This reduces the API and make it more clear where there
is the global access.
This also removes some of these global access by merging
the `DRW_context_get()` calls.
This removes the old `DrawEngineType` and use the new `DrawEngine`
virtual class instead.
This removes a lot of boilerplate functions that were only there for
legacy reason.
To this end, some engines that were based on static functions have been
refactored into `Instance` classes. This was particularly cumbersome
for the Grease pencil engine which needed some more refactoring.
The `Engine` class that is in each namespace is a workaround to isolate
the internal implementation (i.e. the `Instance`) to the engine
modules. Without this, the whole engine is getting included in each
compile unit that includes the `Instance` class. Eventually, if we get
rid of these intricate dependencies, we could remove the `Engine` class.
Pull Request: https://projects.blender.org/blender/blender/pulls/136001
This refactor part of `draw_manager_c.cc` to make it more understandable
and less bug prone.
- Splits the context handing to `draw_gpu_context.cc`
- Rename `draw_manager_c.cc` to `draw_context.cc`
- Merge `DRWContextState` into `DRWContext`
- Merge lots of static functions into `DRWContext` to avoid global access
- Deduplicate code between entry point functions
- Move context init logic to `DRWContext` constructor
- Move resource init logic to `DRWContext::acquire_data`
- Move extraction `TaskGraph` out of `DRWContext`
- Reduce / centralize complexity of enabling draw engines
- Reduce the amount of `drw_get` calls
- Remove unused code
Pull Request: https://projects.blender.org/blender/blender/pulls/135821
This removes the use of `system_gpu_context_mutex`
which was making render command submission threadsafe.
The only issue is the concurent usage of GPUShader objects.
To fix this, we only guard the submission section which
are the only parts that uses the GPUShaders.
Removing this critical section all together requires some changes
in the GPUShader. See #135406
Rel #134690
Pull Request: https://projects.blender.org/blender/blender/pulls/135595
This avoid having to flush explicitely and the need for syncing.
It also removes a lot of complexity in the process.
These updates are not granular and do not need to so much
boiler plate code.
The depsgraph update counter now becomes atomic to avoid
undefined behavior when a depsgraph is being destroyed and
its memory reused (same thinking as the non-copy-on-eval IDs).
I tested some use cases (object update, sculpt update,
shading update) and they are all working.
Pull Request: https://projects.blender.org/blender/blender/pulls/135580
Move the `StaticShader` class from Workbench to `GPU_shader` and make
compilation thread-safe (Shader usage is still not thread-safe).
Use `StaticShader`s for all shader caches.
Subdivision shaders are still not ported.
(Part of #134690)
Pull Request: https://projects.blender.org/blender/blender/pulls/134812
Move the code dealing with converting float3 to GPU normals
out of the vertex format header into a separate header. Use a
proper C++ namespace and remove duplication by only using
the more recently added C++ templated conversions.
Most of the diff comes from the removal of the indirect includes
from GPU_vertex_format.hh. A lot of files ended up mistakenly
depending on that.
Pull Request: https://projects.blender.org/blender/blender/pulls/134873
Though "Point Cloud" written as two words is technically correct and should be used in the UI, as one word it's typically easier to write and parse when reading. We had a mix of both before this patch, so better to unify this as well.
This commit also renames the editor/intern/ files to remove pointcloud_ prefix.
point_cloud was only preserved on the user facing strings:
* is_type_point_cloud
* use_new_point_cloud_type
Pull Request: https://projects.blender.org/blender/blender/pulls/134803
The core issue was that the geometry batch cache (e.g. `MeshBatchCache` or
`PointCloudBatchCache`) was dependent on the object. This is problematic when
the the same geometry is used with multiple different objects because the cache
can't be consistent with all of them.
Fortunately, the only thing that was retrieved from the object was the number of
material slots, so if that can be avoided we should be fine. We can't just use
the number of material slots stored on the geometry because that may have no
material slots but still has material indices which are overridden on the object
level.
The solution is to take make the number of materials for a geometry only
dependent on the actual `material_index` attribute and not on the number of
available slots. More specifically, we find the maximal referenced material
index and handle that many materials. This number does not depend on how many
material slots there are on the object, but it still allows the object to
override materials slots that the mesh references.
A downside is that the maximum material index has to be computed which often
requires an iteration over the mesh. Fortunately, we can cache that quite easily
and the computation can be done in parallel. Also we are probably able to
eagerly update the material index in many cases when it's set instead of
computing it lazily. That is not implemented in this patch though.
The largest part of the patch is making the maximal material index easily
available on all the geometry types. Besides that, the material API is slightly
replaced and the drawing code now makes use of the updated API.
Pull Request: https://projects.blender.org/blender/blender/pulls/133498
Especially through DRW_render.hh, there were a lot of unnecessary
includes almost everywhere in the module. This typically makes
dependencies less explicit and slows down compile times, so switch
to including what files actual use.
Pull Request: https://projects.blender.org/blender/blender/pulls/133450
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
When using clangd or running clang-tidy on headers there are
currently many errors. These are noisy in IDEs, make auto fixes
impossible, and break features like code completion, refactoring
and navigation.
This makes source/blender headers work by themselves, which is
generally the goal anyway. But #includes and forward declarations
were often incomplete.
* Add #includes and forward declarations
* Add IWYU pragma: export in a few places
* Remove some unused #includes (but there are many more)
* Tweak ShaderCreateInfo macros to work better with clangd
Some types of headers still have errors, these could be fixed or
worked around with more investigation. Mostly preprocessor
template headers like NOD_static_types.h.
Note that that disabling WITH_UNITY_BUILD is required for clangd to
work properly, otherwise compile_commands.json does not contain
the information for the relevant source files.
For more details see the developer docs:
https://developer.blender.org/docs/handbook/tooling/clangd/
Pull Request: https://projects.blender.org/blender/blender/pulls/132608
Depth of field attaches the half res and scene color texture, but
doesn't provide the correct usage flags. This resulted in validation
errors in Metal & Vulkan.
Pull Request: https://projects.blender.org/blender/blender/pulls/131655
Workbench shaders uses one fragment shaders, but uses different
resources based on the step of the effect. This failed in vulkan as all
defined resources should be found. This PR separates the steps in its
own fragment shader and adds sampler binding per step.
- Removed the max coc input texture as it wasn't used.
- Removed the background texture as it wasn't used.
- Renumbered the resources.
Pull Request: https://projects.blender.org/blender/blender/pulls/131606
