This is the unification of all overlays into one overlay engine as described in T65347.
I went over all the code making it more future proof with less hacks and removing old / not relevent parts.
Goals / Acheivements:
- Remove internal shader usage (only drw shaders)
- Remove viewportSize and viewportSizeInv and put them in gloabl ubo
- Fixed some drawing issues: Missing probe option and Missing Alt+B clipping of some shader
- Remove old (legacy) shaders dependancy (not using view UBO).
- Less shader variation (less compilation time at first load and less patching needed for vulkan)
- removed some geom shaders when I could
- Remove static e_data (except shaders storage where it is OK)
- Clear the way to fix some anoying limitations (dithered transparency, background image compositing etc...)
- Wireframe drawing now uses the same batching capabilities as workbench & eevee (indirect drawing).
- Reduced complexity, removed ~3000 Lines of code in draw (also removed a lot of unused shader in GPU).
- Post AA to avoid complexity and cost of MSAA.
Remaining issues:
- ~~Armature edits, overlay toggles, (... others?) are not refreshing viewport after AA is complete~~
- FXAA is not the best for wires, maybe investigate SMAA
- Maybe do something more temporally stable for AA.
- ~~Paint overlays are not working with AA.~~
- ~~infront objects are difficult to select.~~
- ~~the infront wires sometimes goes through they solid counterpart (missing clear maybe?) (toggle overlays on-off when using infront+wireframe overlay in solid shading)~~
Note: I made some decision to change slightly the appearance of some objects to simplify their drawing. Namely the empty arrows end (which is now hollow/wire) and distance points of the cameras/spots being done by lines.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6296
Instead of having the option to show marker lines,
make the marker region optional.
- Added a Show Markers entry in the View menu of the animation editors.
- If the markers region is not active then the Marker menu gets hidden.
- Removed marker menu from the driver editor
and don't allow to use marker operators.
This patch will allow the user to select the EEVEE renderpass to be
shown in the viewport by default the combined pass will be shown.
Limitations:
* Viewport rendering stores the result in a `RenderResult`. RenderResult
is not aware of the type of data it holds. In many places where RenderResult
is used it is assumed that it stores a combined pass and the display+view
transform are applied.
I will propose to fix this in a future patch. But that is still being
designed and discussed.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D6319
This adds support to the current sculpt sample detail operator to sample
a voxel size for the voxel remesher when sculpting on regular meshes.
It provides an approximation of a voxel size that is going to preserve
the sampled sculpt details after remeshing. It is not going to be 100%
accurate in all cases as it relies on having consistent edge length in
the whole sculpt, but it saves a lot of time and avoids guessing the
voxel size by trying different values.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6251
The relation between the pressure/size and the pressure/alpha is a
fundamental property that defines the behavior of a brush, so it does
not make sense to have it unified across all brushes. This applies both
for sculpting and painting.
Some of the new 2.82 brushes need pressure/size or pressure/alpha to be
enabled to work propely, while others don't. Users should not be
switching on and off this property manually when changing brushes if they
want to use unified size. This is also causing that some users are using
the brushes with an incorrect configuration.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6291
This adds some basic simulation of internal air pressure inside of
closed cloth mesh objects.
Reviewed By: Jacques Lucke
Differential Revision: http://developer.blender.org/D5473
Improve laggy performance while moving File Browser by not refreshing fsMenu lists in its init.
Differential Revision: https://developer.blender.org/D6112
Reviewed by Bastien Montagne
Unfortunately, it didn't turn out to be as great as I've hoped to it
will.
The issue is: the label eats too much space, making selector buttons
and image name to be barely readable. Initial idea of making the panel
somewhat wider didn't work either: due to the sizing policy of label
it takes a lot of panel width to make image name readable.
Adds a theme setting to specify color of widget text insertion cursor (caret).
Differential Revision: https://developer.blender.org/D6024
Reviewed by Campbell Barton
When introducing "drag-all-selected" support all over Blender, we
figured this wouldn't work well with the Graph Editor
selection/transform behavior.
Hence, William and I worked on the following changes, although we used
this chance to improve the behavior in general too.
For more info see T70634.
* Handles now always move with the key, regardless if they are selected
or not.
* Selecting the key doesn't select the handles anymore, their selection
is separate.
* Multiple keys and handles can now be dragged.
* Dragging a handle moves all selected handles **on the same side**.
* Tweak-dragging any handle can never affect any keyframe location,
only handles.
* G/R/S should behave as before.
* Changing the handle type with a key selected always applies the change
to both handles.
* Box selection with Ctrl+Drag now allows deselecting handles (used to
act on entire triple only).
* Box selection //Include Handles// option now only acts on visible
handles, wasn't the case with Only Selected Keyframes Handles enabled.
* Box selection //Include Handles// is now enabled by default in all
bundled keymaps.
The changes have been tested for some days by the animators here in the
Blender Animation Studio. Some changes are based on their feedback.
Also, this improves/adds comments for related code.
Differential Revision: https://developer.blender.org/D6235
Reviewed by: Sybren Stüvel, William Reynish
Only indent when there aren't characters before the cursor.
This resolves the conflict with Ctrl-Space for view maximize.
D6239 by @wbrbr for text editor, based console support on this.
After adding normal radius, the main use of the Scrape brush is to create flat surfaces with sharp edges. In that case, it does not make sense to have our current "Peaks" version of the brush as its inverted version.
The correct inverted version of Scrape for this use case is the Fill brush. This way you can use this tool to crease both concave and convex sharp edges and to fix the artifacts one version produces with its inverted version.
I think we should merge these two tools into one, but for now, this solution keeps compatibility with the old behavior.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6022
The smooth iterations of the pose factor were hardcoded to 4. This works fine in most situations when you are posing a low poly mesh, which is the main use case of this tool. I added the smooth iterations as a brush property in case you need to pose a high poly mesh directly without producing artifacts.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6157
This operator is similar to Mask Extract, but it deletes the masked points on the original mesh and fills the holes. This can be useful for quickly trimming or splitting an object.
This is not meant to be the main trimming tool of sculpt mode. I plan to have a set of trimming tools based on geometry booleans (trim box, lasso, line, bisect...) but in some cases doing a mask selection is more convenient.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6160
The Multiplane Scrape brush creates sharp edges with a given fixed angle by trimming the mesh with two planes in local space at the same time. When working with stylized or hard surface models, this brush produces way better results and is more predictable than any other crease/flatten brush based on curves and alphas.
It is also the first brush we have than can produce hard surface concave creases.
The Multiplane Scrape Brush also has a dynamic mode where it samples the surface to fit the angle and scrape planes during a stroke. With this mode enabled you can sculpt multiple times over the same edge without creating artifacts.
It can also create creases that change between concave and convex during the same stroke.
The behavior of this brush will improve after merging patches like D5993 and its behavior in concave creases can still be improved, so I will keep tweaking its parameters and default values once we have all brush properties available.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6174
Dash Ratio and Dash Samples are brush properties to modify the strength of the brush during a stroke. This is useful to create dashed lines in texture paint or stitches in sculpt mode.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D5949
Previously these used a gizmo to redo the operator however this
complicated having on-screen gizmos to access tools (see T66304).
Replace this with a generic way to make an operator that only has an
execute function into a modal operator.
This is used for smooth and randomize tools.
Unlike operator gestures, this handles storing and resetting the data.
Currently this only handles edit-mode data, however it's can be
extended to other kinds of data.
Removed the weight limit and made the setting more clear in what it actually does.
IE, it controlls the weight of the vertices of the cloth mesh
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5450
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support.
Differential Revision: https://developer.blender.org/D6268
Reviewed by Campbell Barton
Rename and separate Layers and Materials Specials menu from other buttons for better consistency
Reviewed By: antoniov
Differential Revision: https://developer.blender.org/D6271
This patch includes a modifiers that developed for NPR rendering.
- MultiStroke modifier that generates multiple strokes around the original ones.
Differential Revision: https://developer.blender.org/D5795
This caused T71483.
Having timeline and dopesheet merged in 2.8 makes using S/E keys in timeline not work well.
2.7x keymap needs to fit with 2.8x internals, so probably 2.7x keymap will have to live with Ctrl+Home / Ctrl+End here.
This reverts commit 4fbcbbfb96.
Experimental tab in User Preferences for experimental features.
The tab option is only visible when "Developer Extras" is on.
Included here is a (commented out) example panel to be used as a
template for the new experimental panels. Since these panels will come
and go it is nice to have a reference in the code.
Differential Revision: https://developer.blender.org/D6203
Most of the time Stretch To is used in actual rigs, like BlenRig
or Rigify, in combination with Damped Track to handle rotation
before the stretch, because it produces rotations more appropriate
for organic deformation, and doesn't flip because of internal
gimbal lock.
The prevalence of this pattern suggests that Stretch To should
support that kind of rotation directly as an option.
Differential Revision: https://developer.blender.org/D6134
