Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
When using multiple monitors that differ in scale and/or dpi, the
varying sizes of the window titles and borders can cause the placement
of those windows to be out by a small amount. This patch adjusts for
those differences on Windows 10 and newer.
see D10863 for details and examples.
Differential Revision: https://developer.blender.org/D10863
Reviewed by Ray Molenkamp
`UILayout.operator_menu_enum()` now returns the operator properties, just like
`UILayout.operator()`. This makes it possible to set options for the operator
displayed in the menu. In C it can be done through the new
`uiItemMenuEnumFullO()` or `uiItemMenuEnumFullO_ptr()`.
It's reasonable to have this, probably just a small thing never bothered to
add. D10912 could use it, the following comment can be addressed now too:
https://developer.blender.org/diffusion/B/browse/master/source/blender/editors/space_nla/nla_buttons.c$583-586
This is just some cleanup of the Win32 window creation code. After
CreateWindowExW() this patch uses some early exits to replace some
potentially confusing if blocks. No functional changes.
Differential Revision: https://developer.blender.org/D11446
Reviewed by Ray Molenkamp
When compiling BSDF nodes, we only assing stack space to the normal and
tangent inputs if they are linked. However, it could be that the
ConstantFolder removed the link, so checking if there is a link fails
to take this into account.
To fix this, added a flag to ShaderInput to keep track of whether a
constant was folded into the input, and use it as well to verify that
the socket is linked when assigning stack space.
Reviewed By: brecht
Maniphest Tasks: T70615
Differential Revision: https://developer.blender.org/D11731
Mask value works just like transparency mask.
You are able to select intersection lines inside a
collection or, between collections.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D11309
Removed in b787581c9c as it's comment
noted it was bad code, the reason for it's necessity was no longer valid.
Add this back with comment explaining why it's still needed.
Use const arguments to simplify further optimizations.
Transforming elements shouldn't need to change their containers
data-structures.
ElementResize for grease pencil stroke thickness was
modifying TransInfo.num & TransInfo.values_final.
Now copies are operated on to preserve const correctness although
it's worth investigating if this can be avoided altogether.
- Added functions to check if the cursor is at a number.
- Added function to parse a number.
- Joined skip_separator functions.
- Added function to check if cursor is at any given set of characters.
AMD Drivers didn't report an additional space in the rendered. This made
testing for the HQ workaround fail and the issue appeared back on
certain cards.
This fix will test with surrounding spaces or if the renderer name
endswith the given string. If any of these are the case the hq normals
workaround will be enabled.
Fixing small typo of word "multi" in function identifier by renaming
"count_mutli_input_socket_links" to "count_multi_input_socket_links"
Differential Revision: https://developer.blender.org/D11732
Reviewed by Hans Goudey
This commit avoids duplicating the deformed control point
list twice by modifying the list in the object curve cache directly.
For curves, the original control point data was duplicated into a
local listbase, deformed, used to create the "bevel list" data, and
then duplicated again for the object-level storage of deformed
control points. Text objects and surface objects had a similar
unnecessary duplication.
The curve bevel list was freed, and then freed again in a call to the
function that recalulates it. The curve "anim path" data was freed
only to be freed again in its calculation function as well. Also move
the anim_path calculation directly after the bevel list creation to
make its requirements more explicit.
Surface objects were already handled by an early return in the main
"curve types" function. This commit splits them, renames the funtions
to match (and be more consistent with other names), and sanitizes the
checking of object types.
Every call to `BKE_displist_make_curveTypes` already checks the object
type beforehand, there is no need to check it again. Also removed an
outdated comment.
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
Sometimes the current spline list isn't part of the original curve, like
when using the deformed control points, etc. This will be helpful in
the curve modifier stack.
While the const correctness of `ListBase` is quite limited, it's helpful
to have a way to retrieve the `Nurb` list from curve object data without
casting away const from the curve.
There is no longer a need to resize windows that are _already_ open,
since temporary windows can no longer take over the space used by other
already-open temporary windows. This primarily affects Preferences and
Render windows.
see D11721 for more details.
Differential Revision: https://developer.blender.org/D11721
Reviewed by Julian Eisel
Likely uncovered by 6c97c7f767, the actual mistake would be from
6942dd9f49.
The hacks to display text buttons for renaming in UI-Lists used the emboss of
the text button for handling logic. It relied on the emboss `NONE` but we also
introduced `NONE_OR_STATUS` with 6942dd9f49. Both values need to be treated
equally for the logic of this hack to work.
The change in `interface_layout.c` is actually not needed for this exact issue,
but it's the correct thing to do. There may actually be more cases where `NONE`
and `NONE_OR_STATUS` need to be treated equally. Something to be checked still.
Custom properties defined on objects are not accessible from the
attribute node when rendering a volume in Cycles. This is because
this case is not handled.
To handle it, added a primitive type for volumes in the kernel,
which is then used in the initialization of ShaderData and to
check whether an attribute lookup is for a volume.
`volume_attribute_float4` is also now checking the attribute
element type to dispatch to the right lookup function.
Reviewed By: #cycles, brecht
Maniphest Tasks: T87194
Differential Revision: https://developer.blender.org/D11728
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
In ViewLayer view, overrides of excluded collections would then show one
level higher, due to bad handling of those excluded collection in draw
code.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS.
Passing `emboss=False`set `UI_EMBOSS_NONE` in the layout, which
completely disables button background colors for things like animation
state. This commit changes that to `UI_EMBOSS_NONE_OR_STATUS`,
which effectively restores the behavior to what it was prior to the
addition of that flag, with the added option to completely disable
the status emboss with `UI_EMBOSS_NONE`.
This adds a new Attributes panel in the mesh properties editor.
It shows a list of all the generic attributes on the mesh.
In the future, we want to show built-in and other attributes in the
list as well. Related technical design tasks: T88460, T89054.
There is also a new simple name collision check that warns the user
when there are multiple attributes with the same name. This can be
problematic when the attribute is supposed to be used in geometry
nodes or during rendering.
Differential Revision: https://developer.blender.org/D11276
