Should be no visible change on user side.
Preparing for render parts removal as part of Cycles X project.
Differential Revision: https://developer.blender.org/D12317
I think there are the following issues with {rB5fa6cdb77a98}:
- if we introduce a PROP_UNIT_TIME_ABSOLUTE unit, shouldnt it be visible
to RNA as well?
- seems like a double entry sneaked into that commit?
This is in preparation to use this for render time limit in cycles-x.
ref. T90701
Maniphest Tasks: T90701
Differential Revision: https://developer.blender.org/D12315
Before, distances from each component were handled in the same loop,
making it more complicated to add support for more component types
in the future (and probably hurting performance by dealing with two
BVH trees at the same time, though I didn't test that).
Now each component is handled in a separate function, so that adding
support for another component type is much simpler.
Remove redundant code for drawing text strings that contain only ASCII.
See D12293 for much more detail.
Differential Revision: https://developer.blender.org/D12293
Reviewed by Campbell Barton
The code assumed that when a node group is is at the highest
level in the node editor, then it is embedded into another data
block and can't be referenced by other node groups. This is true
for shader and compositor nodes, but not for geometry nodes.
We now use a for_each function with callback to iterate through all sequences in the scene.
This has the benefit that we now only loop over the sequences in the scene once.
Before we would loop over them twice and allocate memory to store temporary data.
The allocation of temporary data lead to unintentional memory leaks if the code used returns to exit out of the iteration loop.
The new for_each callback method doesn't allocate any temporary data and only iterates though all sequences once.
Reviewed By: Richard Antalik, Bastien Montagne
Differential Revision: http://developer.blender.org/D12278
Previously when loading an thumbnails for an asset the whole file was
read. Reason this was done was perhaps a future idea to load
all thumbnails inside a blendfile in a single go. This was never implemented
and currently unneeded disk and cpu cycles was spend with finding out what
preview to load.
This patch adds an early break when the thumbnail that the caller is
interested in has been found. This improves the thumbnail extraction
when looking into large files.
Reviewed By: mont29
Maniphest Tasks: T90908
Differential Revision: https://developer.blender.org/D12312
Add null check for runtime data since it could already have been
freed via wm_xr_exit() (called on file read) prior to the session
exit callback.
Also, fix potential memory leak by freeing session data in
wm_xr_runtime_data_free() instead of session exit callback.
This fixes two memory leaks related to XR action maps.
1. Freeing of action maps needs to be moved from wm_xr_exit() to
wm_xr_runtime_data_free() since the runtime may have already been
freed when calling wm_xr_exit().
2. Action bindings for action map items were not being freed. This
was mistakenly left out of e844e9e8f3 since the patch needed to be
updated after d3d4be1db3.
This fixes a mistake in the XrActionMaps RNA struct declaration.
Originally, the XrActionMaps struct SDNA was set as wmXrData to get
access to wmXrRuntimeData. However, this doesn't give a valid pointer
and the XrSessionState RNA pointer needs to be passed instead.
Since XrSessionState itself does not have SDNA, it is necessary to
pass the XrSessionState pointer to the XrActionMaps struct functions
(new(), new_from_actionmap(), ...) instead of simply using
RNA_def_struct_sdna().
Having settings such as "extend" saved between executions causes
keymaps that don't include this setting to remember the value
between execution.
No longer store this setting for selection operations & remove
redundant values from the key-maps, see: T90275.
Remove BLI_str_utf8_as_unicode_and_size and
BLI_str_utf8_as_unicode_and_size_safe.
Use BLI_str_utf8_as_unicode_step instead since it takes
a buffer bounds argument to prevent buffer over-reading.
There were multiple utf8 functions which treated
errors slightly differently.
Split BLI_str_utf8_as_unicode_step into two functions.
- BLI_str_utf8_as_unicode_step_or_error returns error value
when decoding fails and doesn't step.
- BLI_str_utf8_as_unicode_step always steps forward at least one
returning the byte value without decoding
(needed to display some latin1 file-paths).
Font drawing uses BLI_str_utf8_as_unicode_step and no longer
check for error values.
Instead of passing separate booleans for whether to store the locations
and distances, check if the spans are empty. And instead of passing a
separate boolean for whether there is valid tree data, pass a pointer
to the data.
The comment for data_eval mentions that it should contain a mesh for
curve objects, however with geometry nodes, objects can evaluate to
curves as well (though they are only containers for the `CurveEval`.
That is a larger issue, but with the upcoming geometry instancing patch
the situation changes, so this commit does not correct that. I also hope
to remove this code in favor of the new curve to mesh code soon.
Instead, just check the evaluated data type in this case, which prevents
the crash, though it is hacky.
- New operator property to toggle edge panning in the keymap:
This is disabled by default to avoid edge-panning in cases where it
gets distracting, such as adding a new node. Only the explicit
translate operator(s) (GKEY or drag) have this enabled now.
- Restore the initial view rect on edge pan cancel:
The initial view rect is now stored in the edge pan operator data.
When an operator with edge panning is cancelled it can now call the
`UI_view2d_edge_pan_cancel` function to restore the original View2D
rect.
- Less delay in node editor scrolling:
Delay is useful when scrolling through long lists, such as in the
outliner, but makes node scrolling feel sluggish and unresponsive.
The lower scroll speed here makes a faster response the better option.
- Zoom influence feature:
Somewhat slower scrolling in UI-space when zoomed out. With the 0.5
zoom influence factor nodes behave as if zoom factor is halved,
otherwise it gets too fast when zoomed out. Previously scrolling would
always be constant-speed in UI space, now it's half-way between UI
space and node (view) space.
Before this patch attempting to remove a particle modifier programmatically
through Python would fail, because it deleted the modifier associated with
the currently active particle system instead of the one passed as an argument
to `bpy.types.ObjectModifiers.remove()`.
This fix adds an additional argument for the particle system to
`object_remove_particle_system`. This allows to specify which particle system
and its associated modifier shall be removed. In case of
`particle_system_remove_exec` it will remain the currently active particle
system, whereas `object_remove_particle_system` passes the particle system
of the modifier. Hence, the correct modifier will be removed.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D12234
The idea is to only allocate pixel storage only when there is an actual
data to be written to them.
This moves the code forward a better support of high-res rendering when
pixel storage is not allocated until render engine is ready to provide
pixel data.
Is expected to be no functional changes for neither users no external
engines. The only difference is that the motion and depth passes will
be displayed as transparent for until render engine provides any tile
result (at which point the pixels will be allocated and initialized to
infinite depth).
Differential Revision: https://developer.blender.org/D12195
This overlay was intended to identify the active objects in modes
like Sculpt Mode, where you don't have any extra visual indication
of what is the current and target object when switching directly
between them.
After having flash on mode transfer on the transfer mode operator,
the visual information this overlays provides is redundant. It is
still available in case some users want to use it like a way of
focusing on the active object.
Reviewed By: JulienKaspar, JacquesLucke
Differential Revision: https://developer.blender.org/D12303
We need to separate the flag telling duplicate code to not handle
remapping to new IDs etc., from the one telling the code that we are
currently duplicating a 'root' ID (i.e. not a dependency of another
duplicated ID).
This whole duplicate code/logic is still fairly unsatisfying, think it
will need further refactor, or maybe even re-design, at some point...
