Caused by {rBcf2baa585cc8}.
For Curve Guide force fields to work, the `Path Animation` option has to
be enabled. With it disabled, we are lacking the necessary
`anim_path_accum_length` data initialized [done by
`BKE_anim_path_calc_data`] which `BKE_where_on_path` relies on since
above commit.
Now just check for this before using it - and return early otherwise.
Prior to said commit, `BKE_where_on_path` would equally return early
with a similar message, so that is expected behavior here.
Maniphest Tasks: T93338
Differential Revision: https://developer.blender.org/D13371
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
NOTE: Since this change introduce issues for some cases (e.g. bound
modifiers like SurfaceDeform), this change is only applied to newly
created modifiers, existing ones will still use the old incorrect merge
behavior.
Reviewed By: @brecht
Maniphest Tasks: T93321, T91444
Differential Revision: https://developer.blender.org/D13355
Revert "Fix T91444: Edge Loop Preview fails with two Mirror Modifiers"
This reverts commit 1a7757b0bc.
Caused issue reported in T93321, boiling down to the fact that other
operations or modifiers (like the SurfaceDeform one) rely on the order
of the vertices in the mesh to remain consistent.
Changing this in a modifier would mean those operations need to be
reset/re-created (e.g. rebound for the SurfaceDeform case), which is not
doable in `do_version` code.
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
Basically, this fixes disappearing previews when editing asset metadata
or performing undo/redo actions.
The preview generation in a background job will eventually modify ID
data, but the undo push was done prior to that. So obviously, an undo
then would mean the preview is lost.
This patch makes it so undo/redo will regenerate the preview, if the preview
rendering was invoked but not finished in the undone/redone state.
The preview flag PRV_UNFINISHED wasn't entirely what we needed. So I had to
change it to a slightly different flag, with different semantics.
The problem was that we forgot to actually remove the vertex group when
it should be deleted. We only removed all the data that was attached to it.
Differential Revision: https://developer.blender.org/D13326
Add an operator "Copy to Asset Library" for installing asset bundles
into already-existing asset libraries.
The operator is shown when:
- the "Current File" library is selected,
- the blend file name matches `*_bundle.blend`, and
- the file is not already located in an asset library.
The user can select a target asset library, then gets a "Save As"
dialogue box to select where in that library the file should be saved.
This allows for renaming, saving in a subdirectory, etc.
The Asset Catalogs from the asset bundle are merged into the target
asset library.
The operator will refuse to run when external files are referenced. This
is not done in its poll function, as it's quite an extensive operator
(it loops over all ID datablocks).
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13312
This was broken by rB0c3b215e7d5456878b155d13440864f49ad1f230.
The caching of loaded exr files needed some special treatment.
Differential Revision: https://developer.blender.org/D13313
There was a missing normals layer that was requested by the data transfer
modifier from the target object. The normal layer was correctly added to
the target object. However, it never reached the data transfer modifier
because the mesh was copied in `BKE_object_get_evaluated_mesh`
(in the call to `get_mesh_for_write`) and the copy does not include the normals
layer.
The solution is to not use `get_mesh_for_write` here which was only used
because `BKE_object_get_evaluated_mesh` returns a non-const `Mesh *`.
Mid term, it should actually return a `const Mesh *` to avoid the confusion.
Differential Revision: https://developer.blender.org/D13319
Mistake in e7bea3fb6e.
We should only skip preview generation for objects that don't support
preview rendering, not completely forbid accessing preview data of such
IDs.
Asset libraries should be directories on disk. By manually entering a
file path it was possible to have a single blend file as asset library,
but that was not a designed-for situation, and it doesn't play well
with the asset catalog system.
Original implementation was a quick prototype which should have never
landed as-is in master. It had very limiting constraints and did not
allow for any real further development.
This commit fixes the internal implementation to make more sensible,
maintainable and evolutive.
NOTE: This commit introduces another forward-incompatibility in the
Blender file format: Files saved after this commit won't open properly
in older versions of blender regarding local inserted constraints or
modifiers into overrides of linked data.
NOTE: Technical details: The 'anchor' item name/index is now stored in
`subitem_reference_` members, and the actual 'source' item name/index is
stored in `subitem_local_` members of the override property operation
data.
Previously, only the `subitem_local_` members were used, storing the
anchor item name/index, and assuming the 'source' item was always the
next in the list.
Milestone I of T82160.
Maniphest Tasks: T82160
Differential Revision: https://developer.blender.org/D13282
The Cycles accurate mode was removed, but the Eevee option for this has
a different meaning and should not have been removed. The Eevee accurate
makes cryptomatte accumulate for every sample, which Cycles has always
done regardless of any option.
The spline code, especially Bezier splines, often make use of lazily
evaluation and caching. In order to do that, they use mutex locks.
When multi-threading, this can lead to problems. Further detail
can be found in rBfcc844f8fbd0d1.
To fix the deadlock, isolate the task before multi-threading
when holding a lock.
Differential Revision: https://developer.blender.org/D13229
Fix a crash when a hair system's `ParticleSettings` ID datablock was
linked from another file but couldn't be found. This results in default
settings, with `type = PART_EMITTER`, where the particle data still has
a non-NULL `hair` pointer. Previously, copies of such a particle system
would NOT copy hair data for non-hair particle systems, hence the
pointer of the copy pointed to the original data, which got freed (at
least) twice upon closing the blend file.
This is now fixed by always copying the hair data, regardless of the
particle system type.
Reviewed by: mont29
Differential Revision: https://developer.blender.org/D13245
Dispose of GHOST system paths when tearing down `BlendfileLoadingBaseTest`
and some other test cases. This prevents a memory leak.
A better solution would be to rework Blender's initialisation & teardown
structure, but that's outside the scope of this fix.
No functional changes to Blender.
When proxy size lower than 100% is used, clip strips are rendered with
incorrect image size.
This is because if proxies aren't enabled in movieclip, it automatically
falls back on rendering original media. Sequencer doesn't have knowledge
about this and since 9c99292a16 it assumes that image is proxy,
because it explicitly requested this size.
Check movieclip flag to see if proxies are enabled.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13080
Cause of this issue is that Custom Node Sockets info type was
initialized as SOCK_FLOAT when registering. Areas within the core that
would ignore custom socket types by checking its type would use the
socket as being a float type.
When custom node sockets have a property called default_value blender
tries to store it as an internal default value what failed in debug
builds.
This patch will set the socket type to SOCK_CUSTOM when registering a
custom socket type and allow, but skip storage of custom default values.
In this case the default values should already be stored as custom
properies.
Reviewed By: campbellbarton, JacquesLucke
Maniphest Tasks: T89260
Differential Revision: https://developer.blender.org/D13174
Blender 3.0 will only support single-frame Actions in the pose library.
The goal of this patch is to lay the groundwork for making it possible
for the Asset Browser to reject/hide "animation snippet" Action assets.
Determining whether an Action has one or more frames (i.e. whether it
has a single pose or animation) requires inspecting the Action itself,
and thus loading the data-block itself. This would make it impossible to
quickly determine from the asset browser.
To solve this, the Action is inspected before saving, and a
`"is_single_frame"` boolean (well, 0/1 integer) IDProperty is added.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13202
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
When Constructing bezier splines from dna, the positions of the
left/right handles were set directly in the internal vectors, by
requesting a reference to them. The problem is that
BezierSpline::handle_positions_left() calls ensure_auto_handles()
before returning the reference. That function does some calculations on
uninitialized memory if the positions array is not yet filled.
Differential Revision: https://developer.blender.org/D13107
When clearing geometry the runtime mutexes of a mesh were freed. This
resulted in crashes afterwards. The clear geometry is an RNA function so
would only effect when using from scripts.
This patch separates init/freeing of the mutexes from other code so they
can be used when needed.
Reviewed By: mont29
Maniphest Tasks: T91518
Differential Revision: https://developer.blender.org/D13142
Currently we have a fixed instance recursion limit. While we want to lift this
limitation at some point, that is out of scope for a bug fix. For now just print
a warning to make it easier to detect the issue.
Differential Revision: https://developer.blender.org/D13162
Interpolation vertex data on loose edges was writing into already
allocated data.
Resolve this by skipping vertex end-points for custom-data interpolation
which has already been copied from the source mesh.
Reviewed By: sergey
Ref D13082
Evaluated meshes from curves are presented to render engines as
separate instance objects now, just like evaluated meshes from other
object types like point clouds and volumes. For that reason, cycles
should not consider curve objects as geometry (previously it did,
meaning it retrieved a second mesh from the curve object as well
as the temporary evaluated mesh geometry).
Further, avoid adding a curve object's evaluated mesh as data_eval,
since that is special behavior for meshes that is arbitrary. Adding an
evaluated mesh there but not an evalauted pointcloud is arbitrary,
for example. Retrieve the evaluated mesh in from the geometry set
in BKE_object_get_evaluated_mesh now, to support that change.
This gets us closer to a place where all of an object's evaluated data
is stored in geometry_set_eval, and we just have helper functions
to access specific geometry components.
Differential Revision: https://developer.blender.org/D13118
During animation playback, data-blocks are reallocated, so storing
pointers to the resulting data is not okay. Instead, the data should
be retrieved from the context. This works when the applied search
item is the "dummy" item added for non-matches. However, it still
crashes for every other item, because the memory is owned by the
modifier value log, which has been freed by the time the exec function
runs.
The next part of the solution is to allow uiSearchItems
to own memory for the search items.
The point domain attributes (stored on splines) are sorted so they
have a consistent order on all splines after the join. However, spline
domain attributes were included in the new order, which didn't work
because the length of the attribute lists didn't match. The simple fix
is to only include point domain attributes in the new order vector.
In some cases when geometry is created in Geometry Nodes
the viewport stats will show 0 because runtime data is not filled.
This patch sets the runtime data on instances.
Differential Revision: https://developer.blender.org/D12738
For single point splines that weren't at the origin, the results were
incorrect. Now take into account the tilt, radius, etc. just like the
general case.
A group node could reference an undefined group when the group
was linked and its source file was not found on load. The field
inferencing code did not handle that case before.
With this change, the file provided in T92799 loads successfully.
Many modifiers and other places use `CustomData_copy_data` to copy data
between different meshes. This function assumes that assumes that the
source and destination `CustomData` objects are "compatible" in some way.
Usually modifiers use `CustomData_copy` to create a compatible new
`CustomData` on the new mesh. The issue was that the optimization I added
for anonymous attributes broke this compatibility. It avoided copying some
attributes when they are no longer used.
This lead to attributes being copied incorrectly.
D13083 contains ideas for how this could be fixed more generally.
For now I just removed the optimization.
Differential Revision: https://developer.blender.org/D13083
By default, when syncing materials slots between object and its obdata,
the amount of slots in obdata is the reference.
Missing linked obdata is replaced by an empty placeholder that has no
material. In that specific case, if we have a valid object ID, we want
to update the (placeholder) obdata's material count from the object one,
and not the other way around.
The version patch for 0cf9794c7e was checking and setting a data name
using the macros for translation. These would access the current
preferences which can mismatch the ones currently being version patched.
See discussion in 0cf9794c7e for details.
Don't handle translation in this version patch, which is more of a
"nice-to-have" version patch, no functionality depends on it.
This properly checks the order of point domain attributes on each
spline, and avoids the map, which makes the code easier to understand.
The assert is also added to realizing instances and the join node.
Differential Revision: https://developer.blender.org/D13071
Currently the curve to mesh node relies on the order of attributes being
the same on every spline. This is a worthwhile assumption, because it
will allow removing the attribute name storage duplication on every
spline in the future.
However, the join geometry node broke this order, since it just created
new attributes without any regard to the order. To fix this, I added a
"reorder" step after all the merged attributes have been created, the
types have been joined, etc. It should be possible to change this code
so that the attributes are added with the right order in the first
place, but I would like to do that after refactoring spline attribute
storage, and not for 3.0.
Differential Revision: https://developer.blender.org/D13074
