The viewport cleans up old subdivision buffers right after drawing.
During rendering this was not done and when rendering many frames
this lead to memory issues.
This patch will also clear up the GPU Subdivision buffers after any
offscreen render or final render. There is already a mutex so this
is safe to be done from a non main thread.
Thanks to @kevindietrich to finding the root cause.
The modifier needs a scene camera to work. Now
if the camera is not defined, there is a warning.
The optimal solution would be to use the `isDisabled` callback
but the callback function hasn't the scene parameter and to pass
this parameter is necessary to change a lot of things and now
we are focus in the next version of GPencil 3.0 and this change
not worth the work now.
The optimal solution will be implemented in the 3.0 refactor.
Related to T102375
Reviewed by: Pablo Vazquez, Matias Mendiola
The crash happened because the geometry nodes modifier is evaluated
before the node tree has been preprocessed. While there was a transitive
but non-flushing relation between these two depsgraph nodes.
However the relation between the modifier and the `ntree_output` depsgraph
node was ignored, because it had `DEPSOP_FLAG_NEEDS_UPDATE` *not* set
(which is actually correct, because not all node tree changes change its output).
Because this relation is ignored (e.g. in `calculate_pending_parents_for_node`)
the transitive relation is ignored as well.
The solution in this patch is to explicitly add this transitive non-flushing relation
to make sure the modifier only runs after the node tree has been preprocessed,
even when the node tree output has not changed. An alternative fix could be
to handle all links always but skip the execution of depsgraph nodes that are not
needed. This way all links are always taken into account. This solution would
require some deeper changes though and would be much more risky.
Also fixes T102402.
Some of the previous commits in Wayland related code added use
of this function, but did not update the dynamic loader. This
broke compilation of configurations which use dynamic loader
for Wayland (which is the official way oh how Blender is built).
`DeviceManager.h` uses `std::string` without explicitly including
the `<string>` header. While older MSVC implicitly included this
header somewhere, the headers for 17.4+ do not leading to a build
error.
Set the created frame node to be the active node when joining nodes
with the `NODE_OT_join` operator.
This behavior was unintentonaly changed in rB545fb528d5e1 when the
operator's execute function was simplified by utilizing the node tree
topology cache.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16440
The conversion is only able to handle NURBS curves with at least three
points. This commit just avoids the crash for shorter curves. If this
ends up confusing users, an error message could be added in the future.
Properly initialize clump curve mapping tables for duplis and other cases
where this was missed by making a generic init/free function instead of
duplicating the same logic in multiple places. Also fold lattice deform
init into this.
When the materal slot index on mesh faces exceeds the number of slots, rendering
would use the last material slot while other operations like baking would fall
back to the default material.
Now consistently use the last material slot in such cases, since preserving
backwards compatibility for rendering seems most important. And if there is
one material slot, it's more useful to use that one rather than falling back
to the default material.
Correct trim for cyclical curves mentioned in T101379, splitting the
curves if the start/endpoint is at the 'loop point'.
Correct implementation based on comments in D14481, request was made to
use 'foreach_curve_by_type' to computing the point lookups.
Included corrections from D16066 as it may not be a adopted solution.
Exposed selection input by adding it as input to the node.
Note: This is disabled for 3.4 to avoid making UI changes in Bcon3.
Differential Revision: https://developer.blender.org/D16161
Replace our Noto Sans CJK with a version that has Simplified Chinese
set as the default script.
See D16426 for details and examples
Differential Revision: https://developer.blender.org/D16426
Reviewed by Brecht Van Lommel
rB67e23b4b2967 revealed the bug. But the bug already existed before,
it just wasn't triggered.
Apparently the problem happens because the python code generated in
`initGuiding()` cannot be executed twice.
The second time the `initGuiding()` code is executed, the local python
variables are removed to make way for the others, but the reference to
one of the grids in a `Solver` object (name='solver_guiding2') is still
being used somewhere. So an error is raised and a crash is forced.
The solution is to prevent the python code in `initGuiding()` from being
executed twice.
When `FLUID_DOMAIN_ACTIVE_GUIDE` is in `fds->active_fields` this
indicates that the pointer in `mPhiGuideIn` has been set and the guiding
is already computed (does not need to be computed again).
Maniphest Tasks: T102257
Differential Revision: https://developer.blender.org/D16416
The issue was introduced by the optimization of hidden objects and modifiers
in the f12f7800c2.
The solution here detects that either an object is hidden or the modifier is
disabled and does special tricks to ensure the dependencies are evaluated.
This is done by constructing a separate minimal dependency graph needed for
the object on which the modifier is being applied on. This minimal dependency
graph will not perform visibility optimization, making it so modifier
dependencies are ensured to be evaluated.
The downside of such approach is that some dependencies which are not needed
for the modifier are still evaluated. There is no currently an easy way to
avoid this. At least not without introducing possible race conditions with
other dependency graphs.
If the performance of applying modifiers in such cases becomes a problem the
possible solution would be to create a temporary object with a single modifier
so that only minimal set of dependencies is pulled in the minimal dependency
graph.
Differential Revision: https://developer.blender.org/D16421
libdecor (for window decorations) was crashing on exit with the shader
builder, avoid the crash by calling the "background" system creation
function which doesn't initialize window management under Wayland.
Re-order checks to ensure a zeroed matrix results in a quaternion
without rotation. Also avoid some redundant calculation where the
'trace' was calculated but not used, flip the scaling value early
on instead of negating the quaternion after calculating it.
This fixes a bug in the function that determines what properties to show
on the Decimate Keyframes operator.
Before the fix, the "Remove" (i.e., `factor`) slider was visible no
matter what "Mode" was being used. This meant that the slider was
visible and modifiable when it had no effect, creating confusion.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D16318
The issue was caused by refactoring, see 7afcfe111a. Function
`SEQ_transform_fix_single_image_seq_offsets` modified offsets after
handle was moved, but this was not done correctly.
Remove function mentioned above and move strip start when moving left
handle of strips that have only single frame of content by design
(image, text, color, ...).
The preferred domain is used to decide which domain the viewer node
should use when set to "Auto" domain. This commit adds it to some curve
input nodes and the curve and mesh topology nodes. This makes debugging
node setups with these nodes a bit faster and less frustrating.
The "all curve" sampling is implemented as two functions internally.
The first finds which curve each "global" sample should be on. Then
the second is the regular evaluation and sampling in that curve.
The first operations creates lengths, but they were processed as
factors when passed to the second function.
If no OPTIX_ROOT is set, nvcc fails to compile because there is a stray "-I"
in the arguments. Detect if the include path is empty and act accordingly.
Differential Revision: https://developer.blender.org/D16308
Effect strip start position was translated twice. This is caused by
recent refactoring, see 7afcfe111a.
Don't change `seq->start` of attached effect strips during translation
and only rely on `seq_time_update_effects_strip_range` function.
The node has always be a bit confusing for the NURBS case, since it
uses the distance between control points since the evaluated/control
point mapping isn't obvious, but it also went above 1, which wasn't
correct.
Instead, retrieve the total length from the point lengths calculated
in the previous step. The results should be the same for other curve
types.
The spacing and alignment of the properties in the geometry nodes
modifier could vary depending on the type of the socket or
whether the input can accept attributes.
Wrapping each property in its own `row` layout allows us to make
the spacing and alignment between them consistent.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16417
Not quite sure why {rBd37d17019c52} forcefully set the Mesh to NULL if
in editmode, but this caused the attribute lookup to fail/crash.
Now only use the attribute if we have the mesh (reducing the scope where
it is used), bmesh editmode case does not rely on it.
Maniphest Tasks: T102318
Differential Revision: https://developer.blender.org/D16406
Previously, the code would incorrectly free the passed in custom data
layer even when `CD_ASSIGN` was not used. Now the function actually
supports assigning the data to the layer. This only fixes the case for
custom data layer types that only support a single layer like `CD_MEDGE`.
Informally reviewed by Hans Goudey.
Change the behaviour of circle select on FCurves:
- Before any key is touched, the behaviour is as it was (key included in
circle-select area → select it; otherwise → select entire curve)
- If any key has been touched, an internal option
(`use_curve_selection`) is flipped and selecting the entire curve is
disallowed.
This ensures that once a key changes selection state, it's no longer
possible to select the entire curve. This allows dragging over keys and
subsequently drag over a keyless part of the curve.
Reviewed By: RiggingDojo, troopy28
Maniphest Tasks: T101894
Differential Revision: https://developer.blender.org/D16307
Rotation and scale was done around the wrong center (always around mouse
position) in paint_draw_tex_overlay [on the other hand,
paint_draw_cursor_overlay already got the center right].
Now make the center dependent on UnifiedPaintSettings "draw_anchored".
Maniphest Tasks: T102312
Differential Revision: https://developer.blender.org/D16418
The color-band needs to do some special, rather awkward updating of the
UI state when certain values are changed. As @lichtwerk noted in the
report, this was done to the wrong buttons. Now lookup the proper
buttons, and don't assume that `uiItemR()` only adds a single button
(which often isn't the case).
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Avoid accessing freed memory from dynamically allocated EnumPropertyItem
arrays. Rely on the memory being held by the iterator which isn't the
case when it was converted to a tuple.
