No behavioral changes are expected here.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This will be used by the copy/paste code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
When appended collections are instantiated in viewlayers, do not add to
viewlayers collections children of other instantiated collections.
This default behavior is required for proper copy/paste behavior. If
previous behavior needs to be brought back for regular append operation,
this can be decided and done, but think this default behavior also makes
sense in normal append case.
part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
Unfortunately the drop logic for file-path based drag & drop checks the
used icon for its logic. This is very bad and should be changed. But
doing this involves some changes that are better not done during bcon4,
so for now stick to it and update the icon check.
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D13383?id=45314
When adding `INSERT` operations over RNACollection items, rna diffing
code did not properly report the properties as not being equals.
This in turn triggered the 'purge unused exiting override properties'
mechanism, thus deleting the exitsting (valid) insert override property
operation.
NOTE: This should also be backported to 2.93, and probably 2.83.
Reviewed By: sybren, jbakker
Maniphest Tasks: T93353
Differential Revision: https://developer.blender.org/D13426
The default snap behavior to perform on tools and cursors is to the
final geometry and not edited geometry.
In snapping to edited geometry, there are some specific behaviors that
are not convenient in some cases. For example the general occlusion
test of X-Ray geometries during dragdrop.
This fix also resolves a regression for tools like measure and placement
that were also ignoring the snap to face in x-ray mode.
Differential Revision: https://developer.blender.org/D13410
Note that this fully replaces the 'PyCapsule' storage of linked/appended items
in the python API code by the generic storage of items in the
`BlendfileLinkAppendContext` data.
Maniphest Tasks: T91414
Differential Revision: https://developer.blender.org/D13331
- Rename the Curve Parameter node to Spline Parameter.
- Add "Index on Spline" to the node. This output is the index of
the current point on it's parent spline rather than the entrire curve.
Differential Revision: https://developer.blender.org/D13275
The `ASSET_OT_bundle_install` operator only works when the blend file is
self-contained. It reports any external dependencies. Before this patch:
- every dependency was mentioned, even when it repeated the same
filename over and over again, and
- multiple dependencies were all mentioned in the error popup,
potentially filling the screen.
This is now resolved by:
- only reporting each external file once, and
- referring to the console when there are multiple external dependencies.
Reviewed by: severin, dfelinto
Differential Revision: https://developer.blender.org/D13413
`file.select()` wasn't handling redirects as it should when it also
opens directories. This was only uncovered by a change in the keymap.
Reviewed By: Bastien Montagne, Harley Acheson
Differential Revision: https://developer.blender.org/D13388
Combined view of timeline and preview causes seemingly unpredictable
behavior after some operators have been allowed to run in preview
region.
Disable new features in this combined view, so behavior should be
consistent with previous versions.
ref: https://developer.blender.org/T92584
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D13419
Add flag to `BKE_bpath_traverse_id()` and friends to skip weak
references (see below). This makes a distinction between "this blend
file depends on that file" and "this blend file references that file,
but doesn't directly use its data". This distinction is for the Asset
Bundle install operator, which refuses to copy the blend file when it's
not self-contained.
Weak references are those that are not directly used by the blend file,
but are still present to allow path rewriting. For example, when an
Asset is loaded its originating blend file is saved in
`ID::library_weak_reference`; this reference is purely for deduplication
purposes, and not for actually loading any data.
Reviewed by: mont29, brecht
Differential Revision: https://developer.blender.org/D13412
If strip is removed while proxy is built, this causes crash when
building is finished. This happens because proxy anims are freed in
`SEQ_proxy_rebuild_finish()`.
Iterate over available strips and check if original strip still exists
by comparing `SessionUUID`.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13408
It's important the coordinates the knife is operating on are never
manipulated since it will cause problems which are difficult to
troubleshoot.
Instead, use a cast in the MEM_freeN(..) call.
This reverts commit 8600d4491f.
The Domain Size node has a single geometry input and a selection for
the component type. Based on the component chosen, outputs containing
single values for the related domains are shown.
Mesh:
- Point Count
- Edge Count
- Face Count
- Face Corner Count
Curve:
- Point Count
- Spline Count
Point Cloud:
- Point Count
Instances:
- Instance Count
Differential Revision: https://developer.blender.org/D13365
The crash was caused by allocating an uninitialized amount of memory.
This fix initializes a bunch of variables that could cause the error.
It should be possible to also fix this in the function that actually uses
the uninitialized memory, but that could cause unknown consequences
that are a bit too risky for 3.0. Just initializing some variables should
be safe though. For more details see D13369.
Differential Revision: https://developer.blender.org/D13369
The are few things in the dependency graph which lead to the issue:
- IDs are only built once.
- Object-data level (Armature, i,e,) builder dependent on the object
visibility.
This caused issues when an armature is first built as not directly
visible (via driver, i.e.) and then was built as a directly visible.
This did not update visibility flag on the node for the custom shape
object.
The idea behind the fix is to go away form passing object visibility
flag to the geometry-level builders and instead rely on the common
visibility flush post-processing to make sure certain objects are
fully visible when needed.
This is the safest minimal part of the change for 3.0 release which
acts as an additional way to ensure visibility. This means that it
might not be a complete fix (if some configuration was overseen) but
it should not make currently working cases to not work.
The fix should also make modifiers used on rigify widgets to work.
The more complete fix will have `is_object_visible` argument removed
from the geometry-level builder functions.
Differential Revision: https://developer.blender.org/D13404
Regression since 3.93 caused by 752c6d668b.
Follow the code from 2.93 which was always leaving curve modifiers
evaluation with a valid and clean state of the bounding box.
This is also what was proposed and agreed on in the following
design task: T92206: Bounding Box: compute during depsgraph evaluation
Tested with files from T90808 and T93384.
For the 3.0 going with the safest and minimal change. The rest of
the bounding box un-entanglement is to happen outside of the stable
branch.
Thanks The patch is based on the code from Philipp Oeser and
investigation by Germano Cavalcante and Dr. Sybren A. Stüvel,
thanks!
Differential Revision: https://developer.blender.org/D13409
This patch adds MetalRT support to Cycles kernel code. It is mostly additive in nature or confined to Metal-specific code, however there are a few areas where this interacts with other code:
- MetalRT closely follows the Optix implementation, and in some cases (notably handling of transforms) it makes sense to extend Optix special-casing to MetalRT. For these generalisations we now have `__KERNEL_GPU_RAYTRACING__` instead of `__KERNEL_OPTIX__`.
- MetalRT doesn't support primitive offsetting (as with `primitiveIndexOffset` in Optix), so we define and populate a new kernel texture, `__object_prim_offset`, containing per-object primitive / curve-segment offsets. This is referenced and applied in MetalRT intersection handlers.
- Two new BVH layout enum values have been added: `BVH_LAYOUT_METAL` and `BVH_LAYOUT_MULTI_METAL_EMBREE` for XPU mode). Some host-side enum case handling has been updated where it is trivial to do so.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13353
This patch adds new arg-type parameters to `DeviceQueue::enqueue` and its overrides. This is in preparation for the Metal backend which needs this information for correct argument encoding.
Ref T92212
Reviewed By: brecht
Maniphest Tasks: T92212
Differential Revision: https://developer.blender.org/D13357
Make `ED_preview_id_is_supported(ID *)` NULL-safe. It's semantically
valid, as it's not possible to render a preview of a NULL ID.
The crash was introduced in 481f032f5c
Reviewed By: sybren, jbakker
Maniphest Tasks: T93431
Differential Revision: https://developer.blender.org/D13398
