When splitting a Quad View by dragging a corner an quad area can become
negative size because of a one pixel offset to calculate the start of
the area.
This patch solves this to make sure that there are no negative areas. By
adapting the `ARegion.winrct`.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D6579
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
Previously the decimation would take the whole curve into account when
decimating and not just the selected part.
This also contains various smaller bug fixes for the fcurve decimation.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D6286
To recreate the main issue:
* Set render and file browser to show in full-screen in the preferences
* Default scene, press F12 in 3D View
* Press Alt+S to save the image
* Escape the file browser
* Escape the image editor
The former 3D View would now show the image editor. This is a common
use-case that should work.
Full-screen code is a hassle to get to work as expected. There are
reports from 2.5, I did lots of work years ago to get these kind of
use-cases to work fine. But apparently I broke this one with a fix for
another common use-case in March (0a28bb1422).
This now stores hints in the space, rather than the area, which should
make things much more controlable and hopefully help us fix issues like
this.
Here are a few references describing further common issues (all should
work fine now): 0a28bb1422, e61588c5a5, T19296
Checked over this with Bastien, we agreed that at some point we should
do a big rewrite of all of this, for now this is acceptable.
flipped to bottom
While flipping the header to bottom works in the MCE (because MCE doesnt
allow overlapping UI) we need to take the regions visible rect into
account for the Image Editor.
Also correct clickable scubbing area (poll for frame_change) in the
Image Editor and the MovieClip Editor not taking UI_DPI_FAC into
account.
Maniphest Tasks: T70905
Differential Revision: https://developer.blender.org/D6090
Incorrect cursor shown for horizontal split when selected from edge context menu.
Differential Revision: https://developer.blender.org/D6124
Reviewed by Campbell Barton
Only regions with alignment set should be toggle-able. If this is not
set, then the region is likely either a main region, or entirely hidden
by the user (not just collapsed).
Adds a check when starting blender if your platform is supported. We use a blacklist
as drivers are updated more regular then blender (stable releases).
The mechanism detects if the support level changed or has been validated by the user previously.
Changes can happen due to users updating their drivers, but also when we change the support
level in our code base.
When the user has seen the limited support level message it is saved in the user config.
It would be better to have a system specific config section, but currently not clear
what could benefit from that.
When the platform is unsupported or has limited support a dialog box will appear including a link
to our user manual describing what to do.
**Windows**
Windows uses the MessageBox that is provided by the windows kernel.
**X11**
We use a very lowlevel messagebox for X11. It is very limited in use and can be fine tuned when needed.
**SDL/APPLE**
There is no implementation for SDL or APPLE at this moment as the platform support feature targets mostly Windows users.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5955
For many users, this will make the File Browser window behave more like
what they would expect. It addresses the issue of the File Browser
becoming hidden behind the main window by clicking anywhere in the
latter. It communicates the interruptive, but temporary nature of the
operation a bit better.
Further, on tiling window managers the File Browser now opens as
floating by default, like in other applications.
Note that this also makes sure the File Browser is always opened as
separate window, so it doesn't re-use the Preferences, or any other
temporary window anymore. This seems to have been a common annoyance.
More concretely, this makes the File Browser window behave as follows:
* Stays on top of its parent Blender window, but not on top of
non-Blender windows.
* Minimizes with its parent window
* Can be moved independently
* Doesn't add an own item in task bars
* Doesn't block other Blender windows (we may want to have this though)
* Opens as floating window for tiling window managers (e.g. i3wm/Sway)
Further notes:
* When opening a file browser from the Preference window (or any
temporary window), the main window, as the file browsers parent is
moved on top of the Preferences, which makes it seem like the
Preferences were closed. This is the general issue of bad secondary
window handling as window activation changes. I made it so that the
window is moved back once the file browser is closed.
This behavior is confusing and would be nice to avoid. It's a separate
issue though.
* On most window managers on Linux the temporary window can not be
minimized and maximized, they disable that for dialog windows.
* On Windows and macOS, only minimizing is disabled, as there is no
decent way yet to restore a window if it's not shown in the taskbar.
Reviewed By: Brecht van Lommel, Campbell Barton, William Reynish
Edits and macOS implementation by Brecht.
Differential Revision: https://developer.blender.org/D5810
Part of T69652.
There was a mix of old and new constants. Now have one list of WM_CURSOR_*
cursor types, using GHOST standard cursors when available and otherwise falling
back to our custom cursors.
Ref D5197
If the file browser was opened from an existing file browser editor
(using File -> Append would make the mouse hover the file browser in the
Shading workspace), we need special handling for closing the fullscreen
area.
This change brings back the old way of handling fullscreen closing.
Currently unused, but will allow to keep of an owner of the depsgraph.
Could also simplify other APIs in the future by avoiding to pass bmain
explicitly to relation update functions and things like that.
This is a general redesign of the File Browser GUI and interaction
methods. For screenshots, check patch D5601.
Main changes in short:
* File Browser as floating window
* New layout of regions
* Popovers for view and filter options
* Vertical list view with interactive column header
* New and updated icons
* Keymap consistency fixes
* Many tweaks and fixes to the drawing of views
----
General:
* The file browser now opens as temporary floating window. It closes on
Esc. The header is hidden then.
* When the file browser is opened as regular editor, the header remains
visible.
* All file browser regions are now defined in Python (the button
layout).
* Adjusted related operator UI names.
Keymap:
Keymap is now consistent with other list-based views in Blender, such as
the Outliner.
* Left click to select, double-click to open
* Right-click context menus
* Shift-click to fill selection
* Ctrl-click to extend selection
Operator options:
These previously overlapped with the source list, which caused numerous
issues with resizing and presenting many settings in a small panel area.
It was also generally inconsistent with Blender.
* Moved to new sidebar, which can easily be shown or hidden using a
prominent Options toggle.
* IO operators have new layouts to match this new sidebar, using
sub-panels. This will have to be committed separately (Add-on
repository).
* If operators want to show the options by default, they have the option
to do so (see `WM_FILESEL_SHOW_PROPS`, `hide_props_region`), otherwise
they are hidden by default.
General Layout:
The layout has been changed to be simpler, more standard, and fits
better in with Blender 2.8.
* More conventional layout (file path at top, file name at the bottom,
execute/cancel buttons in bottom right).
* Use of popovers to group controls, and allow for more descriptive
naming.
* Search box is always live now, just like Outliner.
Views:
* Date Modified column combines both date and time, also uses user
friendly strings for recent dates (i.e. "Yesterday", "Today").
* Details columns (file size, modification date/time) are now toggleable
for all display types, they are not hardcoded per display type.
* File sizes now show as B, KB, MB, ... rather than B, KiB, MiB, … They
are now also calculated using base 10 of course.
* Option to sort in inverse order.
Vertical List View:
* This view now used a much simpler single vertical list with columns
for information.
* Users can click on the headers of these columns to order by that
category, and click again to reverse the ordering.
Icons:
* Updated icons by Jendrzych, with better centering.
* Files and folders have new icons in Icon view.
* Both files and folders have reworked superimposed icons that show
users the file/folder type.
* 3D file documents correctly use the 3d file icon, which was unused
previously.
* Workspaces now show their icon on Link/Append - also when listed in
the Outliner.
Minor Python-API breakage:
* `bpy.types.FileSelectParams.display_type`: `LIST_SHORT` and
`LIST_LONG` are replaced by `LIST_VERTICAL` and `LIST_HORIZONTAL`.
Removes the feature where directories would automatically be created if
they are entered into the file path text button, but don't exist. We
were not sure if users use it enough to keep it. We can definitely bring
it back.
----
//Combined effort by @billreynish, @harley, @jendrzych, my university
colleague Brian Meisenheimer and myself.//
Differential Revision: https://developer.blender.org/D5601
Reviewers: Brecht, Bastien
Allow area joining even if the areas are not quite perfectly aligned.
Differential Revision: https://developer.blender.org/D5595
Reviewed by Brecht Van Lommel
Improved error handling of Join Area operator in cased it is passed cursor position that is not valid.
Differential Revision: https://developer.blender.org/D5598
Reviewed by Brecht Van Lommel
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
Adds more options to the context menu that pops up on area edges. Both Split types, Join, and Swap.
Differential Revision: https://developer.blender.org/D5459
Reviewed by Brecht Van Lommel
Fix T67008: Missing move handle and flickering in FileBrowser
Allow split regions (child regions) to contribute to the action zones (azone) of the parent region.
This fixes the issues in file browser and also in the user preferences.
Reviewers: Severin, mont29, campbellbarton
Reviewed By: Severin, mont29, campbellbarton
Subscribers: brecht, campbellbarton
Maniphest Tasks: T67008
Differential Revision: https://developer.blender.org/D5273
