When editbones were selected from the Outliner (and they were connected
to a parent) with the 'Sync Selection' option turned ON, they could not
get duplicated.
For duplication to work, the (connected) parent bone's tip also has to
be selected [which was not the case when selection is done from the
Outliner under above circumstances]. The reason being that
armature_duplicate_selected_exec ->
ED_armature_edit_sync_selection clears the BONE_ROOTSEL flag if the
parent bone's BONE_TIPSEL is not set.
Caused by rB71eb65328078 btw.
The correct "parent-tip-selection" would actually happen in activation
- `tree_element_active_ebone`
-- `tree_element_active_ebone__sel`
but for 'Sync Selection' this happens [also] in
- `outliner_sync_selection_from_outliner`
-- `outliner_select_sync_to_edit_bone`
which did not do the "flushing" to the parent bone's tip
Now use existing dedicated function for this.
ref. T82347
Reviewers: Zachman
Differential Revision: https://developer.blender.org/D9470
The draw face sets brush uses the poly center when used in meshes to increase
its precision when working in low poly geometry. For this to work with deformed
meshes, the deformed coordinates from the PBVH should be used instead.
Reviewed By: sergey
Maniphest Tasks: T81915
Differential Revision: https://developer.blender.org/D9424
BKE_mesh_free() seems to not free the meshes correctly, so using BKE_id_free() instead.
The looptri array was also not freed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9426
The two entries `TFM_MODAL_AUTOCONSTRAINT` and
`TFM_MODAL_AUTOCONSTRAINTPLANE` had the same name
displayed in the UI. The latter is now includes
"plane" in it's name.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9474
Even after the last commit to fix this assert, it still fails in the
case where a button was added before there was a button group
added to the block. Another fix for this would be to always create
a button group in UI_block_begin, but this assert has no particular
purpose, so it's simpler to just remove it.
Set step in RNA property definition.
There was a hardcoded setting of a1 for this specific button, which
used to be the variable to store the step size of number buttons until
rBe6f0b60c2e91. hardcoded value is removed in rBe29206f86a5f.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9277
This patch will apply the view transform when a movie clip is used as
camera background image. It does this by rendering the image in the
color buffer when it needs the view transform. For other images it uses
the overlay buffer.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7067
Issue was that the `tris_per_mat` are not created when the first batch is drawn
during select operator and then is not created when needed by the workbench pass
since they are not tracked by mesh_buffer_cache_create_requested.
This change will create the `tris_per_mat` just in case they are needed later.
Solution by Clément Foucault
Differential Revision: https://developer.blender.org/D9430
The issue was that the volume for the current frame
might not have been loaded already by the time the
modifier runs.
The solution is simply to make sure that the volume
is loaded. This is similar to the Volume Displace modifier.
When there was an active button in the "old" block from the last redraw,
this code tried to replace its pointer in the new block's button groups.
But in cases like the outliner or file browser, there are no groups
because the block doesn't use the layout system at all. This commit
just tweaks the assert to check whether there are any button groups.
This enables self intersections in the sculpt trimming tools boolean operations.
This should fix wrong booleans results after using the operator to add new disconnected
geometry with the join mode.
Reviewed By: sergey
Maniphest Tasks: T81799
Differential Revision: https://developer.blender.org/D9423
The cloth brush fixed simulation areas are created using the initial_location variable in the
StrokeCache. This variable was not being updated by tiling symmetry, so all symmetry passes
were using the same simulation area location.
Reviewed By: sergey
Maniphest Tasks: T81842
Differential Revision: https://developer.blender.org/D9421
When extracting new objects from a mesh in sculpt mode, it makes sense to keep
the current symmetry options and settings in the new mesh. In previous versions symmetry
options were stored in the tool settings, so this bug was not that obvious.
This also preserves the remember settings in the new object, which is also the desired
behaviour.
Reviewed By: sergey, mont29
Differential Revision: https://developer.blender.org/D9417
If the new object contains the mask it always needs to be cleared before starting
sculpting on it.
This fix was also committed before in the mask extract operator.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9416
The list of buttons in the button group needs to be updated to take into
account the old button inserted into the button list for the new block.
Differential Revision: https://developer.blender.org/D9428
What I thought was an "optimization" was really a bug. The "use search
for expansion" value needs to be set for every panel, even panels in
other tabs. Otherwise it won't be properly set when switching back to
a tab that was visited during search.
Differential Revision: https://developer.blender.org/D9427
The links where added to the socket one after the other. However,
the virtual socket had a link limit of 1, so whenever a new link was
added, the previously added one was removed.
There is not really a reason for why the link limit should be 1 instead
of something higher. I'm setting it to the max value: `0xFFF`.
I'm also setting the `input_link_limit` to that value. Blender does not
need this currently, but addons might have input sockets that allow
more than one incident link.
Default backbuffers needs not to be bound with sRGB encoding
enabled. This works when using `GPU_framebuffer_restore` but
using `GPU_framebuffer_bind` would trigger the wrong behavior.
This fix T81969 UI turns whiteish when playing video sequence
based on a scene and moving in the image editor after saving
Surface deform weight calculation assigned weights in a non-uniform
way that caused vertices to deform upon binding.
This was caused by the face-corner angle being used in
calculations which where squared & scaled.
Causing a triangle fan of many thin faces to have a much greater
influence compared to the same shape made from a single triangle.
Change the calculation of the weight so each face-corner is scaled
by it's angle.
Ensure that When checking "Hide in Viewport" option for a collection
that child objects are drawn grayed out for consistency with the
"Disable in Viewports" toggle.
For checking an object visibility in the viewport the flag
BASE_VISIBLE_VIEWLAYER should be used instead of BASE_VISIBLE_DEPSGRAPH
because the latter ignores viewport visibility.
Manifest Task: T77161
Differential Revision: https://developer.blender.org/D7904
In some situations where two beveled edges were very close to in-line
but not quite straight, bevel would build a miter when it shouldn't.
The code that chose whether to use a miter at each vertex was slightly
incorrect.
For outer miters there is a check for 3 or more selected edges, but an
inner miter can still be useful with only two beveled edges at a vertex,
so we can't use that here. Instead I changed the check for in-line edges
to run before determining whether the angle is reflex or not. The logic
ends up a bit more straightforward as well. This doesn't completely
remove the rather strange looking triangle vertex meshes at each corner,
but it does make it stable when locations are slightly adjusted.
The only other place this `edges_angle_kind` function was used is for
profile=1.0 vertex meshes. I tested and made sure that still works well.
Differential Revision: https://developer.blender.org/D9420
For the fast solver, there was an optimization carried over
from the non-collection case for empty meshes which did not
work in the chained boolean code for collection operands.
Removed that optimization in the collection case.
The code that decided to use a faster double version of plane
side testing forgot to take an absolute value, so half the time
the exact code was being used when it was unnecessary.
Ensure parenting an object to itself is seen as error, by returning
`false`.
This error was introduced as part of a supposed-to-be-non-functional
cleanup rBb8d4a2aff8069dd7d6fb91ad0d9427eed489b68f.
This adds support for treating multiple undo steps as a single step
from the user perspective.
This is needed for outliner mode switching and `object.switch_object`
operator which change active object and mode in a single action.
