Start of planned DerivedMesh refactoring. The mface
interfaces in DerivedMesh have been renamed to reflect
their new status as tesselated face interfaces (rather
then the primary ones, which are now stored in mpolys).
short review: mpolys store "primary" face data, while
mfaces store the tesselated form of the mesh (generally
as triangles). mpolys are defined by mloops, and each
mpoly defines a range of loops it "owns" in the main
mloop array.
I've also added basic read-only face iterators, which
are implemented for CDDM, ccgsubsurf, and the bmeditmesh
derivedmesh. Since faces are now variable-length things,
trying to implement the same interface as mfaces would not
have worked well (especially since faces are stored as
an mpoly + a range of mloops).
I figure first we can evaluate these simple read-only
face iterators, then decide if a) we like using iterators
in DerivedMesh, b) how much of it should use them, and c)
if we want write-capable iterators.
I plan to write official docs on this design after I get
it more stable; I'm committing now because there's a rather
lot of changes, and I might do a merge soon.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
Preview renders:
- Added proper button type (BUT_EXTRA) for preview buttons, to
handle drawing better. It now first draws an alpha mask, to
ensure the preview is correctly fitting inside the widget style.
It then draws the outline.
- Added protection for executing preview renders while regular
rendering, that's not going to work...
Nice goodie: Preview renders!
- Added new preview.blend, allowing super wide cinemascope previews
- Draws nicely blended inside widget type, rounded corners
- Preview now renders using all available cpus/cores.
- Uses - hopefully rock stable - method, which doesn't copy or
allocate anything for previews, but just uses render API calls.
- Multiple previews are possible! But, added provision in Jobs
manager to only render one preview job at a time. If you start
more preview jobs, they're suspended until it's their turn.
Bugfix: new buttons context code crashed when going full-window.
Tweaks are still needed for notifiers. I have to figure out still
how to retrieve SpaceButs button view types...
-Many things not yet working properly :)
-Experimental new (hopefully more logical) categorization of buttons, feedback on this is very welcome.
-Separate render & draw types, for example now there is actually a render option "halo" instead of all the different point draw types.
-Particles get recalculated only from buttons that actually change something that has to be recalculated, for example changing visualization doesn't reset particles any more.
-Boid physics buttons are still missing as I'm currently redoing the whole boids code.
-Point caching is still very wip, so baking is not possible for example, but I added a few cache baking flags for rna that were/will be needed for particle buttons logic.
Cleanup commit:
- Yafray removed. Also did cmake/scons files, but didn't compile with it,
so test would be appreciated :)
- Removed old crap from Windows release dir, should be checked on
further by windows release builder later.
* Added material "type" property, with Surface/Volume/Halo
options, compatible with sim_physics, as requested for
material buttons layout. Obviously the Volume setting
does nothing currently.
* Deprecated MA_HALO flag in favor of this.
Assorted smaller fixes:
- Fix: modal keymaps for editmode in view3d were not set again
when you copy areas or go fullscreen.
- Improved "redo last op" (F6) to search back in history for
a redoable operator. Operator also used wrong pupmenu type.
- On creating new FCurve editor, the channel rainbow colors are
set correct.
- EditMesh: fixed code for Spin/Screw, correct props, init and
error reporting. (Spin hotkey ALT+R temporary)
- recompiled all to check for uninitialized variable warnings.
(compile flag should be -O for this). Fixed some proto's.
Safe method to move render results to the displayed image.
It now allocates a single image for display, and on each
refresh callback from render, it copies the refreshed
section over to this image, in 32 bits. While rendering
that image then only shows progress updates, as usual.
This also now works for scenes in composte and results
for composite.
This should solve reported crashes for MBlur or SSS.
Render back! And not only back, even full threaded now. :)
Current state is unfinished, but too much fun to not to
commit for review and test!
WARNING: because render is in a threaded job, it will
use data as can be edited in the UI. That'll crash in many
cases of course... the idea is to limit UI usage to viewing
stuff, especially for the Image Window to inspect layers
or zoom in/out.
What works now;
- F12 render (no anim)
- ESC from render
- ESC pushes back temporary Image Window
- Render to ImageWindow or full-screen.
- Executing composites, and edit composites after render.
Note that the UI is 100% responsive in a render, you can
switch screens, slide area dividers around, or even load
a new file during render. :) It's quite stable even.
I'll collect all crash reports especially to get a good
picture of where the protection is required at least.
Also added: XKey "Delete Objects", to get things crash...
unfortunately it didn't for me.
* Cleaned up UI_interface.h a bit, and added some comments to
organize things a bit and indicate what should be used when.
* uiMenu* functions can now be used to create menus for headers
too, this is done with a uiDefMenuBut, which takes a pointer
to a uiMenuCreateFunc, that will then call uiMenu* functions.
* Renamed uiMenuBegin/End to uiPupMenuBegin/End, as these are
specific to making popup menus. Will convert the other
conformation popup menu functions to use this too so we can
remove some code.
* Extended uiMenu functions, now there is is also:
BooleanO, FloatO, BooleanR, EnumR, LevelEnumR, Separator.
* Converted image window headers to use uiMenu functions, simplifies
menu code further here. Did not remove the uiDefMenu functions as
they are used in sequencer/view3d in some places now (will fix).
* Also tried to simplify and fix bounds computation a bit better
for popup menus. It tried to find out in advance what the size
of the menu was but this is difficult with keymap strings in
there, now uiPopupBoundsBlock can figure this out afterwards and
ensure the popup is within the window bounds. Will convert some
other functions to use this too.
Added WM Jobs manager
- WM can manage threaded jobs for you; just provide a couple
of components to get it work:
- customdata, free callback for it
- timer step, notifier code
- start callback, update callback
- Once started, each job runs an own timer, and will for
every time step check necessary updates, or close the
job when ready.
- No drawing happens in jobs, that's for notifiers!
- Every job stores an owner pointer, and based on this owner
it will prevent multiple jobs to enter the stack.
Instead it will re-use a running job, signal it to stop
and allow caller to re-initialize it even.
- Check new wm_jobs.c for more explanation. Jobs API is still
under construction.
Fun: BLI_addtail(&wm->jobs, steve); :)
Put Node shader previews back using wmJobs
- Preview calculating is now fully threaded (1 thread still)
- Thanks to new event system + notifiers, you can see
previews update even while dragging sliders!
- Currently it only starts when you change a node setting.
Warning: the thread render shares Node data, so don't delete
nodes while it renders! This topic is on the todo to make safe.
Also:
- bug in region initialize (do_versions) showed channel list in
node editor wrong.
- flagged the channel list 'hidden' now, it was really in the
way! This is for later to work on anyway.
- recoded Render API callbacks so it gets handlers passed on,
no globals to use anymore, remember?
- previewrender code gets now so much nicer! Will remove a lot
of stuff from code soon.
Finally, here is the basic (functional) prototype of the new animation system which will allow for the infamous "everything is animatable", and which also addresses several of the more serious shortcomings of the old system. Unfortunately, this will break old animation files (especially right now, as I haven't written the version patching code yet), however, this is for the future.
Highlights of the new system:
* Scrapped IPO-Curves/IPO/(Action+Constraint-Channels)/Action system, and replaced it with F-Curve/Action.
- F-Curves (animators from other packages will feel at home with this name) replace IPO-Curves.
- The 'new' Actions, act as the containers for F-Curves, so that they can be reused. They are therefore more akin to the old 'IPO' blocks, except they do not have the blocktype restriction, so you can store materials/texture/geometry F-Curves in the same Action as Object transforms, etc.
* F-Curves use RNA-paths for Data Access, hence allowing "every" (where sensible/editable that is) user-accessible setting from RNA to be animated.
* Drivers are no longer mixed with Animation Data, so rigs will not be that easily broken and several dependency problems can be eliminated. (NOTE: drivers haven't been hooked up yet, but the code is in place)
* F-Curve modifier system allows useful 'large-scale' manipulation of F-Curve values, including (I've only included implemented ones here): envelope deform (similar to lattices to allow broad-scale reshaping of curves), curve generator (polynomial or py-expression), cycles (replacing the old cyclic extrapolation modes, giving more control over this). (NOTE: currently this cannot be tested, as there's not access to them, but the code is all in place)
* NLA system with 'tracks' (i.e. layers), and multiple strips per track. (NOTE: NLA system is not yet functional, as it's only partially coded still)
There are more nice things that I will be preparing some nice docs for soon, but for now, check for more details:
http://lists.blender.org/pipermail/bf-taskforce25/2009-January/000260.html
So, what currently works:
* I've implemented two basic operators for the 3D-view only to Insert and Delete Keyframes. These are tempolary ones only that will be replaced in due course with 'proper' code.
* Object Loc/Rot/Scale can be keyframed. Also, the colour of the 'active' material (Note: this should really be for nth material instead, but that doesn't work yet in RNA) can also be keyframed into the same datablock.
* Standard animation refresh (i.e. animation resulting from NLA and Action evaluation) is now done completely separate from drivers before anything else is done after a frame change. Drivers are handled after this in a separate pass, as dictated by depsgraph flags, etc.
Notes:
* Drivers haven't been hooked up yet
* Only objects and data directly linked to objects can be animated.
* Depsgraph will need further tweaks. Currently, I've only made sure that it will update some things in the most basic cases (i.e. frame change).
* Animation Editors are currently broken (in terms of editing stuff). This will be my next target (priority to get Dopesheet working first, then F-Curve editor - i.e. old IPO Editor)
* I've had to put in large chunks of XXX sandboxing for old animation system code all around the place. This will be cleaned up in due course, as some places need special review.
In particular, the particles and sequencer code have far too many manual calls to calculate + flush animation info, which is really bad (this is a 'please explain yourselves' call to Physics coders!).
soc-2008-nicholasbishop branch.
Note: any old code with multires_test() or multires_level1_test() can
just be deleted, not needed by the multires modifier.
Think global, act local!
The old favorite G.scene gone! Man... that took almost 2 days.
Also removed G.curscreen and G.edbo.
Not everything could get solved; here's some notes.
- modifiers now store current scene in ModifierData. This is not
meant for permanent, but it can probably stick there until we
cleaned the anim system and depsgraph to cope better with
timing issues.
- Game engine G.scene should become an argument for staring it.
Didn't solve this yet.
- Texture nodes should get scene cfra, but the current implementation
is too tightly wrapped to do it easily.
From the anti-globalization department:
G.obedit terminated!
Wherever possible, use CTX_data_edit_object(C) to get this
now. It's stored in scene now, and the screen context has
it defined.
Cleanup
- for portablity we can keep the old ugly defines for retrieving
active object, cfra and so on. But, they will use 'scene' not
G.scene.
- fixed code that uses those defines.
- some unused variables/functions removed
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r12987:17416
Issues:
* GHOST/X11 had conflicting changes. Some code was added in 2.5, which was
later added in trunk also, but reverted partially, specifically revision
16683. I have left out this reversion in the 2.5 branch since I think it is
needed there.
http://projects.blender.org/plugins/scmsvn/viewcvs.php?view=rev&root=bf-blender&revision=16683
* Scons had various conflicting changes, I decided to go with trunk version
for everything except priorities and some library renaming.
* In creator.c, there were various fixes and fixes for fixes related to the -w
-W and -p options. In 2.5 -w and -W is not coded yet, and -p is done
differently. Since this is changed so much, and I don't think those fixes
would be needed in 2.5, I've left them out.
* Also in creator.c: there was code for a python bugfix where the screen was not
initialized when running with -P. The code that initializes the screen there
I had to disable, that can't work in 2.5 anymore but left it commented as a
reminder.
Further I had to disable some new function calls. using src/ and python/, as
was done already in this branch, disabled function calls:
* bpath.c: error reporting
* BME_conversions.c: editmesh conversion functions.
* SHD_dynamic: disabled almost completely, there is no python/.
* KX_PythonInit.cpp and Ketsji/ build files: Mathutils is not there, disabled.
* text.c: clipboard copy call.
* object.c: OB_SUPPORT_MATERIAL.
* DerivedMesh.c and subsurf_ccg, stipple_quarttone.
Still to be done:
* Go over files and functions that were moved to a different location but could
still use changes that were done in trunk.
Robin (Frrr) Allen did a decent job on this, so we can also welcome him
as a member in the svn committers team to maintain it!
I do the first commit with some minor fixes:
- get Makefiles work
- fix rounding issue with tiles on unit faces
- removed UI includes from tex node
A nice doc in wiki is here:
http://wiki.blender.org/index.php/User:Frr/TexnodeManual
On the todo for Robin is:
- When using one or more Texture-input nodes, you cannot edit them by activating
(as works now for Material nodes).
- The new "output node" option fails on the default case, when only one
output node is active. It then shows often a blank menu. Will get fixed asap.
- When using a NodeTree-Texture as input node, the menu for 'active output'
should not show. NodeTree should ignore other nodetrees to keep things sane
for now.
- On a future todo is proper usage of "Dxt" and "Dyt" texture vectors for
superior antialising of checkers/bricks.
General note; I know people are dying to get a full integrated shader system
with nodes. In theory we could merge this with Material Nodetrees... but I
rather wait for a solid and very well thought out design proposal for this,
also including design ideas for unifying with a shader language (GPU, CPU).
For the time being this is a nice extension of current textures. :)
Bah... fix for envmaps just before 2.48 release gave good looking envmaps
only when there was no sky involved...
The alpha in environment maps should be reset to 255... something that was
never done before, but also didn't show errors until other fixes in image
rendering were done.
Particle system crashed in convertblender, missing NULL check.
This fixes crash, render survives, but I doubt it was meant so...
Will leave it Janne to evaluate later.
regression files, it showed small dark outline errors on envmap.
This commit rewinds bugfix #8437, which actually had to be fixed on
another location in code, which was done a few weeks ago. :)
Index OB pass didn't support FSA for Ztransp.
Also made buttons to set black/white for non-RGBA images hide in Image Window,
the Curves color code only supports 4 channels atm.
