Rename the `bPoseChannel::flag` `PCHAN_HAS_TARGET` to `PCHAN_HAS_NO_TARGET`
as that is actually the meaning of the flag (in the majority of the code).
Since the flag was so confusingly named, there were some mixups in the
armature overlay drawing code as well, which have been fixed now too.
When removing all constraints from pose bones, just reset the `constflag`
field to `0`, instead of clearing out specific flags. It was already
missing a flag that should have been cleared.
Effectively no functional changes, just a nice cleanup.
Use the same icon as in the asset browser "unassigned" item for
unassigned node group assets exposed in the modifier or node
add menus, helping to make the connection to the asset browser.
The downside is potentially drawing unnecessary attention to these
categories, but ideally they won't exist for most users anyway (since
the assets should be in proper catalogs).
After discussion with module members, it was agreed that "Unassigned"
was better because the word is already used in the asset browser, and
because it sounds more natural.
Instead of adding the default "Bones" bone collection to every Armature
data-block, only add it for Armatures that are added in the 3D View with
Shift+A > Armature.
This simplifies things like importers, which otherwise would have needed
to remove that default collection before creating the imported ones.
Additionally, this also ensures that the one bone you get by default is
actually assigned to the default bone collection.
When clearing the parent of an object that has keys,
the object position jumped back to world space immediately.
This didn't allow for keying the current position
and was inconsistent with setting a parent.
This PR fixes it by not instantly re-evaluating the animation.
Pull Request: https://projects.blender.org/blender/blender/pulls/112670
Notifiers was sent to outliner for redraw but outliner was out of sync
due to missing flag which is required for syncing.
This will correctly set the select/active outliner element flags with
the help of Base in `outliner_select_sync_from_object`. So correct active
tree element will be highlighted in `outliner_draw_highlights`
Pull Request: https://projects.blender.org/blender/blender/pulls/112370
In the add modifier menu, 3D viewport menus for node tools, and the node
editor add menu, assets not in catalogs are added to an "No Catalog"
menu rather than not being accessible at all.
This makes the default behavior when adding a node tool "not broken"
so at least something happens by default. The question of "How do I
add a catalog?" is much better than "Why didn't anything happen?"
Implements #111529
See #101778
---
Pull Request: https://projects.blender.org/blender/blender/pulls/112355
Calling an API function after the node panels patch does not internally
tag the node tree with `NTREE_CHANGED_INTERFACE` any more, because the
node tree is not directly accessible from `bNodeTreeInterface`. Before
node panels the API functions for interfaces could tag the tree directly
for later update consideration, which now requires explicit tagging
calls.
The fix is to add a flag and mutex directly to `bNodeTreeInterface`, so
API methods can tag after updates. This mostly copies runtime data
concepts from `bNodeTree`. The `ensure_interface_cache` method is
equivalent to `ensure_topology_cache` and should be called before
accessing `interface_inputs` and similar cache data.
Pull Request: https://projects.blender.org/blender/blender/pulls/111741
The issue was that Armatures have their own edit-mode undo system, but it
didn't account for bone collections yet.
The solution implemented here is to also copy the list of BoneCollections
in each edit-mode undo step, just like EditBones themselves already are.
Additionally, the undo EditBones now have their bone collection membership
remapped to point at those undo copies, so that the entire undo step is
self-contained.
When restoring from an undo step, we simply do the reverse: copy all of
the EditBones and BoneCollections back to the actual armature, and remap
the EditBone collection membership appropriately.
This patch also includes a temporary workaround for a final issue, where
BoneCollection membership information could be lost when undoing pops you
out of edit mode. The correct solution for this is a bit involved, and
will be part of a future PR. But the workaround ensures that things
aren't broken in the mean time.
Pull Request: https://projects.blender.org/blender/blender/pulls/111965
OBJECT_OT_object_join does not seem to use any screen/window during its
execution. Removing the relevant poll code so it makes it easier to run
this operator in the background.
Pull Request: https://projects.blender.org/blender/blender/pulls/112244
When duplicating the node group from the geometry node editor, show the
data-block selector in the modifier interface. Otherwise it's not clear
that the modifier is using a local data-block, not the original asset.
When adding modifiers from assets in the new modifier menu, switching
the node group the modifier uses afterwards will not be common. The goal
is to replace the builtin modifier directly. In that case it's easier to
just add a new modifier. The "Empty Modifier" item makes it easy to
choose an arbitrary node group anyway.
Combined with hiding the two sub-panels when they are unnecessary,
many node-modifiers will look just as clean as their builtin counterparts.
The option to show the data-block selector is added to the menu
in the node header so it's still accessible though.
Pull Request: https://projects.blender.org/blender/blender/pulls/111995
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
Implements part of #111538.
Change the modifier add button to create a menu with submenus.
Extend the submenus dynamically with geometry node group assets.
This makes it much simpler to share and use custom modifiers.
Node groups get a new "Is Modifier" property, which is controllable
in a popover in the node editor header when the group is an asset.
The built in modifier can be rearranged in different categories in
a next step. For now the existing organization is used, except for
the geometry nodes modifier, which is called "Empty Modifier" and
put in the root menu.
The changes in !110855 and !110828 will be important to improve
interaction speed with the new UI. Those are planned for 4.0 as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/111717
The main goal here is to rename things in a way that makes sense for
simulation baking, but also for the upcoming bake node.
This also removes some versioning code from 3.6 which initialized the
default bake path. Baked data from back then can't be loaded anymore
anyway, and the way the default path is generated is different now as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/111845
Blob stands for "binary large object" and is a known term. I used to use the term `bdata`
to mean "binary data", mainly because I didn't think of a better name. Blob is a much
better name as it captures the intend of those files much better.
This change breaks existing bakes, because I rename the folder from `bdata` to `blobs`.
I think that is ok, because I also just broke bakes two days ago in a larger refactor
(e92c59bc9b).
Pull Request: https://projects.blender.org/blender/blender/pulls/111822
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
`BKE_simulation_state_serialize.hh` is not necessary anymore,
because the serialization is done at a lower level.
The functionality that lived there in the past is now part of
`BKE_bake_items_serialize.hh`.
Goals of the refactor:
* Internal support for baking individual simulation zones (not exposed in the UI yet).
* More well-defined access to simulation data in geometry nodes. Especially, it
should be more obvious where data is modified. A similar approach should also
work for the Bake node.
Previously, there were a bunch of simulation specific properties in `GeoNodesModifierData`
and then the simulation input and output nodes would have to figure out what to do with that
data. Now, there is a new `GeoNodesSimulationParams` which controls the behavior of
simulation zones. Contrary to before, different simulation zones can now be handled
independently, even if that is not really used yet. `GeoNodesSimulationParams` has to be
subclassed by a user of the geometry nodes API. The subclass controls what each simulation
input and output node does. This some of the logic that was part of the node before, into
the modifier.
The way we store simulation data is "transposed". Previously, we stored zone data per
frame, but now we store frame data per zone. This allows different zones to be more
independent. Consequently, the way the simulation cache is accessed changed. I kept
things simpler for now, avoiding many of the methods we had before, and directly
accessing the data more often which is often simple enough. This change also makes
it theoretically possible to store baked data for separate zones independently.
A downside of this is, that existing baked data can't be read anymore. We don't really
have compatibility guarantees for this format yet, so it's ok. Users will have to bake again.
The bake folder for the modifier now contains an extra subfolder for every zone.
Drawing the cached/baked frames in the timeline is less straight forward now. Currently,
it just draws the state of one of the zones, which usually is identical to that of all other
zones. This will change in the future though, and then the timeline drawing also needs
some new UI work.
Pull Request: https://projects.blender.org/blender/blender/pulls/111623
Part 3/3 of #109135, #110272
Switch to new node group interfaces and deprecate old DNA and API.
This completes support for panels in node drawing and in node group
interface declarations in particular.
The new node group interface DNA and RNA code has been added in parts
1 and 2 (#110885, #110952) but has not be enabled yet. This commit
completes the integration by
* enabling the new RNA API
* using the new API in UI
* read/write new interfaces from blend files
* add versioning for backward compatibility
* add forward-compatible writing code to reconstruct old interfaces
All places accessing node group interface declarations should now be
using the new API. A runtime cache has been added that allows simple
linear access to socket inputs and outputs even when a panel hierarchy
is used.
Old DNA has been deprecated and should only be accessed for versioning
(inputs/outputs renamed to inputs_legacy/outputs_legacy to catch
errors). Versioning code ensures both backward and forward
compatibility of existing files.
The API for old interfaces is removed. The new API is very similar but
is defined on the `ntree.interface` instead of the `ntree` directly.
Breaking change notifications and detailed instructions for migrating
will be added.
A python test has been added for the node group API functions. This
includes new functionality such as creating panels and moving items
between different levels.
This patch does not yet contain panel representations in the modifier
UI. This has been tested in a separate branch and will be added with a
later PR (#108565).
Pull Request: https://projects.blender.org/blender/blender/pulls/111348
- Multiple issues in the Data Transfer modifier error messages:
- "None" -> "none", this word in the middle of a sentence, no need
for upper case.
- "amount of <element>" -> "number", more appropriate for discrete
counts.
- "doesn't" -> "does not", to respect Blender's style guide.
- "The grease pencil object need an Armature modifier" -> "needs",
grammar.
- "Armature modifier is not valid or wrong defined" -> "is invalid".
Unclear what "wrong defined" means.
- The "Recent Reports" text block has not been used since 2.81.
- "Not valid subdivisions found to rebuild lower levels" -> "No
valid...", typo.
- "extensions repository" -> "extension repository": typo.
- "... , but loose correct blending..." -> "lose": typo.
- "True when multiple enums ": trailing whitespace.
- "Number of ray per pixel" -> "rays": typo.
- "Curve Parameter node" -> "Spline ...": this is the actual name of
the node after its rename in 1cd9fcd98d.
Pull Request: https://projects.blender.org/blender/blender/pulls/111145
Armature layers (the 32 little dots) and bone groups are replaced with
Bone Collections:
- Bone collections are stored on the armature, and have a name that is
unique within that armature.
- An armature can have an arbitrary number of bone collections (instead
of the fixed 32 layers).
- Bones can be assigned to zero or more bone collections.
- Bone collections have a visibility setting, just like objects in scene
collections.
- When a bone is in at least one collection, and all its collections in
are hidden, the bone is hidden. In other cases (in any visible
collection, or in no collection at all), the bone visibility is
determined by its own 'hidden' flag.
- For now, bone collections cannot be nested; they are a flat list just
like bone groups were. Nestability of bone collections is intended to
be implemented in a later 4.x release.
- Since bone collections are defined on the armature, they can be used
from both pose mode and edit mode.
Versioning converts bone groups and armature layers to new bone
collections. Layers that do not contain any bones are skipped. The old
data structures remain in DNA and are unaltered, for limited forward
compatibility. That way at least a save with Blender 4.0 will not
immediately erase the bone group and armature layers and their bone
assignments.
Shortcuts:
- M/Shift+M in pose/edit mode: move to collection (M) and add to
collection (shift+M). This works similar to the M/Shift+M menus for
objects & scene collections.
- Ctrl+G in pose mode shows a port of the old 'bone groups' menu. This
is likely to be removed in the near future, as the functionality
overlaps with the M/Shift+M menus.
This is the first commit of a series; the bone collections feature will
be improved before the Blender 4.0 release. See #108941 for more info.
Pull request: https://projects.blender.org/blender/blender/pulls/109976
This was noted in code comments and checked in Python documentation
generation but not at build time.
Since these enums are identifiers that end up included in various places
enforce the `rna_enum_*_items` convention which was noted as
the convention but not followed strictly.
Partially reverts [0], avoids having to deal with multiple prefix types.
[0]: 3ea7117ed1
The code ensuring that an object (or obdata) is not made local if it is
used by linked data that is not tagged to be made local was blatantly
buggy, leading to over-detecting such cases.
Note that this code remains fairly fragile imho, think the whole Main
data-base of IDs should be checked, other data-types than Objects can
use objects! But this is for another day.
When copying (CTRL+L->Animation Data) a driver between two objects
that are linked with library overrides, `AnimData` was not created.
This did crash Blender when it tried to use the `nullptr`
The reason it crashed is because the function
`DEG_id_tag_update()`
was never called.
Fix it by restructuring the code so the function gets called
Pull Request: https://projects.blender.org/blender/blender/pulls/110795
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
With the end goal of simplifying ownership and memory management,
and allowing the use of `get_name` in contexts without statically
allocated strings, use `std::string` for the return values of these two
operator type callbacks instead of `const char *` and `char *`.
In the meantime things get uglier in some places. I'd expect `std::string`
to be used more in the future elsewhere in Blender though.
Pull Request: https://projects.blender.org/blender/blender/pulls/110823
