Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
While these warnings point to real errors in the code,
PyMethodDef are an exception where functions with different numbers
of arguments are all cast to the same function type.
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
This function replaced the evaluated mesh with a new one with the given
custom data type mask. That doesn't work in general anymore for a few
reasons: the increased dependence on named attributes (a opposed to
custom data types), and the "all or nothing" approach to reevaluating
the depsgraph. Other objects might depend on the object's evaluated
geometry, so it shouldn't just be replaced. Pushed a bit further, this could
give nice simplifications to mesh modifier evaluation.
There are two breaking changes, `bmesh_from_object` and BVH tree
`FromObject` require the source object to have a proper evaluated
mesh now.
If this causes a regression, it's likely that the object is missing
an update tag when a mode is entered that requires extra evaluated data.
Pull Request: https://projects.blender.org/blender/blender/pulls/106186
- "... (matches pythons ...)": capitalize and use possessive ('s).
- "Layer Proxy Protection": replace proxy by override, following 2.80.
- "Enable Plane Trim": expand description.
- "Make curve path children to rotate along the path": remove "to".
- "Option for curve-deform: make deformed child to stretch along
entire path": remove "to".
- "... apply the curve radius with path following it and deforming":
rephrase unclear description.
- "Custom light falloff curve" : unrelated to lights, used in Grease
Pencil modifiers.
- "Grease Pencil layer assigned to the generated strokes": rephrase
because a GP stroke is assigned to a layer, not the other way
around.
- "Attribute domain where the attribute domain is stored in the
simulation state": remove second "domain" (typo).
Pull Request: https://projects.blender.org/blender/blender/pulls/107916
For derived mesh triangulation information, currently the three face
corner indices are stored in the same struct as index of the mesh
polygon the triangle is part of. While those pieces of information are
often used together, they often aren't, and combining them prevents
the indices from being used with generic utilities. It also means that
1/3 more memory has to be written when recalculating the triangulation
after deforming the mesh, and that the entire triangle data has to be
read when only the polygon indices are needed.
This commit splits the polygon index into a separate cache on `Mesh`.
The triangulation data isn't saved to files, so this doesn't affect
.blend files at all.
In a simple test deforming a mesh with geometry nodes, the time used
to recalculate the triangulation reduced from 2.0 ms to 1.6 ms,
increasing overall FPS from 14.6 to 15.
Pull Request: https://projects.blender.org/blender/blender/pulls/106774
In some cases comments at the end of control statements were wrapped
onto new lines which made it read as if they applied to the next line
instead of the (now) previous line.
Relocate comments to the previous line or in some cases the end of the
line (before the brace) to avoid confusion.
Note that in quite a few cases these blocks didn't read well
even before MultiLine was used as comments after the brace caused
wrapping across multiple lines in a way that didn't follow
formatting used everywhere else.
Implements #102359.
Split the `MLoop` struct into two separate integer arrays called
`corner_verts` and `corner_edges`, referring to the vertex each corner
is attached to and the next edge around the face at each corner. These
arrays can be sliced to give access to the edges or vertices in a face.
Then they are often referred to as "poly_verts" or "poly_edges".
The main benefits are halving the necessary memory bandwidth when only
one array is used and simplifications from using regular integer indices
instead of a special-purpose struct.
The commit also starts a renaming from "loop" to "corner" in mesh code.
Like the other mesh struct of array refactors, forward compatibility is
kept by writing files with the older format. This will be done until 4.0
to ease the transition process.
Looking at a small portion of the patch should give a good impression
for the rest of the changes. I tried to make the changes as small as
possible so it's easy to tell the correctness from the diff. Though I
found Blender developers have been very inventive over the last decade
when finding different ways to loop over the corners in a face.
For performance, nearly every piece of code that deals with `Mesh` is
slightly impacted. Any algorithm that is memory bottle-necked should
see an improvement. For example, here is a comparison of interpolating
a vertex float attribute to face corners (Ryzen 3700x):
**Before** (Average: 3.7 ms, Min: 3.4 ms)
```
threading::parallel_for(loops.index_range(), 4096, [&](IndexRange range) {
for (const int64_t i : range) {
dst[i] = src[loops[i].v];
}
});
```
**After** (Average: 2.9 ms, Min: 2.6 ms)
```
array_utils::gather(src, corner_verts, dst);
```
That's an improvement of 28% to the average timings, and it's also a
simplification, since an index-based routine can be used instead.
For more examples using the new arrays, see the design task.
Pull Request: https://projects.blender.org/blender/blender/pulls/104424
Refactoring mesh code, it has become clear that local cleanups and
simplifications are limited by the need to keep a C public API for
mesh functions. This change makes code more obvious and makes further
refactoring much easier.
- Add a new `BKE_mesh.hh` header for a C++ only mesh API
- Introduce a new `blender::bke::mesh` namespace, documented here:
https://wiki.blender.org/wiki/Source/Objects/Mesh#Namespaces
- Move some functions to the new namespace, cleaning up their arguments
- Move code to `Array` and `float3` where necessary to use the new API
- Define existing inline mesh data access functions to the new header
- Keep some C API functions where necessary because of RNA
- Move all C++ files to use the new header, which includes the old one
In the future it may make sense to split up `BKE_mesh.hh` more, but for
now keeping the same name as the existing header keeps things simple.
Pull Request: https://projects.blender.org/blender/blender/pulls/105416
