Need to also check for cu->editfont for text edit mode...
Also use modifier_isEnabled() to make general tests whether a modifier should be applied or skipped.
`````|````` | | | ..''''
| | | |______ .''
| | | | ..'
| | |_______ |___________ ....''
merge to TRUNK!
* The old compositor is still available (Debug Menu: 200)
This commit was brought to you by:
Developers:
* Monique Dewanchand
* Jeroen Bakker
* Dalai Felinto
* Lukas Tönne
Review:
* Brecht van Lommel
Testers:
* Nate Wiebe
* Wolfgang Faehnle
* Carlo Andreacchio
* Daniel Salazar
* Artur Mag
* Christian Krupa
* Francesco Siddi
* Dan McGrath
* Bassam Kurdali
But mostly by the community:
Gold:
Joshua Faulkner
Michael Tiemann
Francesco Paglia
Blender Guru
Blender Developers Fund
Silver:
Pablo Vazquez
Joel Heethaar
Amrein Olivier
Ilias Karasavvidis
Thomas Kumlehn
Sebastian Koenig
Hannu Hoffrén
Benjamin Dansie
Fred M'ule
Michel Vilain
Bradley Cathey
Gianmichele Mariani
Gottfried Hofmann
Bjørnar Frøyse
Valentijn Bruning
Paul Holmes
Clemens Rudolph
Juris Graphix
David Strebel
Ronan Zeegers
François Tarlier
Felipe Andres Esquivel Reed
Olaf Beckman
Jesus Alberto Olmos Linares
Kajimba
Maria Figueiredo
Alexandr Galperin
Francesco Siddi
Julio Iglesias Lopez
Kjartan Tysdal
Thomas Torfs
Film Works
Teruyuki Nakamura
Roger Luethi
Benoit Bolsee
Stefan Abrahamsen
Andreas Mattijat
Xavier Bouchoux
Blender 3D Graphics and Animation
Henk Vostermans
Daniel Blanco Delgado
BlenderDay/2011
Bradley Cathey
Matthieu Dupont de Dinechin
Gianmichele Mariani
Jérôme Scaillet
Bronze (Ivo Grigull, Dylan Urquidi, Philippe Derungs, Phil Beauchamp, Bruce Parrott, Mathieu Quiblier, Daniel Martinez, Leandro Inocencio, Lluc Romaní Brasó,
Jonathan Williamson, Michael Ehlen, Karlis Stigis, Dreamsteep, Martin Lindelöf, Filippo Saracino, Douwe van der Veen, Olli Äkräs, Bruno D'Arcangeli,
Francisco Sedrez Warmling, Watchmike.ca, peter lener, Matteo Novellino, Martin Kirsch, Austars Schnore, KC Elliott, Massimiliano Puliero, Karl Stein,
Wood Design Studios, Omer Khan, Jyrki Kanto, Michał Krupa, Lars Brubaker, Neil Richmond, Adam Kalisz, Robert Garlington, Ian Wilson, Carlo Andreacchio,
Jeremias Boos, Robert Holcomb, Gabriel Zöller, Robert Cude, Natibel de Leon, Nathan Turnage, Nicolas Vergnes, Philipp Kleinhenz, Norman Hartig, Louis Kreusel,
Christopher Taylor, Giovanni Remondini, Daniel Rentzsch, Nico Partipilo, Thomas Ventresco, Johannes Schwarz, Александр Коротеев, Brendon Harvey,
Marcelo G. Malheiros, Marius Giurgi, Richard Burns, Perttu Iso-Metsälä, Steve Bazin, Radoslav Borisov, Yoshiyuki Shida, Julien Guigner, Andrew Hunter,
Philipp Oeser, Daniel Thul, Thobias Johansson, Mauro Bonecchi, Georg Piorczynski, Sebastian Michailidis, L M Weedy, Gen X, Stefan Hinze, Nicolò Zubbini,
Erik Pusch, Rob Scott, Florian Koch, Charles Razack, Adrian Baker, Oliver Villar Diz, David Revoy, Julio Iglesias Lopez, Coen Spoor, Carlos Folch,
Joseph Christie, Victor Hernández García, David Mcsween, James Finnerty, Cory Kruckenberg, Giacomo Graziosi, Olivier Saraja, Lars Brubaker, Eric Hudson,
Johannes Schwarz, David Elguea, Marcus Schulderinsky, Karel De Bruijn, Lucas van Wijngaarden, Stefano Ciarrocchi, Mehmet Eribol, Thomas Berglund, Zuofei Song,
Dylan Urquidi )
Added four new functions as shortcuts to creating GHashes that use the
standard ptr/str/int/pair hash and compare functions.
GHash *BLI_ghash_ptr_new(const char *info);
GHash *BLI_ghash_str_new(const char *info);
GHash *BLI_ghash_int_new(const char *info);
GHash *BLI_ghash_pair_new(const char *info);
Replaced almost all occurrences of BLI_ghash_new() with one of the
above functions.
- Triangulate Cloth Mesh for collisions
- Speed up collisions
- Remove EL Topo code
- Prepare code to incooperate El Topo self collisions (TODO next commits)
TODO:
----------
- Triangulation: Is custom data/uv preserved correctly?
- Use MPoly not tessface?
... instead add scene.sequencer_editor_create / clear, these match id.animation_data_* functions.
- refactor for names, for scene level functions call them BKE_sequencer_*
--- Changes to File Output node ---
* Flat layer names in EXR multilayer files.
For a socket with name "AAA" the previous resulting EXR layer name would be "AAA.AAA", i.e. the render layer as well as render pass would use the socket name.
Now the "render_layer.render_pass" scheme is ignored in multilayer files, socket names are directly written to EXR layers (EXR layer name is "AAA" in this example). If sockets should have a notion of "render layer" this can still be achieved by explicitly adding a separator, e.g. "AAA.BBB". When loading such layers into a Blender Image struct, the name is interpreted as a "render_layer.render_pass" again (although the image node does not care about it, see below).
* Socket sub-paths (for singlelayer) or layer names (for multilayer) are stored in dedicated string variables in the socket storage data. This way the RNA can define precise string subtypes (PROP_FILEPATH) and length. The file/layer slots are defined as separate structs with own name properties in the RNA as well, so they can be used nicely with the list template.
* Ensure unique socket paths/layer names to prevent overwriting of files and layers respectively.
--- Changes to Image node ---
* Loading multilayer OpenEXR files has improved layer name splitting into render layer + render pass names now. This properly supports arbitrary EXR layer names now.
Example:
OpenEXR layer name: AAA.BBB.CCC
is split into
Render layer name: AAA.BBB
Render pass name: CCC
If the layer name has no '.' separators the render layer name is empty.
* Image node ignores the selected render layer in the image user data. Instead all existing layers are displayed at the same time by combining the render layer names with render pass names again, to reconstruct the original EXR layer name. This avoids the problem that render layers with empty name are not selectetable in the dropdown and allows using all image layers at the same time without duplicating the node.
* Add new CCG function ccgSubSurf_setAllocMask(). Similar to to
ccgSubSurf_setCalcVertexNormals(), it sets whether the CCG elements
have a mask layer and what that layer's offset is. Unlike normals
however, it doesn't change any behavior during CCG calculation; it's
there only to give CCGKey information on the mask.
* Add a new flag to _getSubSurf(), CCG_ALLOC_MASK. If set, space for
an extra layer is allocated, but the number of CCG layers is not set
to include it. This is done because GridPaintMasks are absolute,
rather than being relative to the subdivided output (as MDisp
displacements are), so we skip subdividing paint masks here.
* Add a new flag to subsurf_make_derived_from_derived(),
SUBSURF_ALLOC_PAINT_MASK. This controls whether CCG_ALLOC_MASK is
set for _getSubSurf(). Related, masks are never loaded in during
ss_sync_from_derivedmesh(). After subdivision is finished, if the
alloc mask flag is set, the number of CCG layers is increase to 4
with ccgSubSurf_setNumLayers().
* Add a new flag to multires_make_from_derived(),
MULTIRES_ALLOC_PAINT_MASK. Not all multires functions need paint
mask data (e.g. multiresModifier_base_apply.) This flag is always
set in MOD_multires.c so that subdividing a mesh with a mask updates
properly even when not in sculpt mode.
* Update multiresModifier_disp_run() to apply, calculate, and add mask
elements. It's almost the same as the existing operations with xyz
coordinates, but treats masks as absolute rather than displacements
relative to subdivided values.
* Update multires_customdata_delete to free CD_GRID_PAINT_MASK in
addition to CD_MDISPS.
* Update multires_del_higher() to call the new function
multires_grid_paint_mask_downsample(), which allocates a
lower-resolution paint mask grid and copies values over from the
high-resolution grid.
CD_PAINT_MASK is a layer of per-vertex floats for non-multires
meshes. Multires meshes use CD_GRID_PAINT_MASK, which is a layer of
per-loop GridPaintMask structures. GridPaintMask is similar to MDisp,
but contains an array of scalar floats.
Note: the GridPaintMask could be folded into MDisp, but this way
should be easier to add mask layers in the future (if we do fold
GridPaintMask into MDisp, the mask array should probably be an array
of arrays with a 'totmask' field so that mask layers can be easily
supported.)
Includes blenload read/write support for CD_PAINT_MASK and
CD_GRID_PAINT_MASK.
* Changes to DerivedMesh interface: DMGridData has been removed,
getGridData() now returns an array of CCGElem pointers. Also added
getGridKey() to initialize a CCGKey (implemented only by
CCGDerivedMesh.)
* PBVH: added BLI_pbvh_get_grid_key().
* A lot of code is affected, but mainly is just replacing
DMGridData.co, DMGridData.no, and sizeof(DMGridData) with the
CCG_*_elem functions, removing the reliance on grid elements of
exactly six floats.
CCGKey caches information about the CCGSubSurf element layout. This
data, along with the CCG_* inline functions, allows access to
CCGSubSurf elements with an arbitrary number of layers (as opposed to
the hardcoded DMGridData structure which assumes xyz coordinates
followed by three normal components.)
The CCGElem structure is declared but not defined anywhere, just used
as a convenient type.
The layout of vert data in CCGSubSurf is almost the same; previously
it was three floats (for xyz coordinate) optionally followed by three
floats for the normal. The only change is that the first three floats
can now be any number of floats.
* _getSubSurf takes a numLayers parameter to set the number of layers,
stored in CCGMeshIFC.numLayers.
* All calls to _getSubSurf currently have numLayers set to 3, except
for UV subsurf, where it is reduced to 2 (with a corresponding
change when reading the results out to use float (*)[2] rather than
float (*)[3].)
* The various VertData* macros in CCGSubSurf.c are now functions that
take a CCGSubSurf pointer, which provides access to CCGMeshIFC,
which has numLayers.
* Add ccgSubSurf_setNumLayers() to the API. Only changes the number of
layers that get subdivided, doesn't change the amount of memory
allocated. So if space for N layers is allocated, it's safe to set
the number of layers to less than N, but not more.
* The rest of the changes are just adding the 'ss' parameter.
Changed name to multires_make_derived_from_derived() and parameter
order to be more similar to subsurf_make_derived_from_derived().
Added MultiresFlags enum with flag values to replace the local_mmd and
useRenderParams parameters.
from Dan Eicher (dna)
--- message from the tracker
Classes for all effect types with proper input attributes
Added new/delete functions for SequenceEditor.sequences.
push/pop functions for ImageSequence.elements to add/remove images
Moved waveform from the base class to SoundSequence (probably should be renamed use_waveform or show_waveform)
Fixed user count for scene and movie clip types
--- my own comments
- dont have blending mode argument from sequencer.new_*() functions. Better edit this after.
- dont change waveform attribute, seems unrelated change and should be kept for sound afaik.
- dont apply scene, clip usercount changes - Sergey dealt with these separately.
