Part 2 of the patch I wrote moving USD over to the new Attributes API
for Colors: https://projects.blender.org/blender/blender/pulls/105347
This patch adds support for more types of generic Mesh Attributes.
Attribute Types and Domains are converted to their USD counterparts
where possible. For example, float Attributes used for modifying
shader masks or int Attributes for grouping are now able to be
round-tripped. Due to the differences in the two systems some
conversions are necessary, but attempts were made to keep data
loss to a minimum.
If you export to USDA, you'll find the Attributes get prefixed with
a "primvars:" namespace; this is expected behavior and identifies
the exported Attributes as different from other USD Schema.
Not supported:
- Edge domain. There doesn't seem to be a proper conversion for
this in USD. One exception is for creasing and sharpness, but if
they are desired I can add them in a future patch.
Co-authored-by: kiki <charles@skeletalstudios.com>
Co-authored-by: Charles Wardlaw <cwardlaw@nvidia.com>
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Charles Wardlaw <kattkieru@users.noreply.github.com>
Co-authored-by: Michael Kowalski <makowalski@nvidia.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/109518
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Bug report #110948: a file with a polygon so large that a single line
is 140 kilobytes. The previous limit was 64kb, increase the read file
chunk limit to 256kb. Still not fully robust, would need a more
complex fix to support arbitrarily large line length limits.
This commit allows invoking user-defined Python 'hook' functions to extend
the USD export functionality.
Added support for registering subclasses of a new bpy.types.USDHook
type which may implement the hooks as member functions. Supported
hook functions are on_export() and on_material_export(). Also added
definitions and Python registration for USDSceneExportContext and
USDMaterialExportContext structs that encapsulate arguments
to these functions.
Pull Request: https://projects.blender.org/blender/blender/pulls/108823
Sharing code with USD export, as a step towards making Hydra and USD more
consistent. Upcoming USD hooks will provide more control over material
export rather than always using preview surface.
Ref #110765
Pull Request: https://projects.blender.org/blender/blender/pulls/110836
- Use threadsafe normal computation (will be improved more in #93551)
- Copy data directly instead of loops when format is the same
- Use bke::CurvesGeometry wrapper and attribute API
- Avoid `push_back` when size is known ahead of time
This is currently meant mainly for testing, when "Developer Extras" is
enabled. The goal is to make interactive Hydra export and USD file export
identical. We are not there yet, and having the ability to compare both
in the viewport and automated tests should help us get and stay there.
Ref #110765
Hydra is a rendering architecture part of USD, designed to abstract the
host application from the renderer. A renderer implementing a Hydra
render delegate can run in any host application supporting Hydra, which
now includes Blender.
For external renderers this means less code to be written, and improved
performance due to a using a C++ API instead of a Python API.
Add-ons need to subclass bpy.types.HydraRenderEngine. See the example in
the Python API docs for details.
An add-on for Hydra Storm will be included as well. This is USD's
rasterizing renderer, used in other applications like usdview. For users
it can provide a preview of USD file export, and for developers it
serves a reference.
There are still limitations and missing features, especially around
materials. The remaining to do items are tracked in #110765.
This feature was contributed by AMD.
Ref #110765
Co-authored-by: Georgiy Markelov <georgiy.m.markelov@gmail.com>
Co-authored-by: Vasyl-Pidhirskyi <vpidhirskyi@gmail.com>
Co-authored-by: Brian Savery <brian.savery@gmail.com>
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104712
A few places already calculated vertex normals with better contextual
information to improve performance. To allow changing the storage of
vertex normals more (mostly for improved caching), change some code
from "get normals, set values, clear dirty flag" to "make vertex
normals data, give to mesh". This makes the API less awkward too,
since previously the "get for write" and "clear dirty" calls always
had to be separated.
Pull Request: https://projects.blender.org/blender/blender/pulls/110754
Add an API for armature layer access. Instead of accessing `arm->layer`
and friends directly, the code now uses this API. This will make things
easier to replace by bone collections in the future.
The functions are named "bonecoll" (short for "bone collection"), as
that's the soon-to-be-introduced replacement for armature layers. This
API is the first step towards that replacement, and should help to
reduce the changes necessary when functional changes are committed.
This also creates a new module `source/blender/animrig` for Animation &
Rigging code. This will, for example, house the bone collection system
in the near future.
There is a bunch of code currently spread across blenkernel and editors
in a rather ad-hoc way; it is intended that at some point that code gets
moved into `animrig` as well (or at least the subset of that code where
such a move makes sense; brain still required).
Ref: #108941
No functional changes.
Eventually this will need to be updated for the new Sheen in general,
but we should probably wait with that until all breaking changes for
the Principled BSDF are done.
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
