This happens if the Wavelength is set to 0.0f.
Not sure if we really need a do_version patch for old files, as an
alternative we could also force a slight offset in the
SinusDisplacementShader. This patch does not do either, just force a
positive range from now on.
Maniphest Tasks: T93322
Differential Revision: https://developer.blender.org/D13329
21.Q4 is required, older version should not show devices in the preferences.
This adds a check for the file version of amdhip64.dll file during hipew
initialization.
Differential Revision: https://developer.blender.org/D13324
This was just a typo in {rBb408d8af31c9}
Must be 'MINIMUM' (instead of 'MININUM').
Maniphest Tasks: T93320
Differential Revision: https://developer.blender.org/D13328
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
This puts all static functions in geometry node files into a new
namespace. This allows using unity build which can improve
compile times significantly (P2578).
* The name space name is derived from the file name. That makes
it possible to write some tooling that checks the names later on.
The file name extension (`cc`) is added to the namespace name as
well. This also possibly simplifies tooling but also makes it more
obvious that this namespace is specific to a file.
* In the register function of every node, I added a namespace alias
`namespace file_ns = blender::nodes::node_geo_*_cc;`. This avoids
some duplication of the file name and may also simplify tooling,
because this line is easy to detect. The name `file_ns` stands for "file
namespace" and also indicates that this namespace corresponds to
the current file. In the beginning I used `node_ns` but `file_ns` is more
generic which may make it more suitable when we want to use unity
builds outside of the nodes modules in the future.
* Some node files contain code that is actually shared between
different nodes. For now I left that code in the `blender::nodes`
namespace and moved it to the top of the file (couldn't move it to
the bottom in all cases, so I just moved it to the top everywhere).
As a separate cleanup step, this shared code should actually be
moved to a separate file.
Differential Revision: https://developer.blender.org/D13330
Currently the geometry nodes evaluator always stores a field for every
type that supports it, even if it is just a single value. This results in a lot
of overhead when there are many sockets that just contain a single
value, which is often the case.
This introduces a new `ValueOrField<T>` type that is used by the geometry
nodes evaluator. Now a field will only be created when it is actually
necessary. See D13307 for more details. In extrem cases this can speed
up the evaluation 2-3x (those cases are probably never hit in practice
though, but it's good to get rid of unnecessary overhead nevertheless).
Differential Revision: https://developer.blender.org/D13307
This changes what domain is used by the raycast mode. This should fix the
behavior for face corner attributes (but may make it a bit slower for other
attributes). I think for 3.0 this is an acceptable trade off. For 3.1 we can do
what the comment suggests already.
Differential Revision: https://developer.blender.org/D13333
The problem was that we forgot to actually remove the vertex group when
it should be deleted. We only removed all the data that was attached to it.
Differential Revision: https://developer.blender.org/D13326
rB33c5e7bcd5e5b79 doversion code was incorrectly dealing with 'insert in
first position' case from older blendfiles.
Specifically, a NULL anchor is valid (it means that the new item is the
first of the stored override data, and should be inserted at start of
the list).
Reported as part of T93321.
The Blender icon must not be used to refer to anything that is not
Blender itself. Using the Blender icon on its own to refer to .blend
files or the currently open file is a no-go, which was brought up by
Ton.
This does the following changes to the icon file:
* Add new "Current File" icon
* Change the .blend file icon to contain a file icon with the Blender
logo, but not merely the Blender logo.
* Change the backup .blend file icon accordingly.
The new "Current File" icon is used in the Asset Browser, but
could/should be used in the Outliner as well. That needs more design
discussion though.
Add an operator "Copy to Asset Library" for installing asset bundles
into already-existing asset libraries.
The operator is shown when:
- the "Current File" library is selected,
- the blend file name matches `*_bundle.blend`, and
- the file is not already located in an asset library.
The user can select a target asset library, then gets a "Save As"
dialogue box to select where in that library the file should be saved.
This allows for renaming, saving in a subdirectory, etc.
The Asset Catalogs from the asset bundle are merged into the target
asset library.
The operator will refuse to run when external files are referenced. This
is not done in its poll function, as it's quite an extensive operator
(it loops over all ID datablocks).
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13312
This enables calling code to deal with the blendfile handle themselves,
BKE_blendfile_link then just borrows, uses this handle and does not
release it.
Needed e.g. for python's libcontext system to use new
BKE_blendfile_link_append code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This enables calling code to deal with the blendfile handle themselves,
BKE_blendfile_link then just borrows, uses this handle and does not
release it.
Needed e.g. for python's libcontext system to use new
BKE_blendfile_link_append code.
Part of T91414: Unify link/append between WM operators and BPY context
manager API, and cleanup usages of `BKE_library_make_local`.
This was broken by rB0c3b215e7d5456878b155d13440864f49ad1f230.
The caching of loaded exr files needed some special treatment.
Differential Revision: https://developer.blender.org/D13313
This was probably broken by rB5c2330203e11e0d916960218b07d88d2193bf526.
For now just add the padding back in a spreadsheet specific way.
Differential Revision: https://developer.blender.org/D13315
There was a missing normals layer that was requested by the data transfer
modifier from the target object. The normal layer was correctly added to
the target object. However, it never reached the data transfer modifier
because the mesh was copied in `BKE_object_get_evaluated_mesh`
(in the call to `get_mesh_for_write`) and the copy does not include the normals
layer.
The solution is to not use `get_mesh_for_write` here which was only used
because `BKE_object_get_evaluated_mesh` returns a non-const `Mesh *`.
Mid term, it should actually return a `const Mesh *` to avoid the confusion.
Differential Revision: https://developer.blender.org/D13319
For some users, dropping assets into preview area may be more practical
due to space constraints or it may be just more intuitive.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13311
For using the Outliner and/or the Asset Browser as scene independent
tools to organize a/v source material is necessary for the users to be
able to drag and drop data blocks into the VSE. This was also an
unfulfilled design target for the Outliner Gsoc project.
Datablocks won't be used directly. Path to file will be passed to strip
add operator instead.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D13304
Use the correct device function (hipDeviceGet) for multi GPU setups, instead
of hipGetDevice which just returns the default device.
Differential Revision: https://developer.blender.org/D13323
We already supported previews for lights, just didn't actually use them
when making a light object an asset. They were only used when making the
light data itself an asset.
Mistake in e7bea3fb6e.
We should only skip preview generation for objects that don't support
preview rendering, not completely forbid accessing preview data of such
IDs.
BVH2 triangle intersection was broken on the GPU since packed floats can't
be loaded directly into SSE. The better long term solution for performance
would be to build a BVH2 for GPU and Embree for CPU, similar to what we do
for OptiX.
