Instead of the monolothic `depsgraph_type.hh` header that includes
most types used in the despgraph, just add includes where they are
actually necessary. Also remove the `using` keywords for `std` types.
The lack of specificity isn't considered good practice nowadays.
Removing unnecessary transitive includes can help improve compile
times because the time spent parsing headers decreases. Using the
"include what you use" pattern makes futher improvements much
easier too, since it the path to further reduce transitive includes
becomes much clearer.
Pull Request: https://projects.blender.org/blender/blender/pulls/133749
When duplicating an action, it is stashed in the NLA on a muted track.
Over time this can slow down blender, because certain code will look at every
FCurve in every action in the NLA.
To fix the performance issue, we can take advantage of the fact that
stashed actions are put onto a muted NLA track.
With this patch any strip on a muted NLA track is ignored in the
Depsgraph evaluation.
Measurements of `DEG_graph_relations_update`
| - | Before | After |
| - | - | - |
| 50 actions | ~140 ms | ~10.0 ms |
| 100 actions | ~250 ms | ~10.7 ms |
Pull Request: https://projects.blender.org/blender/blender/pulls/133864
The recent addition of DEG_disable_visibility_optimization in #133358
almost fixed this, but it was not fully working. By ensuring objects
are evaluated we avoid modifying original objects.
If for some reason (like a Python handler) the object is still missing,
report an error in the bake operator.
Pull Request: https://projects.blender.org/blender/blender/pulls/133439
This uses the following accessor methods in more places in more places:
`is_group()`, `is_group_input()`, `is_group_output()`, `is_muted()`,
`is_frame()` and `is_reroute()`.
This results in simpler code and reduces the use of `bNode.type_legacy`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132899
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
This renames the struct `Sequence` to `Strip`.
While the motivation for this partially comes from
the "Sequence Design" #131329, it seems like this
is a good refactor whether the design gets implemented
or not.
The `Sequence` represents what users see as strips in the
VSE. Many places in the code already refere to a `Sequence`
as "strip". It's the C-style "base class" of all strip types.
This also renames the python RNA type `bpy.types.Sequence`
to `bpy.types.Strip` which means that this technically breaks
the python API.
Pull Request: https://projects.blender.org/blender/blender/pulls/132179
This caused build errors on the docs builder, I can't seem to reproduce
locally, so revert for now and have another look at some point in the
future.
Sadly as these changes usually go, this took 5c515e26bb and
2f0fc7fc9f with it as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/132559
- All movie related public headers now have MOV_ prefix instead of
IMB_movie_.
- All movie related public functions now have MOV_ prefix as well,
instead of IMB_movie_ or IMB_anim_.
- IMB_anim.hh -> MOV_read.hh (also ImBufAnim -> MovieReader), and
various utility functions not related to playback were split off
into MOV_util.hh.
- Other function name tweaks for clarity, e.g. IMB_suffix_anim
-> MOV_set_multiview_suffix and so on.
- All except one usages of MOV_get_fps (nee IMB_anim_get_fps) were
ultimately just converting returned value into a float. So make
MOV_get_fps just return that directly. For the (exactly just one)
place that needs numerator and denominator, have
MOV_get_fps_num_denom.
- Code comments on the public header functions.
- Removed never-used code paths inside movie timecode proxy building
file.
It might be easier to review each commit separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/132145
Previously, calling `clear()` on `Map`, `Set` or `VectorSet` would remove all
elements but did not free the already allocated capacity. This is fine in most
cases, but has very bad and non-obvious worst-case behavior as can be seen in
#131793. The issue is that having a huge hash table with only very few elements
is inefficient when having to iterate over it (e.g. when clearing).
There used to be a `clear_and_shrink()` method to avoid this worst-case
behavior. However, it's not obvious that this should be used to improve
performance.
This patch changes the behavior of `clear` to what `clear_and_shrink` did before
to avoid accidentally running in worst-case behavior. The old behavior is still
available with the name `clear_and_keep_capacity`. This is more efficient if
it's known that the hash-table is filled with approximately the same number of
elements or more again.
The main annoying aspect from an API perspective is that for `Vector`, the
default behavior of `clear` is and should stay to not free the memory. `Vector`
does not have the same worst-case behavior when there is a lot of unused
capacity (besides taking up memory), because the extra memory is never looked
at. `std::vector::clear` also does not free the memory, so that's the expected
behavior. While this patch introduces an inconsistency between `Vector` and
`Map/Set/VectorSet` with regards to freeing memory, it makes them more
consistent in that `clear` is the better default when reusing the data-structure
repeatedly.
I went over existing uses of `clear` to see if any of them should be changed to
`clear_and_keep_capacity`. None of them seemed to really benefit from that or
showed that it was impossible to get into the worst-case scenario. Therefore,
this patch slightly changes the behavior of these calls (only performance wise,
semantics are exactly the same).
Pull Request: https://projects.blender.org/blender/blender/pulls/131852
Give the `IDWALK_CB_…` enum an explicit name:
`LibraryForeachIDCallbackFlag`. This way the flags are type-safe, and
it's known where values come from. This is much preferred (at least by
me) to just having `int flags`.
Uses of `0` have been replaced with `IDWALK_CB_NOP` as that has the same
value and is of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int` though.
No functional changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/131865
Two commits that basically do the same thing for two `enum`s: give
them a name.
- the `IDWALK_…` enum → `LibraryForeachIDFlag`.
- the `IDWALK_CB_…` enum → `LibraryForeachIDCallbackFlag`.
This way the flags are type-safe, and it's known where values come
from. This is much preferred (at least by me) to just having `int
flags`.
Uses of `0` have been replaced with `IDWALK_NOP` and `IDWALK_CB_NOP`,
as those have the same value and are of the right type.
One invalid use of `IDWALK_NOP` was detected by this change, and is
replaced by `IDWALK_CB_NOP`. And another one in the opposite
direction.
This change might be incomplete; I gave the enum a name, fixed the
compiler errors, and then also updated assignments like `int cb_flag =
cb_data->cb_flag`. I might have missed some assignments to `int`
though.
No functional changes.
----------
I intend to land this PR as its two separate commits. I just put them in the same PR so the buildbot can handle them in one go, and we don't have a stack of highly relatled PRs.
In the future this could also apply to the `IDWALK_RET_…` enum. This one I left out, though, because a proper cleanup there would also have to include their ambiguity on whether they are bitflags (like the enums in this PR) or not. Their values and the code in `BKE_lib_query_foreachid_process()` implies they are bitflags, but in practice they are never or'ed together and just used as discrete values.
Pull Request: https://projects.blender.org/blender/blender/pulls/131803
Move `CD_CUSTOMLOOPNORMAL` to the newly added
`CD_PROP_INT16_2D` generic attribute type. This is similar to
previous commits moving specific custom data types.
The attribute name is `custom_normal`. When the attribute with
that name is on the face corner domain, the code will interpret it
as stored in the existing deformation-invariant spherical coordinate
space.
The API remains the same, with the additional opportunity to edit
custom normal data as an attribute directly (which admittedly is fairly
unintuitive currently).
See #130484.
Pull Request: https://projects.blender.org/blender/blender/pulls/130689
We've had a bunch of inconsistency between `channel_bag` and `channelbag` in the
code base. After discussion with @dr.sybren, we decided to standardize on
`channelbag` and also rename the camelcase `ChannelBag` to `Channelbag` to be
consistent with that.
This PR implements those changes.
Note that the reason we standardized on `channelbag` rather than `channel_bag`
is because it makes things clearer when stringing multiple terms together in
type and function names. For example, in `channelbag_fcurves_move()` it makes
it clear that `channelbag` describes one thing, rather than `channel` and `bag`
being two separate things.
No functional changes intended.
Pull Request: https://projects.blender.org/blender/blender/pulls/130988
These are converted on startup to the new type. There are still
some references left, mostly where it looked like there still needs
to be changes to properly deal with the new object type.
NOTE: This also required some changes to Cycles code itself, who is now
directly including `BKE_image.hh` instead of declaring a few prototypes
of these functions in its `blender/utils.h` header (due to C++ functions
names mangling, this was not working anymore).
Pull Request: https://projects.blender.org/blender/blender/pulls/130174
For C/C++ doc-strings should be located in headers,
move function comments into the headers, in some cases merging
with existing doc-strings, in other cases, moving implementation
notes into the function body.
Line art uses `DEG_OBJECT_ITER_BEGIN` to load all objects that has a
geometry in the scene, which is kind of a hack since the beginning. This
left potential problem where the iterator could go through some objects
that line art didn't have a dependency on (e.g. other grease pencil
objects):
- Since those "other" objects often evaluates fast enough, so
line art always end up having valid data from everywhere after lengthy
mesh evaluation prior to itself, so this problem was not prominent.
- However, in rare cases, there are other objects that takes a lot of
time to evaluate, this causes line art to potentially iterate to objects
that are still invalid.
This fix will build a `Vector<Object *>` during `update_depsgraph`, and
use such list inside `DEGObjectIterSettings` to filter out objects that
the modifier isn't dependent on, thus remove the possibility of reading
objects that hasn't been evaluated.
Since Line art will not add grease pencil objects as potential geometry
inputs, all mesh/curve types of geometries generated by geometry nodes
modifier directly inside other grease pencil objects won't be loaded.
This can be mitigated by having a third mesh object that reads the
result from the grease pencil object that generates geometries, then
directly output them for line art to read.
This also fixes#128888.
Pull Request: https://projects.blender.org/blender/blender/pulls/128890
This commit takes the 'Slotted Actions' out of the experimental phase.
As a result:
- All newly created Actions will be slotted Actions.
- Legacy Actions loaded from disk will be versioned to slotted Actions.
- The new Python API for slots, layers, strips, and channel bags is
available.
- The legacy Python API for accessing F-Curves and Action Groups is
still available, and will operate on the F-Curves/Groups for the first
slot only.
- Creating an Action by keying (via the UI, operators, or the
`rna_struct.keyframe_insert` function) will try and share Actions
between related data-blocks. See !126655 for more info about this.
- Assigning an Action to a data-block will auto-assign a suitable Action
Slot. The logic for this is described below. However, There are cases
where this does _not_ automatically assign a slot, and thus the Action
will effectively _not_ animate the data-block. Effort has been spent
to make Action selection work both reliably for Blender users as well
as keep the behaviour the same for Python scripts. Where these two
goals did not converge, reliability and understandability for users
was prioritised.
Auto-selection of the Action Slot upon assigning the Action works as
follows. The first rule to find a slot wins.
1. The data-block remembers the slot name that was last assigned. If the
newly assigned Action has a slot with that name, it is chosen.
2. If the Action has a slot with the same name as the data-block, it is
chosen.
3. If the Action has only one slot, and it has never been assigned to
anything, it is chosen.
4. If the Action is assigned to an NLA strip or an Action constraint,
and the Action has a single slot, and that slot has a suitable ID
type, it is chosen.
This last step is what I was referring to with "Where these two goals
did not converge, reliability and understandability for users was
prioritised." For regular Action assignments (like via the Action
selectors in the Properties editor) this rule doesn't apply, even though
with legacy Actions the final state ("it is animated by this Action")
differs from the final state with slotted Actions ("it has no slot so is
not animated"). This is done to support the following workflow:
- Create an Action by animating Cube.
- In order to animate Suzanne with that same Action, assign the Action
to Suzanne.
- Start keying Suzanne. This auto-creates and auto-assigns a new slot
for Suzanne.
If rule 4. above would apply in this case, the 2nd step would
automatically select the Cube slot for Suzanne as well, which would
immediately overwrite Suzanne's properties with the Cube animation.
Technically, this commit:
- removes the `WITH_ANIM_BAKLAVA` build flag,
- removes the `use_animation_baklava` experimental flag in preferences,
- updates the code to properly deal with the fact that empty Actions are
now always considered slotted/layered Actions (instead of that relying
on the user preference).
Note that 'slotted Actions' and 'layered Actions' are the exact same
thing, just focusing on different aspects (slot & layers) of the new
data model.
The "Baklava phase 1" assumptions are still asserted. This means that:
- an Action can have zero or one layer,
- that layer can have zero or one strip,
- that strip must be of type 'keyframe' and be infinite with zero
offset.
The code to handle legacy Actions is NOT removed in this commit. It will
be removed later. For now it's likely better to keep it around as
reference to the old behaviour in order to aid in some inevitable
bugfixing.
Ref: #120406
Removes unused GPv2 functions in blenkernel.
Notes:
- Functions for layer masks are still in use, but annotations never
have layer masks in the first place. Would be good to remove the data
structures so we can remove the functions too.
- Some multi-frame edit functions are also still nominally used, but
multi-frame editing is not an active feature for annotations. This
should also be removed.
Pull Request: https://projects.blender.org/blender/blender/pulls/128709
It is possible to have IK solver without actual bones. There was a relation
created for this case, but it was originating from a wrong operation: it
was possible to run into situation when init is not yet done, but cleanup
is already run.
Fix the relation which ensures the order to go from IK initialization and
not the pose initialization. This should ensure proper cleanup order.
There is a relation from pose initialization to IK initialization so this
change should not cause any missing relations.
This should fix the intermittent failure of blendfile_versioning_1_over_8.
Pull Request: https://projects.blender.org/blender/blender/pulls/128267
This updates the layered action data model to store strip data differently. Specifically:
- `Strip` is now just a single, POD type that only stores the data common to all
strips, such as start/end frames.
- The data that might be of a completely different nature between strips (e.g.
keyframe data vs modifier data) is now stored in arrays on the action itself.
- `Strip`s indicate their type with an enum, and specify their data with an
index into the array on the action that stores data for that type.
This approach requires a little more data juggling, but has the advantage of
making `Strip`s themselves super simple POD types, and also opening the door to
trivial strip instancing later on: instances are just strips that point at the
same data.
The intention is that the RNA API remains the same: from RNA's perspective there
is no data storage separate from the strips, and a strip's data is presented as
fields and methods directly on the strip itself. Different strip types will be
presented as different subtypes of `ActionStrip`, each with their own fields and
methods specific to their underlying data's type. However, this PR doesn't
implement that sub-typing, leaving it for a future PR. It does, however, put the
fields and methods of the one strip type we have so far directly on the strip,
which avoids changing the APIs we have so far.
This PR implements the bulk of this new approach, and everything should be
functional and working correctly. However, there are two TODO items left over
that will be implemented in forthcoming PRs:
- Type refinement in the RNA api. This PR actually removes the existing type
refinement code that was implemented in terms of the inheritance tree of the
actual C++ types, and this will need to be reimplemented in terms of the new
data model. The RNA API still works without the type refinement since there
are only keyframe strips right now, but it will be needed in preparation for
more strip types down the road.
- Strip data deletion. This PR only deletes data from the strip data arrays when
the whole action is deleted, and otherwise just accumulates strip data as more
and more strips are added, never removing the data when the corresponding
strips get removed. That's fine in the short term, especially since we only
support single strips right now. But it does need to be implemented in
preparation for proper layered actions.
Pull Request: https://projects.blender.org/blender/blender/pulls/126559
This allows building tools that simplify Blender core development.
The depsgraph already exposed the dot graph using the `debug_relations_graphviz`
method. This has been extended to return the data as a string. The filepath is
optional now.
Similar functions have been added for node trees. Note that these should be used
on evaluated node trees.
Add support for slotted Actions to the NLA evaluation code.
This also affects the pose library code and the Action Constraint. These
both share some Action evaluation logic with the NLA. They now
explicitly looks at only the first Action slot. The Action Constraint will
have to be updated to have an explicit slot selector, but that's for another
commit.
Pull Request: https://projects.blender.org/blender/blender/pulls/127425
The issue is due to a dependency cycle which leads to access of data
which is not ready yet.
The dependency cycle was introduced in ada367a0e9.
This change makes it so there is no dependency cycle in the setup from
the report by re-routing dependencies a bit: the light linking now
bypasses the geometry component and is only wired to an operation
related on instancing collection (but not use by a boolean modifier).
Pull Request: https://projects.blender.org/blender/blender/pulls/127143
