This was caused by 3dfec1ff73
which introduce the new behavior. This was to fix workflows
using a lot of semi-transparent objects which made nagivation
difficult.
This patch first roll back to the previous behavior: The
unselectable object will affect depth-aware operators.
This patch introduces a new visibility property to remove
the influence of objects in all depth picking operations
and selection operations. However the object is still
selectable through non-drawing selection operators
(e.g. select by material) and through the outliner.
This is to adress the aforementionned navigation issues.
Pull Request: https://projects.blender.org/blender/blender/pulls/146706
Adding panel toggles in nodegroups have somewhat of a UX antipattern. When
running the operator, it checks for conditions that indicate it should not run,
and if those are hit, it cancels execution and mentions the invalid condition in
the footer bar.
This is not ideal, the user should not have to call the operator to find out
whether it can be called.
Why it got implemented like this is likely a consequence of all interface items
being the same "New Item" operator. Poll functions cannot use operator
properties, so variants of the same operator cannot check for different
conditions for execution.
This is a problem for panel toggles, as they have more restrictions to when they
can be added that don't apply to other interface items.
This patch creates a separate operator for adding panel toggles. This allows the
condition checks to be implemented in the poll function, which enables greying
out the operator buttons and showing on tooltips what condition is invalid.
Pull Request: https://projects.blender.org/blender/blender/pulls/146379
Instead of always resetting the 'standard' transform, only reset those
array elements that were actually animated (and whose animation has
thus been transfered to the corresponding 'delta' transform).
This approach also has the advantage of using the defaults from RNA,
rather than hard-coding defaults based on the property name.
Pull Request: https://projects.blender.org/blender/blender/pulls/147982
Rename modules in `./scripts/modules/` to use an underscore prefix to
make it clear they aren't intended to be part of public API's. This
also means there is no implication that these modules should be stable,
allowing us to change them based on Blender's internal usage.
The following modules have been marked as private:
- `animsys_refactor`
- `bl_console_utils`
- `bl_i18n_utils`
- `bl_previews_utils`
- `bl_rna_utils`
- `bl_text_utils`
- `bl_ui_utils`
- `bpy_restrict_state`
- `console_python`
- `console_shell`
- `graphviz_export`
- `keyingsets_utils`
- `rna_info`
- `rna_manual_reference`
- `rna_xml`
Note that we could further re-arrange these modules
(under `_bpy_internal` in some cases), this change is mainly to mark
them as private, further changes can be handed on a case-by-case basis.
Ref !147773
We have icons that represent specific individual collections. like
Icon_Outliner_Collection for a default (uncolored) collection, and
Icon_Collection_color_x for ones with colors. For "collections" as a
general thing though we have icon_group. Sometimes we confuse the two,
for example the list of tabs to show in Properties uses a different
icon than the actual category icon. This PR fixes the complaint by
using the correct icon for each of these purposes.
Pull Request: https://projects.blender.org/blender/blender/pulls/147942
The Grease Pencil operator for changing the Opacity of selected strokes
was missing from the transform menu, which is the where the `Radius`
operator lives.
This prevented the operator from being searched.
4.5 backport candidate.
Pull Request: https://projects.blender.org/blender/blender/pulls/147672
This patch shows the start and end frames of the Movie Clip in its UI
template, which is now shown in the compositor node N-panel and camera
background image
Pull Request: https://projects.blender.org/blender/blender/pulls/145541
The Radial Tilling node crashes in the compositor in GPU mode. This is
because the compositor does not yet support 2D vectors in shader code
generation, but properly supports and expects them in the interface,
which the Radial Tilling node declares. This results in a bad shader
which crashes Blender.
To properly fix this, we need to:
- Support 2D vectors in compositor GPU material shader code generation.
- Support 2D vectors in shader node GPU stack construction.
- Adjust the interface of radial tilling to actually use 2D vectors.
This seems risky for 5.0, so this patch temporarily drops support for
the node in the compositor in 5.0. Then once 2D vectors are supported,
it can be enabled again.
Pull Request: https://projects.blender.org/blender/blender/pulls/147627
Since the introduction of the sequencer scene,
some of the sequencer python operators have
been using `context.scene` when they should be using
`context.workspace.sequencer_scene`.
This fixes `SequencerFadesAdd`, `SequencerFadesClear`,
`SequencerDeinterlaceSelectedMovies`,
`SequencerSplitMulticam`, and `SequencerCrossfadeSounds`.
Pull Request: https://projects.blender.org/blender/blender/pulls/147560
In 2a1a658492, layout functions for nodes were refactored and new
methods were introduced, but this change was not applied to the
translation extraction script.
This commit adds these method names and argument order to Python
extraction: "node_operator", "node_operator_with_outputs",
"simulation_zone", "repeat_zone", "for_each_element_zone",
"closure_zone".
Tooltips specified in a special structure are manually extracted using
`n_()`.
Actual translation is done manually in the UI methods inside NodeMenu,
in order to override the context, which by default would have been
"Operator".
Reported by Ye Gui in #43295.
Pull Request: https://projects.blender.org/blender/blender/pulls/147582
Remove access to the clipboard from the Paste Global Transform operator
poll function, as it can cause slowdowns when there is a lot of data on
the clipboard.
This also means that the parsing code has to be a bit more lenient to the
contents of the clipboard. And, because the error message that there is
no matrix on the clipboard is now going to be shown more often, I made it
a bit more friendly.
Pull Request: https://projects.blender.org/blender/blender/pulls/147562
This adds unobtrusive tab button for selecting displayed tabs to the
tabs region. The idea is, that this way, the filter is much more
discoverable than it being hidden in options popover. The button is
grayed out, when all tabs are visible.
To only draw arrow, is achieved by setting `UILayout.emboss` to `NONE`
or `NONE_OR_STATUS`
Pull Request: https://projects.blender.org/blender/blender/pulls/135132
We have icons that represent specific individual collections. like
Icon_Outliner_Collection for a default (uncolored) collection, and
Icon_Collection_color_x for ones with colors. For "collections" as a
general thing though we have icon_group. Sometimes we confuse the two,
for example the list of tabs to show in Properties uses a different
icon than the actual category icon. This PR fixes the complaint by
using the correct icon for each of these purposes.
Pull Request: https://projects.blender.org/blender/blender/pulls/147652
Previously items in the "Group" list would usually show up first because
their menu path is shorter. Now, adjust their search weight so they show
up lower than the corresponding asset. That this is just a heuristic,
because we don't have a good way to directly deduplicate groups
that are just packed assets in the add menu currently.
Pull Request: https://projects.blender.org/blender/blender/pulls/147629
Addresses #146305.
Ever since moving to the "sequencer scene" paradigm, attempting to
render an image or animation when a sequencer with strips is present
often seems to outright ignore the sequencer in most cases. This is
because the sequencer scene usually differs from the active scene (which
is the true render target), so one must first switch their active scene
to the sequencer scene before rendering. This is confusing and
seems like a regression in behavior. To improve clarity, this patch does
the following:
When a sequencer scene with at least one strip (and the sequencer step
enabled in the pipeline) exists in the current workspace, new options
"Render Sequencer Image" and "Render Sequencer Animation" appear. These
options may be invoked by alt-F12 and ctrl-alt-F12, respectively.
Additionally, if such a valid sequencer scene is the same as the active
scene, then only the regular render options are listed, since in this
case they are identical to the sequencer render operators, meaning F12
still works predictably.
To switch back and forth between sequencer and main scene render
outputs, a new toggle has been added to the image editor to "Show
Sequencer Scene" output. This button only appears for the render result
if there is a valid sequencer scene that differs from the active scene.
Pull Request: https://projects.blender.org/blender/blender/pulls/146934
