Code used library reloading which would reload all data-blocks from a
data-block library. Since the essentials brushes are stored in a single
.blend file (one per mode), they would all be reset. In general this
violates the design where multiple brushes in a single .blend file
should be usable just fine. (A single file per brush is only necessary
to allow saving edits to that file without opening it.)
Instead of library reloading, delete the brush from the current file and
re-link it.
The link/append API should probably get support for reloading a single
data-block (and optionally its dependencies) but for now this is not
supported yet.
Pull Request: https://projects.blender.org/blender/blender/pulls/129866
Some modifiers expect the curves to be of type `POLY`.
For such modifiers we need to resample the curves to the
evaluated points so that the modifiers work as expected.
Resolves#129859.
Pull Request: https://projects.blender.org/blender/blender/pulls/129860
The issue was that with a96f1208cc the clamping
of the `View2D` happened in the drawing function
of the channel list. That of course won't work if the
channel list isn't drawn.
The fix is to ALSO clamp in the drawing function of
the main area. The reason this has to be in addition, is that
(I think) the channel box is drawn first. So if the clamping doesn't
happen there, the channels and their keys can lose their vertical
alignment.
Pull Request: https://projects.blender.org/blender/blender/pulls/129864
Armature::collection_array was indexed with -1,
returning an invalid collection.
When the collection index isn't usable, create a new collection
with the default name.
Ref !129608
This reverts commit 0a70360eb6. That's
because it caused issue #129366 which is much more serious, and the
cause is not obvious so far. Another fix will be submitted for the
original issue.
When using AMD official driver clearing depth attachments can fail.
I assume it is related to previous pipeline states and dynamic rendering
that don't require the correct pipeline state for clearing depth
attachments.
Co-authored-by: jeroen@blender.org <Jeroen Bakker>
Pull Request: https://projects.blender.org/blender/blender/pulls/129852
This was likely never an issue so far, as no ID type has ever been
removed (that was written in blendfiles at least), and no new BHead type
has been added since ages.
However, current behavior of the main loop in the readfile code (in
`blo_read_file_internal`) is to consider any BHead type which is not
explicitely known and handled, to be an ID BHead, and directly try to
load it as such.
This commit addresses that potential issue by validating that a BHead
code actually matches a known ID type before trying to use it to read an
ID from the file.
Issue identified while working on designs for future 5.0 forward
compatibility breaking changes in blendfile format itself.
Pull Request: https://projects.blender.org/blender/blender/pulls/129693
Previously the `W` menu was only available for brush tools (brush and
eraser), it should be available to all tools, thus putting the key map
registering function into `km_grease_pencil_paint_mode`.
Pull Request: https://projects.blender.org/blender/blender/pulls/129837
The sample index node specifies the supported geometry types and Grease
Pencil was missing. Note that only the layer domain will work since it's
the only domain accessible by index on GP data directly.
Pull Request: https://projects.blender.org/blender/blender/pulls/129758
When doing action baking, the option "Clear Constraints" mentions
it's doing visual keying while not actually using that option.
Just fixing the description, even though a better solution
would be to revisit the design of the options to see if they
even make sense in some configurations.
Pull Request: https://projects.blender.org/blender/blender/pulls/129052
The issue is that the action line may be there, but containing no action,
`bAnimListElem->data` pointer is a nullptr.
caused by b952782a44
In this refactor the function call was changed from
`BKE_action_frame_range_get` which could handle
the case of a nullptr passed to it.
Pull Request: https://projects.blender.org/blender/blender/pulls/129648
Vulkan backend selection will be hidden behind developer extras. There
are some issues which would not be inviting for users to start testing.
- Some basic functionality are not working (object selection, depth
testing)
- NVIDIA UI artifacts are annoying and unsure where the error is.
- AMD artifacts
- Memory leaks
The backend will still be part of Blender 4.3 only hidden behind an
additional flag.
Ref: #129265, #129262, #127225, #128624, #127768, #127223
Pull Request: https://projects.blender.org/blender/blender/pulls/129799
Qualcomm driver can not handle the optimized SPIR-V that Blender
creates. According to their driver engineers this is an issue in
shaderc. As we are late in the release process they asked us to disable
the optimizations.
In Blender 4.4 we are planning to update shaderc what might fix the
issue. This should be retested after the update.
Pull Request: https://projects.blender.org/blender/blender/pulls/129775
RNA update function called from `rna_property_override_apply_default`
does not have access to active `Scene`, so it is explicitly set to null.
Use `ptr->owner_id` instead of scene provided in argument.
Pull Request: https://projects.blender.org/blender/blender/pulls/129562
Interpolating these attributes as integer values isn't meaningful or
helpful and is potentially problematic. So far I'd guess this is unlikely
to happen in practice which is why it probably hasn't been noticed yet.
Fixes part of #129691.
Pull Request: https://projects.blender.org/blender/blender/pulls/129809
When using the Voxel Remesh operator, there are two possible sources of
crashes currently:
* TBB task stealing in nested parallel loops with thread local data
* Null dereference of PBVH data when pushing sculpt undo steps
To fix the former issue, this commit guards the
`threading::parallel_for` internal function with
`threading::isolate_task` to prevent possible task stealing and
corruption of the thread local data.
Additionally, it has the effect of fixing debug asserts inside
`array_utils::gather` due to the this task stealing.
To fix the latter issue, this commit adds a call to
`BKE_sculpt_update_object_for_edit` to ensure that this data is
populated.
Pull Request: https://projects.blender.org/blender/blender/pulls/129704
The issue is caused by the new way to compute the projection
matrix that tries to recreate it from view3d properties.
This is needed for proper overscan support.
However, this breaks for VR as the view3d is only partially
setup.
Skip the setup in VR and remove overscan for VR to avoid any
possible issues with it.
This fix avoid changing the behavior of the
`ED_view3d_draw_offscreen` which is exposed from our pyGPU
API. The pyGPU API is kind of broken if using custom
projection matrix + overscan, but that's a different issue.
Fix#125456
Pull Request: https://projects.blender.org/blender/blender/pulls/129813
Using array_utils::gather inside an already parallel context with TLS
variables has the possibility of causing data corruption due to task
stealing.
This commit changes them to the sculpt specific gather_mesh_data call
to avoid the nested parallel loop issue.
Pull Request: https://projects.blender.org/blender/blender/pulls/129770
Don't try to use MetalRT by default unless the device explicitly reports that RT is supported. We shouldn't just rely on an assumption that it's supported for M3 and beyond, ad infinitum.
Pull Request: https://projects.blender.org/blender/blender/pulls/129688
This was caused by uninitialized values at border. The correct
number of bricks were reserved but only the unpadded volume
was uploaded. Which was not touching the data of the border
bricks if the size was divisible by `IRRADIANCE_GRID_BRICK_SIZE - 1`.
Fix#127215
Pull Request: https://projects.blender.org/blender/blender/pulls/129810
In the Dope Sheet, show regular keyframes for GreasePencil object data.
The GPv3 transition missed a few cases in the animation
channel/filtering code to add the channels from regular Actions on
GreasePencil data blocks.
Pull Request: https://projects.blender.org/blender/blender/pulls/129807
First issue is that `BKE_modifiers_uses_armature` wasnt working for GP
objects and the second one is that vgroup names are stored in
CurvesGeometry for GP (so that needs special handling, now done, same as
in `BKE_object_defgroup_set_name`).
Pull Request: https://projects.blender.org/blender/blender/pulls/129794
Accidentally added in d70b10dcd4 and moved in dc652aeedb, the
`GREASE_PENCIL_OT_stroke_trim` operator is meant for usage in draw mode
(as the Cutter tool), but not in editmode. It is not the same as the
GPv2 Trim operator, see 4fbef3dc6b
To resolve, remove this from the menu again.
Pull Request: https://projects.blender.org/blender/blender/pulls/129805
Curve maps in nodes like RGB Curves are not drawn nor evaluated outside
of clipping range. This is a regression in 8812be59a4, where the range
of the curve didn't account for points that lie outside of the clipping
range. That's because the table_range variable was initialized before
the loop that updates the minimum and maximum points of the table.
To fix this, we move the table_range initialization after the loop that
updates the minimum and maximum points of the table.
Pull Request: https://projects.blender.org/blender/blender/pulls/129777
Build modifier should start building strokes at a key frame, not always
assume a starting frame of 0.
Frame restriction works the same way as GPv2, which uses absolute
frame number.
Pull Request: https://projects.blender.org/blender/blender/pulls/129774
When grease pencil has no actions (ale->adt), id data block channel is
still added due to `ANIMFILTER_ANIMDATA`. This would lead to crash if
operator is accessing the AnimData (ale->adt). To fix this, make sure
adt exists before creating an animchannel.
Pull Request: https://projects.blender.org/blender/blender/pulls/128841
The 4x4 matrix type has a larger alignment requirement of 16 bytes
than the default, but it was stored in a generic vector of bytes. There
are a few solutions that reduce the memory reuse in this code path--
the chosen solution uses a custom allocator which always allocates
with an alignment that should be large enough for anything.
Generally I think this resampling loop could be rewritten to be a bit
simpler, avoiding these problems in the first place. Some performance
testing would show whether this "fancy" memory use between types
and loop structure is actually worth it. For now though, just correcting
the existing logic seems like the best choice.
Pull Request: https://projects.blender.org/blender/blender/pulls/129628
6c03339e48 moved from
rtcSetNewGeometryBuffer to rtcSetSharedGeometryBuffer but kept the
additional padding of 1 element in the function call.
It was previously used for over-allocating, to allow 16-byte reads of
all accessed elements, as Embree requires.
With rtcSetSharedGeometryBuffer, this argument led to an out-of-bounds
read as memory was already allocated without padding.
float3 is already 16-bytes so there is no need for padding, hence we
remove it.
We can also note that now, even when using rtcSetSharedGeometryBuffer,
over-allocating is not needed as it's done and functional on Embree side
since v3.6.
Pull Request: https://projects.blender.org/blender/blender/pulls/129643
The input `md_eval` is invalidated when calling `BKE_scene_graph_update_for_newframe`.
The fix uses `BKE_modifier_get_original` to pass the original modifier
to `apply_grease_pencil_for_modifier_all_keyframes` then calls `BKE_modifier_get_evaluated`
after `BKE_scene_graph_update_for_newframe` to ensure the `md_eval` pointer is valid.
Pull Request: https://projects.blender.org/blender/blender/pulls/129732
