"Own" (the adjective) cannot be used on its own. It should be combined
with something like "its own", "our own", "her own", or "the object's own".
It also isn't used separately to mean something like "separate".
Also, "its own" is correct instead of "it's own" which is a misues of the verb.
The depsgraph CoW mechanism is a bit of a misnomer. It creates an
evaluated copy for data-blocks regardless of whether the copy will
actually be written to. The point is to have physical separation between
original and evaluated data. This is in contrast to the commonly used
performance improvement of keeping a user count and copying data
implicitly when it needs to be changed. In Blender code we call this
"implicit sharing" instead. Importantly, the dependency graph has no
idea about the _actual_ CoW behavior in Blender.
Renaming this functionality in the despgraph removes some of the
confusion that comes up when talking about this, and will hopefully
make the depsgraph less confusing to understand initially too. Wording
like "the evaluated copy" (as opposed to the original data-block) has
also become common anyway.
Pull Request: https://projects.blender.org/blender/blender/pulls/118338
The `object_to_world` and `world_to_object` matrices are set during
depsgraph evaluation, calculated from the object's animated location,
rotation, scale, parenting, and constraints. It's confusing and
unnecessary to store them with the original data in DNA.
This commit moves them to `ObjectRuntime` and moves the matrices to
use the C++ `float4x4` type, giving the potential for simplified code
using the C++ abstractions. The matrices are accessible with functions
on `Object` directly since they are used so commonly. Though for write
access, directly using the runtime struct is necessary.
The inverse `world_to_object` matrix is often calculated before it's
used, even though it's calculated as part of depsgraph evaluation.
Long term we might not want to store this in `ObjectRuntime` at all,
and just calculate it on demand. Or at least we should remove the
redundant calculations. That should be done separately though.
Pull Request: https://projects.blender.org/blender/blender/pulls/118210
This adds a new `ModifierData.persistent_uid` integer property with the following properties:
* It's unique within the object.
* Match between the original and evaluated object.
* Stable across Blender sessions.
* Stable across renames and reorderings of modifiers.
Potential use-cases:
* Everywhere where we currently use the name as identifier. For example,
`ModifierComputeContext` and `ModifierViewerPathElem`.
* Can be used as part of a key in `IDCacheKey` to support caches that stay
in-tact across undo steps.
* Can be stored in the `SpaceNode` to identify the modifier whose geometry node
tree is currently pinned (this could use the name currently, but that hasn't been
implemented yet).
This new identifier has some overlap with `ModifierData.session_uid`, but there
are some differences:
* `session_uid` is unique within the entire Blender session (except for duplicates
between the original and evaluated data blocks).
* `session_uid` is not stable across Blender sessions.
Especially due to the first difference, it's not immediately obvious that the new
`persistent_uid` can fulfill all use-cases of the existing `session_uid`. Nevertheless,
this seems likely and will be cleaned up separately.
Unfortunately, there is not a single place where modifiers are added to objects currently.
Therefore, there are quite a few places that need to ensure valid identifiers. I tried to catch
all the places, but it's hard to be sure. Therefore, I added an assert in `object_copy_data`
that checks if all identifiers are valid. This way, we should be notified relatively quickly if
issues are caused by invalid identifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/117347
The term `PIL` stands for "platform independent library." It exists since the `Initial Revision`
commit from 2002. Nowadays, we generally just use the `BLI` (blenlib) prefix for such code
and the `PIL` prefix feels more confusing then useful. Therefore, this patch renames the
`PIL` to `BLI`.
Pull Request: https://projects.blender.org/blender/blender/pulls/117325
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Some common headers were including this. Separating the includes
will ideally lead to better conceptual separation between CustomData
and the attribute API too. Mostly the change is adding the file to
places where it was included indirectly before. But some code is
shuffled around to hopefully better places as well.
Remove most includes of this header inside other headers, to remove unnecessary
indirect includes which can have a impact on compile times. In the future we may
want more dedicated "_fwd.hh" headers, but until then, this sticks with the
solution in existing code.
Unfortunately it isn't yet possible to remove the include from `BKE_geometry_set.hh`.
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
Make the naming consistent with the recent change from "loop" to
"corner". Avoid the need for a special type for these triangles by
conveying the semantics in the naming instead.
- `looptris` -> `corner_tris`
- `lt` -> `tri` (or `corner_tri` when there is less context)
- `looptri_index` -> `tri_index` (or `corner_tri_index`)
- `lt->tri[0]` -> `tri[0]`
- `Span<MLoopTri>` -> `Span<int3>`
- `looptri_faces` -> `tri_faces` (or `corner_tri_faces`)
If we followed the naming pattern of "corner_verts" and "edge_verts"
exactly, we'd probably use "tri_corners" instead. But that sounds much
worse and less intuitive to me.
I've found that by using standard vector types for this sort of data,
the commonalities with other areas become much clearer, and code ends
up being naturally more data oriented. Besides that, the consistency
is nice, and we get to mostly remove use of `DNA_meshdata_types.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/116238
The term `looptri` was used ambiguously for both single & arrays.
The term `tri` was also used, causing `tri->tri`.
Use terms:
- `looptris` for an array or when dealing with multiple items.
- `looptri` is used when dealing with a single item.
- `lt` for a single MLoopTri variables & arguments.
This was already a convention but not followed closely.
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Implement the next phases of bounds improvement design #96968.
Mainly the following changes:
Don't use `Object.runtime.bb` for performance caching volume bounds.
This is redundant with the cache in most geometry data-block types.
Instead, this becomes `Object.runtime.bounds_eval`, and is only used
where it's actually needed: syncing the bounds from the evaluated
geometry in the active depsgraph to the original object.
Remove all redundant functions to access geometry bounds with an
Object argument. These make the whole design confusing, since they
access geometry bounds at an object level.
Use `std::optional<Bounds<float3>>` to pass and store bounds instead
of an allocated `BoundBox` struct. This uses less space, avoids
small heap allocations, and generally simplifies code, since we
usually only want the min and max anyway.
After this, to avoid performance regressions, we should also cache
bounds in volumes, and maybe the legacy curve and GP data types
(though it might not be worth the effort for those legacy types).
Pull Request: https://projects.blender.org/blender/blender/pulls/114933
With two or more windows, edit-mode undo assumed it was
possible to load the undo state into the current scene.
When multiple windows are used this is not always the case.
Edit-mode undo steps now store the scene used to create them
which is used to read undo data back into this scene
(when it's shown in a window). Otherwise the current context is used.
Move the three current 'status variables' (stop, update and progress)
into a single 'WorkerStatus' struct. This is cleaner and will allow for
future workin this area without having to edit tens of 'startjob'
callbacks signatures all the time.
No functional change expected here.
Note: jobs' specific internal code has been modified as little as
possible, in many cases the job's own data still just store pointers to
these three values. Ideally in the future more refactor will be using a
single pointer to the shared `wmJobWorkerStatus` data instead.
Pull Request: https://projects.blender.org/blender/blender/pulls/113343
There are a couple of functions that create rna pointers. For example
`RNA_main_pointer_create` and `RNA_pointer_create`. Currently, those
take an output parameter `r_ptr` as last argument. This patch changes
it so that the functions actually return a` PointerRNA` instead of using
the output parameters.
This has a few benefits:
* Output parameters should only be used when there is an actual benefit.
Otherwise, one should default to returning the value.
* It's simpler to use the API in the large majority of cases (note that this
patch reduces the number of lines of code).
* It allows the `PointerRNA` to be const on the call-site, if that is desired.
No performance regression has been measured in production files.
If one of these functions happened to be called in a hot loop where
there is a regression, the solution should be to use an inline function
there which allows the compiler to optimize it even better.
Pull Request: https://projects.blender.org/blender/blender/pulls/111976
This was noted in code comments and checked in Python documentation
generation but not at build time.
Since these enums are identifiers that end up included in various places
enforce the `rna_enum_*_items` convention which was noted as
the convention but not followed strictly.
Partially reverts [0], avoids having to deal with multiple prefix types.
[0]: 3ea7117ed1
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
