The same logic from D17025 is used in other places in the curve code.
This patch uses the class for the evaluated point offsets and the Bezier
control point offsets. This helps to standardize the behavior and make
it easier to read.
Previously the Bezier control point offsets used a slightly different standard
where the first point was the first offset, just so they could have the same
size as the number of points. However two nodes used a helper function
to use the same `OffsetIndices` system, so switch to that there too.
That requires removing the subtraction by one to find the actual offset.
Also add const when accessing data arrays from curves, for consistency.
Differential Revision: https://developer.blender.org/D17038
The lookup table method on CPU and the numerical root finding method on
GPU give quite different results. This commit deletes the Beckmann lookup
table and uses numerical root finding on all devices. For the numerical
root finding, a combined bisection-Newton method with precision control
is used.
Differential Revision: https://developer.blender.org/D17050
Previously, transforming a clip (scaling, repeat, etc) wouldn't re-calculate the blend-in and blend-out values, leading to over / undershoot, and a visual clip artifact
Old:
{F14045003}
This patch adds re-calculation logic (new `BKE_nlastrip_recalculate_blend()` method) to the blend-in/out on transformations to clamp values, and avoid over/under shoot.
The `BKE_nlastrip_recalculate_blend()` encapsulates the existing logic for both the `rna_NlaStrip_blend_in_set()` and `rna_NlaStrip_blend_out_set()` methods into a single BKE method that we an execute as needed. The fact that blend-in is first decreased, is strictly on the order of calculation. My suspicion is that //if// the blend-in / blend-our values were working as intended, the RNA set methods would update in order, and we'd experience the same thing. In short, the choice here was to linearly combine the logic, without making any assumptions of my own.
while talking things over with @sybren and @RiggingDojo, they are fine with how this currently works, but there a desire to update how the two values interact with each (ratio scale, etc) in the future.
New:
{F14045024}
{F14045025}
Reviewed By: sybren
Maniphest Tasks: T101369
Differential Revision: https://developer.blender.org/D16720
This makes it possible to use `texture` and `texture3d` in custom
OSL shaders with a constant image file name as argument on the
GPU, where previously texturing was only possible through Cycles
nodes.
For constant file name arguments, OSL calls
`OSL::RendererServices::get_texture_handle()` with the file name
string to convert it into an opaque handle for use on the GPU.
That is now used to load the respective image file using the Cycles
image manager and generate a SVM handle that can be used on
the GPU. Some care is necessary as the renderer services class is
shared across multiple Cycles instances, whereas the Cycles image
manager is local to each.
Maniphest Tasks: T101222
Differential Revision: https://developer.blender.org/D17032
This patch adds markup to specify that certain kernel data constants should not be specialised. Currently it is used for `tabulated_sobol_sequence_size` and `sobol_index_mask` which change frequently based on the aa sample count, trash the shader cache, and have little bearing on performance.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D16968
This patch adds occupancy tuning for the newly announced high-end M2 machines, giving 10-15% render speedup over a pre-tuned build.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D17037
Split the algorithms that find duplicates.
This improves readability and helps us find areas for optimization.
It may also facilitate the implementation of generic utilities.
No functional changes.
Differential Revision: https://developer.blender.org/D16918
Code authored by Michael B Johnson (drwave).
Reviewed by Sybren and makowalski.
This patch addresses a crash that occurs when exporting a
scene to a USD file, when that scene includes a point cloud
object or hair.
Added OB_POINTCLOUD and OB_CURVES enums and a default case
statement in the switch statement in
USDHierarchyIterator::create_data_writer, to avoid dereferencing
a NULL pointer.
Differential Revision: https://developer.blender.org/D16776
`batch_for_shader` is an utility function that creates the correct
vertex buffer based on the given shader. In the shader interface
the `attr_types_` contains the GPUType for each location in the
vertex buffer.
When using Metal, the `attr_types_` was never updated, resulting
in using incorrect or non-existing data types. This patch fixes
this by updating the `attr_types_` when building the shader
interface.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D17042
When using the "normalized" display of FCurves in the
Graph Editor, and also turning on the preview range,
the normalized display would break.
The preview frame range was assumed to be bezt indices,
which is only true when every frame has a key.
Reviewed by: Colin Basnett
Differential Revision: https://developer.blender.org/D16987
Ref: D16987
Similar to rBe97443478e32 and rBe772087ed664, exit early when
texture, collection and world ID has no parent to unlink from.
Reviewed by: Severin, lichtwerk
Differential Revision: https://developer.blender.org/D17017
The line art modifier added a wmNotifier in it's
GpencilModifierTypeInfo.generateStrokes callback which isn't thread-safe
when called from the depsgraph. This was from the original inclusion
of the feature [0] however a more recent optimization to notifier
lookups [1] made the crash occur more frequently.
Remove the notifier as modifiers should not be adding WM level events
and it works without it.
[0]: 3e87d8a431
[1]: 0aaff9a07d
This was the case when using the operator outside of the modifiers panel.
Caused by {rBeae36be372a6}.
In above commit, `DT_layer_items` shared both `DT_TYPE_MPROPCOL_LOOP` |
`DT_TYPE_MLOOPCOL_LOOP` in a single EnumPropertyItem value "Colors".
This is a bit unusual, but probably allowed.
As a consequence, checks for specific datatypes would fail when selecting
such EnumPropertyItem:
- `DT_DATATYPE_IS_MULTILAYERS` (uses `ELEM` to check distinct entries --
would return false)
- `BKE_object_data_transfer_dttype_to_srcdst_index` (would return
`DT_MULTILAYER_INDEX_INVALID`)
These places have now been corrected to take these "special" values into
account.
Another issue was that multiple EnumPropertyItems with the same value
could be created in dt_add_vcol_layers() if attributes of the same
domain, but different color types are in play (could lead to crashes)
and that has also been corrected.
Also: above commit did not give the choice of transfering color
attributes from the vertex domain (only face corner attributes could be
chosen), this has now been added. DT_layer_vert_items (used from the
modifier) already had this included so this was only an issue when using
the operator outside of the modifiers panel.
Since we now feature two domains, the single "VCOL" in the enum has been
split into "COLOR_VERTEX" and "COLOR_CORNER". This will break existing
scripts calling bpy.ops.object.datalayout_transfer and will be marked as
a breaking change in the release notes.
NOTE: there is another bug here when attributes of the same domain, but
different color types are in play and you want to transfer just a single
specific layer (but that is for a separate commit)
Maniphest Tasks: T103400
Differential Revision: https://developer.blender.org/D16935
Goal of this patch is to stop the invocation of OpenGL calls via the bgl module
on a none OpenGL GPU backend, report this as a python deprecation warning
and report this to the user.
## Deprecation warning to developers
```
>>> import bgl
>>> bgl.glUseProgram(0)
<blender_console>:1: DeprecationWarning: 'bgl.glUseProgram' is deprecated and will be removed in Blender 3.7. Report or update your script to use 'gpu' module.
```
## Deprecation message to users
The message to the user is shown as part of the Info Space and as a message box.
{F14159203 width=100%}
{F14158674 width=100%}
During implementation we tried several ideas:
# Use python warning as errors: This isn't fine grained enough and can show incorrect information to the user.
# Throw deprecation as error and use sys.excepthook to report the user message.
This required a custom exception class to identify the bgl deprecation and a CPython handler function to
be set during python initialization. Although this is the most flexible there was a disconnect between the
exception class, exception function and the excepthook registration.
# A variant how we handle autoexec failures. A flag is stored in Global and when set the user message is reported.
Not that flexible, but code is more connected to the boolean stored in the Global struct.
Although using Global struct isn't nice I chose this solution due to its traceability. It is clear to developers
reading the code how the mechanism works by using search all functionality of your IDE.
Reviewed By: MichaelPW, campbellbarton
Maniphest Tasks: T103863
Differential Revision: https://developer.blender.org/D16996
This makes it convenient to build blender without referencing
pre-compiled libraries which don't always work on newer Linux systems.
Previously I had to rename ../lib while creating the CMakeCache.txt
to ensure my systems libraries would be used.
This change ensures LIBDIR is undefined when WITH_LIBS_PRECOMPILED is
disabled, so any accidental use warns with CMake's `--warn-unused-vars`
argument is given.
These warnings can reveal errors in logic, so quiet them by checking
if the features are enabled before using variables or by assigning
empty strings in some cases.
- Check CMAKE_THREAD_LIBS_INIT is set before use as CMake docs
note that this may be left unset if it's not needed.
- Remove BOOST/OPENVDB/VULKAN references when disable.
- Define INC_SYS even when empty.
- Remove PNG_INC from freetype (not defined anywhere).
The original code used `BLI_polyfill_calc` which can create degenerate
triangles during triangulation per T103913. This causes the subsequent
overlap test to produce incorrect results in certain cases. Change to
using a "beauty" fill instead.
Differential Revision: https://developer.blender.org/D17015
There is a utility method on `CurvesGeometry` to build a map of the
curve for each point. Use that in two more places and make sure its
implementation is multithreaded, which gives a slight speedup
in a simple test file.
When doing partial reloads of asset libraries (only reload assets from
the current file, e.g. after undo re-allocated ID pointers), we'd end up
with assets that don't have their asset data read correctly. It would
execute a branch that didn't set the asset library object necessary to
create and store asset representations.
Steps to reproduce were:
* Open .blend file with geometry node assets in there
* In a geometry node editor, press Shift+A to open the add menu
* Cancel
* Move a node
* Undo
* Press Shift+A again
