Similar change to the one done for tagged IDs overriding some days ago.
We do not always want to remap all local usages of a linked data-block
to its new local overriding copy.
Remove unused OBJECT_OT_mode_set_or_submode, add
OBJECT_OT_mode_set_with_submode which can switch to edit mode as well
as a sub-mode - currently only mesh select mode is supported
(others may be added later).
Part of T68836
`transform conversions.c` is a file that is getting too big (almost 10,000 lines).
So it's a good idea to split it into smaller files.
differential revision: https://developer.blender.org/D5677
When click-dragging to change values in textures (for example Musgrave-
>Size to give an example) the step size is too big.
Reviewers: brecht, lichtwerk
Reviewed By: brecht, lichtwerk
Differential Revision: https://developer.blender.org/D5661
Was always evaluating due to typo in rB34ab90f546f0.
Reviewers: brecht
Maniphest Tasks: T68840
Differential Revision: https://developer.blender.org/D5695
It is possible that POST callbacks will modify objects or relations.
This change makes it so an extra update pass is done if needed.
Reviewers: brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5690
The operator set as active object material the material used in the selected stroke.
Access to the operator were added in the stroke menu and context stroke menu.
Reviewers: antoniov, pepeland
Tags: #bf_blender, #grease_pencil
Differential Revision: https://developer.blender.org/D5692
setting/clearing render region uses ND_RENDER_OPTIONS notifier, but
listener was only refreshing RENDER and VIEWLAYER tabs in that case,
whereas the render region buttons are located in OUTPUT tab.
Reviewers: billreynish
Maniphest Tasks: T69522
Differential Revision: https://developer.blender.org/D5685
I believed the crash I experienced happened because:
1. The `extract_pos_nor_init` function is called.
2. Tasks are added to the task pool for `extract_pos_nor`.
3. The tasks begin to be executed while more tasks are added.
4. In some rare cases, all existing tasks are finished, but not all have been added yet.
5. This let the task-counter go down to zero.
6. This triggered a call to `extract_pos_nor_finish`.
7. Then more tasks are added and in the end `extract_pos_nor_finish` is called again.
A solution is to use a task pool that is suspended when created.
Unfortunately, there was an outdated comment, that was probably the root cause of the issue.
Reviewers: fclem, sergey
Differential Revision: https://developer.blender.org/D5680
This patch rewrites the Mapping node to support dynamic inputs. The
Max and Min options have been removed. They can be added as Min and
Max Vector Math nodes manually.
Texture nodes still use the old matrix-based mapping. A new SVM node
`NODE_TEXTURE_MAPPING` has been added to preserve this functionality.
Similarly, in GLSL, a `mapping_mat4` function has been added.
Reviewers: brecht, JacquesLucke
New icons from Andrzej Ambroż (jendrzych)
- Many tweaks to existing icons, such as folders and drives for the new file browser, as well as snapping
- New icons for Checkmark, Transform Origins, Snap to Face Center, Zip Files (currently unused)
This was removed in rB0666ece2e2f9 because it is handled differently for
"real" cloth in cloth_solve_collisions(), but hair still needs this
apparently [does its thing in cloth_continuum_step() instead].
And since we have a default 'Quality Steps' setting of 5, it made many
simulations unstable.
Fixes T65038, T59742 (possibly others)
Reviewers: brecht
Maniphest Tasks: T65038, T59742
Differential Revision: https://developer.blender.org/D5681
This patch extends perlin noise to operate in 1D, 2D, 3D, and 4D
space. The noise code has also been refactored to be more readable.
The Color output and distortion patterns changed, so this patch
breaks backward compatibility. This is due to the fact that we
now use random offsets as noise seeds, as opposed to swizzling
and constants offsets.
Reviewers: brecht, JacquesLucke
Differential Revision: https://developer.blender.org/D5560
We moved this to Python too quickly, causing the following regressions:
* No auto completion for file names
* Additional handling not applied on changes, like automatic extension
appending (see file_filename_enter_handle)
* Red highlight missing when the file name already exists
Note that earlier (before the file browser redesign), this didn't use
the panel and layout code at all. So even if it's still not in Python,
at least it's integrated into regular panel management now.
OS-specific ordering of the open and cancel button is kept.
Fixes T69457.
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
As an inherent property of matrix-based transformation math, non-
uniform scaling of a parent bone induces shear into the transform
matrix of any rotated child. Such matrices cannot be cleanly
decomposed into a combination of location/rotation/scale, which
causes issues for rigging and animation tools.
Blender bones have options to exclude rotation and/or scale from the
inherited transformation, but don't have any support for removing the
often undesired shear component. That goal requires replacing simple
parenting with a combination of multiple bones and constraints. The
same is true about the goal of inheriting some scale, but completely
avoiding shear.
This patch replaces the old Inherit Scale checkbox with a enum that
supports multiple options:
* Full: inherit all effects of scale, like with enabled Inherit Scale.
* Fix Shear: removes shear from the final inherited transformation.
The cleanup math is specifically designed to preserve the main
axis of the bone, its length and total volume, and minimally
affect roll on average. It however will not prevent reappearance
of shear due to local rotation of the child or its children.
* Average: inherit uniform scale that represents the parent volume.
This is the simplest foolproof solution that will inherit some
scale without ever causing shear.
* None: completely remove scale and shear.
* None (Legacy): old disabled Inherit Scale checkbox.
This mode does not handle parent shear in any way, so the child
is likely to end up having both scale and shear. It is retained
for backward compatibility.
Since many rigging-related addons access the use_inherit_scale
property from Python, it is retained as a backward compatibility
stub that provides the old functionality.
As a side effect of reworking the code, this also fixes a matrix
multiplication order bug in the Inherit Rotation code, which caused
the parent local scale to be applied in world space. In rigger
opinion this option is useless in production rigs, so this fix
should not be a problem.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5588
Support for UV Stretching overlay during multi object editing. The
VBO now holds the ratios per fase. In the shader these ratios will
be compared against the global ratios. The global rations are created
from all selected objects.
The current implementation does not fit well with the draw module. The
plan is to move the drawing of other spaces towards the draw manager what
leads to a better fit. Currently the details on this solution is unclear
but this requirement will become an attentionpoint in the future design.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5665
Instead use vertical cursor motion for Y axis shear.
This removes the shear_axis option completely since we now have two
axis options used by shear it's not needed.
E.g. box selecting wouldn't allow selecting the first file.
Work selection and shift/ctrl selection had similar issues.
Code assumed that the first item was the '..' parent item and manually
removed it from the selection. I could just remove this special
handling, but instead I made the behavior more dynamic. So the file list
checks if the '..' item is there and only then applies special
treatment.
That way we can easily bring the '..' item back or make it optional if
wanted.
When select a layer in Dopesheet, the autolock layer was not working.
Now the Dopesheet code calls the function for autolock. Also some code cleanup to move the logic to new function.
In order to correctly drive corrective shape keys from a freely
rotating organic joint it is very often found necessary to
decompose the rotation into separate bending and twisting
motions. This type of decomposition cannot be reproduced by
any Euler order or a single quaternion.
Instead this is done by using a helper bone with a Damped Track
constraint aimed at the tail of the control to pick up the bending,
and its helper child with Copy Transforms to separate the twist.
Requiring two additional bones to drive a shape key or a correction
bone seems inconvenient, so this implements the necessary math as new
options in the recently introduced Rotation Mode dropdown of the
Transform Channel driver variable type. The data is also accessible
as a Transformation constraint input.
The output is in the form of Quaternion-derived 'pseudo-angles',
which for `Swing and Y Twist` would represent the following:
* W: true bend angle, independent of bend direction.
* Y: true twist angle.
* X, Z: pseudo-angles representing the proportion of bending around X/Z.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5651
