Crash happened because code could not find a valid base in current scene
after adding the object, added some checks for that.
Root of the issue was wrong assumptions in `BKE_object_add` logic, which
would pick the first valid ancestor collection in case initially
selected collection was not editable. In some case, this could pick a
collection not instanced in the current scene's view layer, leading to
not getting a valid base for the newly added object.
Addressed this by adding a new variant of `BKE_collection_object_add`,
`BKE_collection_viewlayer_object_add`, which ensures final collection is
in given viewlayer.
Code was using the loop [which is looping over the selection] index as
an index for the lookup into the edges directly, but needs to be a
lookupinto the IndexMask.
Also renamed the variable (as used elsewhere) to make this more clear.
If accepted, would be nice to still get this into 3.2.
Maniphest Tasks: T98536
Differential Revision: https://developer.blender.org/D15089
The tweak tool was toggling node selection twice, as the selection
key-map is already accounted for in the node key-map there is no need
to duplicate the actions in the tweak tool.
Although reusing the same patch coordinate for all corner pointing the
same vertex works for interpolation vertices, it does work for
interpolation face varying attributes. So we need to keep the original
patch coordinates around for face varying interpolation. This was caused
by the previous fix (a5dcae0c64).
The existing BUTTONS_OT_file_browse operator that's used for
uiTemplateImage layouts fails to work correctly with UDIM textures.
This is mainly due to it not realizing that it must tokenize the
filepath before signaling that an update has been made. It also doesn't
work correctly when executing its SHIFT-click behavior to open the image
in an external application. Lastly, it doesn't set the filters to Images
and Movies which is suboptimal for the user.
The new operator takes the unique features of BUTTONS_OT_file_browse
and creates a customized variant better suited for images.
Differential Revision: https://developer.blender.org/D14824
Also cleaned up the code a tad bit. Note that I
found two more bugs:
* GPU subdivision attribute interpolation
is producing visual artifacts.
* "Show on cage" mode for subdivision surface
just shows black colors.
Sculpt undo now detects if an attribute layer has
changed type/domain and unconverts it back. This
is a temporary workaround to a more fundamental
bug in the undo system.
Memfile undo assumes it can always rebuild the
application state from the prior undo step,
which isn't true with incremental undo systems.
The correct fix is to push an extra undo step prior
to running an operator if an incremental undo system
is active and the operator is using memfile undo.
Removed OPTYPE_UNDO flags from the swap brush colors and
sample color operators. These types of operators are
not supposed to be undoable in the first place. Also
memfile undo is too buggy for it.
The issue was that the extend socket (the last empty socket in
Input/Output nodes) was repeatedly removed and added again,
which caused more updates than necessary. Now, the extend
socket is kept if it existed already.
Differential Revision: https://developer.blender.org/D15084
Issues stems from the mesh not being watertight. This was caused by
floating point precision issues when evaluating patch coordinates at
patch boundaries (loops/corners in different patches pointing to the same
vertex). To fix this we ensure that all loops pointing to the same vertex
share the same patch coordinate. This keeps code simple, and does not
require to track precision issues in floating point math all over the
place.
See previous commit for an explanation of what went wrong. Similar to
the fix there, we also have to update the dragged data (e.g. the
data-block) referenced by the button.
Committing separately since this could cause further issues.
In Blender buttons are recreated over redraws, except of the active
button which is kept alive, and replaces the new version of itself in
the new redraw. In order to do that, the button needs to be recognized.
This process of recognizing and matching buttons from different redraws
isn't always bullet-proof. That's okay-ish, but we have to make sure
that the relevant data of the old active button is updated with the
newest data.
Here the matching would go wrong, and the new active button was
recognized as the old active button, which was in fact removed when the
asset was cleared. This patch makes sure the image buffer attached to
the buttons is updated when buttons were recognized as matching.
Note that the dragging will still use the wrong data-block, this will be
fixed in the following commit.
The operator assumed it was called on a mesh object, which has
mostly been the case because of lack of support for other object
types, but the new curves object is supported, which is the situation
in the report.
Differential Revision: https://developer.blender.org/D15063
Some of the tools in sculpt mode were still referring to the previously experimental sculpt vertex colors.
They should instead refer to color attributes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D15073
This commits corrects the calculation of the Frame Node label size,
making it independent of the 'Line Width' user preference.
Since `U.dpi` is actually DPI divided by `U.pixelsize` and `U.pixelsize`
is calculated from line-width multiplying by `U.pixelsize` undoes
the connection between line-width and label size.
It now stays the same, regardless of the line-width setting.
Reviewed By: Julian Eisel, Harley Acheson
Differential Revision: https://developer.blender.org/D14338
These lines were not used now because the handling of copy data has changed.
Assigning the `eval` data can produce unexpected result, especially since everywhere ID_RECALC_TRANSFORM is used, we also do a copy on write. That should take care of `ob->data` for the eval object.
The problem was because the check was done with the total weights of the first element of the array and if this was null or 0, the weights were not duplicated.
As this bug was introduced fixing T97150 due a problem in the weight data, now instead to duplicate all stroke data to create the perimeter for the PDF/SVG, only the points are duplicated because the weights are not needed. This fix the original bug and also reduce the memory used by the export process.
Subdivision did not properly update when evaluating first without and then with
orco coordinates. Now update the subdivision evaluator settings every time, and
reallocate the vertex data buffer when needed.
there is an additional issue in this file where orco coordinates are not
available immediately on the first frame when they should be, and only appear
on the second frame. However that is an old limitation related to the depsgraph
not getting re-evaluated on viewport display mode changes, here we just fix the
crash.
I'm not sure what is causing this. Vertex normals get corrupted
for paint and mask sculpt brushes but not the normal geometric
ones. Since we don't actually need to recalculate normals
here to begin with I've just disabled it. The code now
calls the appropriate node mark update function based on
the sculpt tool.
Previously, when there were multiple curve points at the same or
almost the same position, the computed tangent was unpredictable.
Now, the handling of this case is more explicit, making it more
predictable. In general, when there are duplicate points, it will just use
tangents from neighboring points now.
Also fixes T98209.
Differential Revision: https://developer.blender.org/D15016
The original fix for T97366 was too restrictive and breaks real-world
cases of single-file UDIM textures. See D13297 for an example.
This patch effectively reverts the original fix and instead fixes the
downstream code to accept single-file ranges as necessary.
Note: This means it is very important for users to make use of the
"UDIM detection" option during `image.open` or drag n' drop scenarios in
order to declare their intent when loading their files.
Differential Revision: https://developer.blender.org/D14853
After removing the default 'Home' shortcut for "Frame All", a NDOF (3D
Mouse) default shortcut was still available for the operator. The event
filtering introduced in 4357fb63db was missing the NDOF filtering
logic. So while the context menu correctly found the NDOF keymap item,
its actual shortcut change/removal code incorrectly filtered out the
NDOF keymap items and thus failed to find the item.
This is a regression caused by a230445cae.
The internal cause of the issue was that the synchronization component
was no longer tagged as visible (and hence not evaluated) as it not
connected to any directly visible IDs.
Changed the logic in a way that if any component of an ID is evaluated
the synchronization component will be evaluated as well.
The naming of the flag in the component node is a bit confusing, but
for the simplicity of the change for the upcoming release left it
unchanged.
`BKE_id_delete` should only check for consistency of user count with
regards to the tags and flags of the ID, not 'protect' nor even warn in
case a 'fake user' ID is deleted (such higher-level checks are to be
handled by higher-level code).
Also replace the assert + debug print by a CLOG error, this avoids
'assert crash' while still failing tests, and always producing a useful
message.
Fixes T98374 and T98260.
A global variable was mistakenly used here which would accumulate the
vertex attributes (leading to an assertion failure after a while), use
the wrong number of components depending on the attribute data type,
among other issues.
Faces, edges, and vertices are still shown when GPU subdivision is
actived. This is because the related edit mode flags were ignored by the
subdivision code.
The flags are now passed to the various compute shaders mostly as part of
the extra coarse data, also used for e.g. selection. For loose edges, a
temporary buffer is created when extracting them. Loose vertices are
already taken into account as it reuses the routines for coarse mesh
extraction, although `MeshRenderData.use_hide` was not initialized,
which is fixed now.
When appending an already linked data, `BKE_blendfile_append` would not
properly substitute the `item->new_id` pointer of link/append context
items with the local duplicate of the linked ID.
This would cause drag'n'drop of assets to work incorrectly in some
cases. Fixes part of T95706 and T97320.
Regression in [0] which removed the call to BVH-tree recalculation
before calculating the selection.
Instead of recalculating the BVH-tree, postpone recalculating mesh data
until after the selection has been calculated.
[0]: 6e77afe6ec
Added in [0] but isn't needed as all needed variables are in the
ViewContext. Avoid passing in the context is it makes debugging
issues with MESH_OT_knife_project more difficult to investigate since
it's possible values written to the ViewContext are ignored.
[0]: 6e77afe6ec
When no image user is known the last used frame of the image is used to
read a frame. When partial updating an image there is always an image user
that would use a zerod out image user, meaning the frame number is set to 0
when using the clone tool.
This fix syncs the frame with the last used frame of the image to ensure
that the buffer exists. There is a bailout in the overlay_edit_uv.c.
8f79fa9c67 was an attempt to fix this already, but it didn't quite
work. Problem was that the tooltip was messing with the drop-box and
operator properties, setting the name property for its own internal
logic. This name property would then be used rather than the session
UUID to query the material, which gave the wrong material (linking can
result in multiple IDs of the same type with the same name). A followup
commit will further sanitize this.
More and more of the drop operations are being switched to use the ID's
session UUID rather than the name, but the cleanup after a drop operator
was cancelled assumed they would set the name. They will now first
attempt to use the session UUID and fallback to the name if needed.
