The skin modifier did not output consistent results, causing failure to find
corresponding vertices across frames.
Remove unnecessary use of GSet, all we need is an array.
This reverts commit 4987b7d347.
This introduced a slight change in curve direction at end-points
(while correct), it caused tests to fail.
Keep this change for 2.92, revert for 2.91.
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
The code for determining coplanar clusters had a bug where it would
miss some triangles. The fix for now is to just put triangles in
the cluster if their bounding boxes overlap. This works but maybe
makes clusters bigger then they have to be. I'll follow this commit
with work on making the CDT routine faster when using exact arithmetic.
Also removed a lot of unused code, and added some new intersect
performance tests.
When using a trackpad Zoom to Mouse Position would always zoom to center of canvas.
Differential Revision: https://developer.blender.org/D8683
Reviewed by Brecht Van Lommel
Ensure that Zoom does not crash on Mac Trackpad by checking for existence of Continuous Zoom timer.
Differential Revision: https://developer.blender.org/D8682
Reviewed by Julian Eisel
When using Optimal Display, some edges are not flagged `ME_EDGEDRAW` |
`ME_EDGERENDER`.
When the modifier is applied through the UI in the modifier stack this is
not an issue because the `modifyMesh` callback is run with
`MOD_APPLY_TO_BASE_MESH` (this will effectively turn of Optimal
Display).
When converting to mesh though, this will just get an evaluated mesh
(where the edge flags are still the same as with the subdivision
modifier).
Now ensure every edge is flagged to draw after conversion.
Maniphest Tasks: T81997
Differential Revision: https://developer.blender.org/D9331
Caused by rBb077de086e14.
Not entirely sure why this was rebuilding the tree prior to above
commit, but sending an ND_OB_SHADING notifier is appropriate (and also
what the Outliners listener listens to).
Maniphest Tasks: T82251
Differential Revision: https://developer.blender.org/D9396
This is caused by the TAA being reset after the init phase, leading to
1 sample being kept as valid when it is clearly not.
To fix this, we run the lookdev validation before TAA init.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9452
So a keyframed e.g. location slider would stay yellow/green even if its
corresponding channel was removed.
Needs a appropriate notifier so the listeners (e.g.
buttons_area_listener, view3d_buttons_region_listener) would cause a
redraw.
Maniphest Tasks: T82364
Differential Revision: https://developer.blender.org/D9438
accelerations
Caused by rB45dbc38a8b15.
Above commit would place parentheses surrounding a block until the next
operator was found.
For velocities and accelerations though, the '/' in 'm/s' or 'ft/s'
should not be considered an operator.
Maniphest Tasks: T82407
Differential Revision: https://developer.blender.org/D9467
When editbones were selected from the Outliner (and they were connected
to a parent) with the 'Sync Selection' option turned ON, they could not
get duplicated.
For duplication to work, the (connected) parent bone's tip also has to
be selected [which was not the case when selection is done from the
Outliner under above circumstances]. The reason being that
armature_duplicate_selected_exec ->
ED_armature_edit_sync_selection clears the BONE_ROOTSEL flag if the
parent bone's BONE_TIPSEL is not set.
Caused by rB71eb65328078 btw.
The correct "parent-tip-selection" would actually happen in activation
- `tree_element_active_ebone`
-- `tree_element_active_ebone__sel`
but for 'Sync Selection' this happens [also] in
- `outliner_sync_selection_from_outliner`
-- `outliner_select_sync_to_edit_bone`
which did not do the "flushing" to the parent bone's tip
Now use existing dedicated function for this.
ref. T82347
Reviewers: Zachman
Differential Revision: https://developer.blender.org/D9470
The draw face sets brush uses the poly center when used in meshes to increase
its precision when working in low poly geometry. For this to work with deformed
meshes, the deformed coordinates from the PBVH should be used instead.
Reviewed By: sergey
Maniphest Tasks: T81915
Differential Revision: https://developer.blender.org/D9424
BKE_mesh_free() seems to not free the meshes correctly, so using BKE_id_free() instead.
The looptri array was also not freed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9426
The two entries `TFM_MODAL_AUTOCONSTRAINT` and
`TFM_MODAL_AUTOCONSTRAINTPLANE` had the same name
displayed in the UI. The latter is now includes
"plane" in it's name.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9474
This commit corrects the maximum resolution field in Fluid objects. The field should be set to the maximum possible resolution, i.e. it should not adjust with adaptive domains and stay constant all the time.
The reason for this is that this resolution value will be used to scale gravity. And this gravity should be constant for adaptive domains too.
It remains to be shown if this issue was the only reason for line-artifacts as seen in T74559.
Keymaps have previously been exported with an encoding dependent
on the current system locale. This caused issues when the
keymap contained non-ASCII characters, for instance in a string
property for an operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9449
Even after the last commit to fix this assert, it still fails in the
case where a button was added before there was a button group
added to the block. Another fix for this would be to always create
a button group in UI_block_begin, but this assert has no particular
purpose, so it's simpler to just remove it.
Set step in RNA property definition.
There was a hardcoded setting of a1 for this specific button, which
used to be the variable to store the step size of number buttons until
rBe6f0b60c2e91. hardcoded value is removed in rBe29206f86a5f.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9277
This patch will apply the view transform when a movie clip is used as
camera background image. It does this by rendering the image in the
color buffer when it needs the view transform. For other images it uses
the overlay buffer.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7067
Issue was that the `tris_per_mat` are not created when the first batch is drawn
during select operator and then is not created when needed by the workbench pass
since they are not tracked by mesh_buffer_cache_create_requested.
This change will create the `tris_per_mat` just in case they are needed later.
Solution by Clément Foucault
Differential Revision: https://developer.blender.org/D9430
The issue was that the volume for the current frame
might not have been loaded already by the time the
modifier runs.
The solution is simply to make sure that the volume
is loaded. This is similar to the Volume Displace modifier.
When there was an active button in the "old" block from the last redraw,
this code tried to replace its pointer in the new block's button groups.
But in cases like the outliner or file browser, there are no groups
because the block doesn't use the layout system at all. This commit
just tweaks the assert to check whether there are any button groups.
This enables self intersections in the sculpt trimming tools boolean operations.
This should fix wrong booleans results after using the operator to add new disconnected
geometry with the join mode.
Reviewed By: sergey
Maniphest Tasks: T81799
Differential Revision: https://developer.blender.org/D9423
