4.2. LTS.
Pull Request: https://projects.blender.org/blender/blender/pulls/134168
Note: this is a back-port from `main`, details below,
Original message:
Add support for dynamic NDOF orbit center calculation.
- When "Auto" NDOF preference is enabled:
All visible objects in the viewport are used to calculate a
bounding box center, if the bounds are outside the view or the center
is behind the viewport, use a Z-Buffer test to calculate the depth in
the middle of the region.
- When "Use Selected Items" NDOF preferences is enabled,
calculating the bounds from the selection.
- An option to show the orbit center as a guide has also been added.
Ref !129594
Co-authored-by: Kamil Galik <kgalik@3dconnexion.com>
Back-ported as this change as this only missed the 4.4 branch by hours
and is considered an important feature for 4.4 by 3dconnexion.
This includes the following commits from main:
1a14d6949830399fd1653a8658958fda8d9d989e2a0ce11104fb539baa89
Add support for dynamic NDOF orbit center calculation.
- When "Auto" NDOF preference is enabled:
All visible objects in the viewport are used to calculate a
bounding box center, if the bounds are outside the view or the center
is behind the viewport, use a Z-Buffer test to calculate the depth in
the middle of the region.
- When "Use Selected Items" NDOF preferences is enabled,
calculating the bounds from the selection.
- An option to show the orbit center as a guide has also been added.
Ref !129594
Co-authored-by: Kamil Galik <kgalik@3dconnexion.com>
Move cavity properties to a separate subpanel, instead of being
in-between unrelated settings.
Avoids issues with add-ons appending to the "Options" subpanel, which
would push cavity properties back to the middle.
Properties are now greyed out (instead of hidden) when unavailable
due to X-Ray being enabled.
More details and screenshots in pull request.
Pull Request: https://projects.blender.org/blender/blender/pulls/133944
This patch introduces the `Plane` brush, a generalization of the
existing `Flatten`, `Fill` and `Scrape` brushes, with the objective of
providing more flexibility when sculpting.
This brush has the following key features:
* `Height` and `Depth` parameters to control the range of the brush in
the local z-axis.
* Stabilizers for the normal and center of the brush plane.
When inverting, the user can choose between two options:
* `Invert Displacement`: Identical to the existing behavior, displacing
vertices away from the plane.
* `Swap Height and Depth`: Exchanges the roles of `Height` and `Depth`.
For example a brush with `Height` = 0.7 and `Depth` = 0.3 behaves as
if it had `Height` = 0.3 and `Depth` = 0.7. In particular, this
ensures that a scrape brush (`Height` = 1, `Depth` = 0) becomes
equivalent to a fill brush (`Height` = 0, `Depth` = 1) when inverted,
and viceversa.
In the existing planar brushes, the influence on a vertex is determined
by the 3D Euclidean distance between the vertex and the cursor position,
multiplied by the vertex's distance from the brush plane (and other
factors common to all brushes).
In the `Plane` brush, the 3D distance is between the vertex and the
plane center instead of the cursor position.
The Plane brush introduces two parameters — `Stabilize Normal` and
`Stabilize Plane`. These can be thought of as the non-binary version of
the `Original Normal` and `Original Plane` options found in existing
brushes. These values are a weighted moving average across a window of
previous stroke steps.
Pull Request: https://projects.blender.org/blender/blender/pulls/132723
Similar to how brush assets are created and managed this
PR allows to export pose assets into a different library.
Because of this there is a limitation to this where each
asset is stored in a separate blend file.
This may be lifted in the future as there are planned changes in
the design phase: #122061
### Create Asset
Now available in the 3D viewport in the "Pose" menu: "Create Pose Asset".
The button in the Dope Sheet will now call this new operator as well.
Clicking either of those will open a popup in which you can:
* Choose the name of the asset, which library and catalog it goes into.
* Clicking "Create" will create a pose asset on disk in the given library.
It is possible to create files into an outside library or add it in the current file.
The latter option does a lot less since it basically just creates the
action and tags it as an asset.
If no Asset Shelf **AND** no Asset Browser is visible anywhere in Blender,
the Asset Shelf will be shown on the 3D viewport from which
the operator was called.
### Adjust Pose Asset
Right clicking a pose asset that has been created in the way described
before will have options to overwrite it.
Only the active object will be considered for updating a pose asset
Available Options (the latter 3 under the "Modify Pose Asset" submenu):
* Adjust Pose Asset: From the selected bones, update ONLY channels that
are also present in the asset. This is the default.
* Replace: Will completely replace the data in the Pose Asset from
the current selection
* Add: Adds the current selection to the Pose Asset. Any already existing
channels have their values updated
* Remove: Remove selected bones from the pose asset
Currently this refreshes the thumbnail. In the case of custom
thumbnails it might not be something want
### Deleting an existing Pose Asset
Right click on a Pose Asset and hit "Delete Pose Asset". Works in the shelf
and in the asset library. Doing so will pop up a confirmation dialog,
if confirming, the asset is gone forever. Deleting a local asset is basically the
same as clearing the asset. This is a bit confusing because you get
two options that basically do the same thing sometimes,
but "Delete" works in other cases as well.
I currently don't see a way around that.
Part of design #131840
Pull Request: https://projects.blender.org/blender/blender/pulls/132747
This fixes an issue where the Canvas button is always disabled when
trying to use the experimental feature, Sculpt Texture Paint.
This bug was caused by the new Asset System since it changed how paint
tools work. Before, the UI would check the current tool being used and
determine if the Canvas button should be activated. With the new Asset
System, painting is done with modular brushes instead of tools, so
previous methods of checking tool properties have stopped working.
This is fixed by activating the Canvas button based on the properties
of the current brush. If the brush's type is either Paint or Smear,
then the Canvas button is activated.
Co-authored-by: T0MIS0N <50230774+T0MIS0N@users.noreply.github.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/133566
When developing and testing add-ons it can be useful to get to the
folder containing such add-on.
When Developer Extras is enabled, show a folder icon next to the
extension's path to quickly open it using the system file browser.
Also display it in the list of duplicate add-ons, if any, so user can
access them more conveniently.
Pull Request: https://projects.blender.org/blender/blender/pulls/128474
