Based on feedback (thnx phase!) I found a big disadvantage of the 'real'
fresnel formula. It doesnt degrade to 0.0, causing 2-3 times too many
rays being fired compared to the previous one. So; a lot slower.
Now committed is a hybrid which allows (close to) real, and nice artistic
freedom, *and* it really goes to 0.0 and 1.0, assisting nicely in optimal
render times.
A real doc how it works (with pics) will be made before real release.
- Fixed bug in raytrace: the first renderpass didn't use fresnel for mirror.
- Fixed bug in previewrender, now it closer matches how fresnel renders
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
- added 'Mapping to" channel "RayMirror", to control mirror with texture
- fixed bug in using mirror-rgb as texture channel... this is cumbersome
because it is abused by Envmap in a not nice way. Fixing the abuse will
cause compatibility errors, which can be fixed when we up release # to
2.32.
- added "Translucency", which is nothing else than allowing another
shading pass for the backside of a face (with normal inverted). This
is interesting for all kinds of situations where you want light from
behind to 'shine through'. Also works to reduce dark areas in
unlighted parts of rendering transparent faces. Light from behind on
transparent red window should make it glowing some, right?!
- added texture channel for this as well
- Reorganized Material Panels to reveil some consistancy where buttons
can be found. Not perfect yet, but at least all options for Shaders and
options for Mirror & Transparency now are together.
This gives some space in Shader Panel for nice expansion.
- implemented tracing of transparency for shadows. This is a material
option, in the new RayTrace panel.
it only traces color and alpha, not shading. So the results of some
transparant colored unlit faces can look odd. I will look onto that.
- changed fresnel formula (got hint from eeshlo!). this simplifies the UI,
now only one button needed. The fresnel value "should" be identical as
the refraction index, but that is booooring! So i added a special fresnel
refraction slider for both mirroring and transparency. By setting all 3
sliders equal, you get 'realism'.
- fresnel for transparancy works for Ztra rendering too. Same for transpa-
rent shadow. But then you need to set 'ray' on in F10 menu.
- uploaded new monkey_glass blend in download.blender.org/demo/test/
Next stage: killing the globals from render, and implement "translucency"
which is effectively allowing faces being lit from behind, as paper or
cloth.
Changelog:
- enable refraction with button "Ray Transp" in Material buttons.
- set "Angular Index" value for amount of refraction.
- use the "Alpha" value to define transparency.
- remember to set a higher "Depth" too... glass can bounce quite some
more than expected.
- for correct refraction, 3D models MUST have normals pointing in the
right direction (consistently pointing outside).
- refraction 'sees' the thickness of glass based on what you model. So
make for realistic glass both sides of a surface.
- I needed to do some rewriting for correct mirroring/refraction,
especially to prevent specularity being blended away.
Solved this with localizing shading results in the rendercore.c.
Now specularity correctly is added, and reduces the 'mirror' value.
- Localizing more parts of the render code is being planned. The old
render heavily relies on struct Render and struct Osa to store globals.
For scanline render no problem, but recursive raytracing dislikes that.
- done test with gamma-corrected summation of colors during tracing, is
commented out still. But this will give more balanced reflections. Now
dark reflections that are reflected in a bright surface seem incorrect.
- Introduced 'Fresnel' effect for Mirror and Transparency. This
influences the amount of mirror/transparency based at viewing angle.
Next to a new Fresnel slider, also a 'falloff' button has been added to
define the way it spreads.
- Fresnel also works for Ztransp rendering
- created new Panel for Raytrace options
I have to evaluate still where it all should be logically located.
- material preview shows fake reflection and fake refraction as well.
This commit moves the 2 undefined references to BPY_interface.c and
changes things a little, hopefully fixing the problem. I had to add a new dir,
source/blender/include/ to auto*'s Makefile.am in source/blender/python/.
Thanks Chris for the report, and Jiri, for adding a missing declaration.
when an object has an Ipo, the timing for each duplicated Object is
corrected for the lifetime of particle. Looks great!
Remark: this won't work for object location (is at particle) or for
particle type 'Vect' which gives a rotation already. But now you can
scale an object small, and let it grow over time.
- add a new space: Space Script
- add a new dna struct: Script
- add these two properly everywhere they are meant to
It's not a tiny commit, but most of it is ground work for what is still to be done.
Right now the benefits should be: freeing the Text Editor to be used in a window even while a script w/ gui in "on" and letting more than one currently running script w/ gui be accessible from each window
Some files are added, so some build systems (not autotools) will need updates
This is a revision of the old NeoGeo raytracer, dusted off, improved quite
a lot, and nicely integrated in the rest of rendering pipeline.
Enable it with F10-"Ray", and set either a 'ray-shadow' lamp or give the
Material a "RayMirror" value.
It has been added for 2 reasons:
- get feedback on validity... I need artists to play around with it if it's
actually useful. It still *is* raytracing, meaning complex scenes will
easily become slow.
- for educational purposes. All raytracing happens in ray.c, which can be
quite easily adjusted for other effects.
When too many disasters pop up with this, I'll make it a compile #ifdef.
But so far, it seems to do a decent job.
Demo files: http://www.blender.org/docs/ray_test.tgz
An article (tech) about how it works, and about the new octree invention
will be posted soon. :)
Note: it doesn't work with unified render yet.
- MetaBalls/MetaElems with too small stiffness are not polygonized, but still can influence others MetaBalls/MetaElems
- better behavior of negative MetaBalls/MetaElems
Updated the Make environment to point to the correct location. The include
paths were still pointing to source/blender/bpython/include while it should be
source/blender/python.
I did not encounter the build problems because I'm always working with the
autoconf build environment.
even for each redraw! Now its all smooth & fast again.
introduced new kernel API call: int is_basis_mball(ob), this provides a
quick check of the object is the actual basis for the displaylist and
polygonization.
colors. This because of the pretty weird (ab)use of load & make editmesh...
For each added undo step, the load_editmesh was fed with an empty mesh
to assign data to, without knowledge of what was in the original mesh.
That way UV and color data got lost.
Solved it in 2 steps:
1. removing the ->tface pointer from EditVlak, and make TFace a builtin
struct inside EditVlak. This didnt cost much extra mem, since it already
stored UV and color. This enabled some pretty cleanup in editmesh.c as
well, storing tface pointers was cumbersome.
2. for each undo step, it then generates always a tface and mcol block to
link to the undo Mesh.
Even when it wasn't in the actual Mesh, at exit editmode the original
Mesh is used as reference anyway, and undo-meshes are freed correctly.
The enormous commit is because I had to change the BLI_editVert.h file, and
found it was included in about every file unnecessary. I removed it there.
ALso found out that subsurf has code ready (unfinished) to make UV coords for
the displaylist in EditMode as well, nice to know for later...
This is a temporary fix, but a complete fix will require a rewrite of of some part of the where_is_object function, and that would take too much time before 2.31.
from NaN period, someone just commented out a piece of code... this to
prevent the curve itself being converted (as edges) next to the 3d filled
faces. but for 3D curves there are no filled faces.
reason: mixbuffer size was not correctly initialized in .blend. Doing this
for struct UserData has some extra quirks, so better not do it with
checking for version (if version<2.27 etc) but always (if U.mix==0 etc).
I mail this to committers list as well.
standard starts with 0.5 sec. Turn the threshold value up to effectively
disable it when you dislike it. But give it a try!
- added 'Home' after splitting window for buttonswindow
- subsurf also smoothed loose vertices, in a strange way that never showed
up until 'draw subsurf handles' was implemented.
fixed subsurf code not to include loose vertices anymore
- saving a file in editmode caused a new displaylist to made... fixed an
old bad hack from NaN period.
(displists are still lousy code...)
- fixed drawing vertices in frontbuffer on select.
the delay you see is because blender waits for 'rightmouse transform'.
Aim was to find a simple & easy system, script alike, to add and configure
a toolbox system, so that others can experiment, but also of course Python.
Summary:
- spacebar calls it up. SHIFT+A still does old toolbox
- hold left or rightmouse for 0.4 second, and it pops up as well
this is experimental! Can be tweaked with Userdef var "ThresA"
- it is a little bit complete for Object mode only. Needs still work
at information desing/structure level
- the code works like an engine, interpreting structs like this:
static TBitem addmenu_curve[]= {
{ 0, "Bezier Curve", 0, NULL},
{ 0, "Bezier Circle", 1, NULL},
{ 0, "NURBS Curve", 2, NULL},
{ 0, "NURBS Circle", 3, NULL},
{ 0, "Path", 4, NULL},
{ -1, "", 0, do_info_add_curvemenu}};
- first value is ICON code,
- then name
- return value
- pointer to optional child
last row has -1 to indicate its the last...
plus a callback to event function.
I also built an old toolbox style callback for this:
static TBitem tb_object_select[]= {
{ 0, "Border Select|B", 'b', NULL},
{ 0, "(De)select All|A", 'a', NULL},
{ 0, "Linked...|Shift L", 'L', NULL},
{ 0, "Grouped...|Shift G", 'G', NULL},
{ -1, "", 0, tb_do_hotkey}};
here the return values are put back as hotkeys in mainqueue.
A mainloop can do all context switching, and build menus on the fly.
Meaning, it also allows other designs such as radials...
This is done by disabling the object position refresh call when calculating these constraints. From the tests I did, this doesn't cause any problem at all.
The main point of this is to create pistons and the like.
For coders:
the detect_constraint_loop function now takes an additional parameter that determines the constraint type of the object it's looping from.
instead of the old 'septex' which only showed the active one
- rendering: the 'stencil' option now works to stencil out normals as well
(special requests from our manual master, s68)
- transparent faces in editmode don't write in zbuffer anymore (prevents
drawing errors) but still read (so behind the subsurf faces for example)
- improved drawing 'handles' for subsurf editing
- going in editmode to Solid view, will draw extra wire always, including
transparent faces when set
- works in all combos... http://www.blender.org/docs/ton/subsurf.html
- fixed error; padplus/padminus didnt work in buttonswindow anymore
- improved buttonswin: when dragging window edge, the buttons dont
rescale, but stay same size
- in zbuffer mode, vertices will be blended 50% in... and when you increase
vertex size larger than 2 pixels, it will draw them smaller
- removed all 'wire extra' calls (there were dozens!) and replaced it with
simple call where it belongs.
This drawing mode is becoming nice & stable... maybe something to make
default on for new objects? Makes selecting quite easier...
- Subsurf: in editmode, with new 'Optimal' option set, the mesh itself
will not draw, but instead it draws 'handles' to the vertices. Looks
extremely clean!
- matched drawing of default grid-floor (persp) to ortho grid
- killed drawing vertices outside of main drawing loop, apart from the
routine that uses mouse-selecting. (tekenvertices_ext()). It was an old
optimize routine which became quite useless.
Axis options for TrackTo
LockTrack
FollowPath
Auto creation of TrackTo constraint from Ctrl-T (old track still an option)
Auto creation of FollowPath when parenting to path (Normal parent still an option)
Backward compatibility stuff to convert the per object axis settings to per constraint when a Track constraint is present.
Function to convert old track to constraint (commented out)
Revamped the constraints interface with Matt's work from tuhopuu and the stuff we were discussing earlier.
--------------------
For coders:
unique_constraint_name and *new_constraint_data moved to the kernel (constraint.c)
new Projf function in arithb gives the projection of a vector on another vector
add_new_constraint now takes a constraint type (int) parameter
add_constraint_to_object(bConstraint *con, Object *ob) to link a constraint to an object
add_constraint_to_client(bConstraint *con) to link constraint to current client (object or bone)
add_influence_key_to_constraint (bConstraint *con) to (eventually) add a keyframe to the influence IPO of a constraint
can be found under the 'SubSurf' button.
Optimal drawing only shows the subdivided original edges. Quite nice!
And; it's a load faster!
- to evaluate: do we want this in editmode too?
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
- Converted lamp buttons and world buttons, they're pretty!
- menu auto open now is user preset, including 2 thresholds you can set
- hilites of pulldown menus were not cleared, fixed
- changed F4 key to logic. F5 will show lamp buttons, when lamp active
- in 'shader context' buttons, clicking camera will show world
EEEK! It doesn't look well yet! Hopefully it inspires others to come
with great solutions.
- the material buttons have 6 panels, three of them merged
- some drawing errors in preview render
- made settings for new Material that makes sense for Flares
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
Multiple environments now can be rendered in one pass. Previously the other objects with environment maps didn't show up in a reflection. Like this:
http://www.blender.org/bf/dep.jpg
By default, Blender renders now this result:
http://www.blender.org/bf/dep0.jpg
For a further 'recursive ray-tracing effect' you can give each EnvMap texture a higher "Depth" value. Here is a result with depth set at '2':
http://www.blender.org/bf/dep2.jpg
Related new options:
- in (F10) DisplayButtons, environment map rendering can be turned on and off.
- in EnvMap texture buttons you can free all environment maps
- Environment map sizes are also reduced with the (F10) 'percentage' option.
Tech note: with this commit the VlakRen struct has on *ob pointer!
- added new MetaElem types (plane, elipsoid and cube) old TubeX, TubeY and TubeZ will not be supported
- new buttons in Edit button window (dx, dy, dz)
- added new items into the headers menu and toolbox menu
more details at: http://blender.webpark.cz
