is present
Caused by rB4212b6528afb.
'updateGLSLCurveMapping()' compares cacheIDs and in certain scenarios,
these are the same when they should not.
- whenever we had multiple viewports that are colormanaged with
curvemappings this worked right (cacheIDs were different)
- for example, this also worked right when the ImageEditor displays a
Render Result or a Compositor Viewer
- but it worked wrong when the Image Editor displays any other Image (or
no Image at all)
- it also worked right if there were multiple Image Editors [and one of
them displays a Render Result e.g]
Now why is this so?
For comparison, the curve mapping's pointer/address is used.
- update_glsl_display_processor frees the curve_mapping, see
BKE_curvemapping_free(global_glsl_state.curve_mapping)
- similar, update_glsl_display_processor creates a new curvemapping, see
BKE_curvemapping_copy(view_settings->curve_mapping)
- now for the situation that a viewport with curvemapping and a viewport
without curvemapping is present and you make changes to the curvemapping
the following happens:
-- curve_mapping_settings->cache_id is set once [to the memory address
of curvemapping before change]
-- change happens
-- viewport 1 frees curvemapping
-- viewport 2 duplicates using BKE_curvemapping_copy, but this one gets
the same address like before the change
-- this means we have different data on the same address with the same
cacheID...
Solution: to really make the cache ID unique we can combine the pointer
with its 'changed_timestamp' [which increases on every change].
Reviewers: jbakker
Maniphest Tasks: T82460
Differential Revision: https://developer.blender.org/D9559
The issues was that Blender was trying to refresh the
splash screen region. However, opening the file browser
closed the splash screen and freed the region.
The fix is to simply not refresh the region.
Has been approved in T81817.
Two problems were fixed. One, the code for dissolving vertices
left a face around if dissolving a vertex would leave less than
three vertices. Instead, the face should be deleted.
Two, with transformations like "rotate 180 degrees", this should
be no problem with exact, but the current transformation matrix
has very small non-zero entries where it shouldn't. Cleaning the
transformation matrix makes it more likely that user expectations
about coplanar faces will be fulfilled.
It should not be possible to set the scene collection's color tag
through rna. Also adds a missing notifier for setting the collection
color tag from python.
After rB452a1c7b3838 there were still a few cases where the old
collection icon was used in the interface. Replace these with the new
filled collection icon.
Only a single DEG operation node `POSE_SPLINE_IK_SOLVER` should
be added in this case [ see `build_splineik_pose`, same is already done
for overlapping IK in `build_ik_pose`]
ref T82347.
Reviewers: sybren
Maniphest Tasks: T82347
Differential Revision: https://developer.blender.org/D9471
Add a new property `co_ui` to Keyframes, the modification of which will
apply to the keyframe itself as well as its Bézier handles.
Dragging the "Keyframe" slider in the properties panel now maintains the
deltas between the keyframe and its handles, just like moving the key in
the graph editor would.
Reviewed by @sybren in T81813.
This is more in line to other eyedropper usages throughout blender.
Affected operators:
- Sample Dyntopo detail
- Extract Face Set (as reported in T82615)
ref T82615
Maniphest Tasks: T82615
Differential Revision: https://developer.blender.org/D9531
When creating an armature from the skin modifier, resulting bones would
always be flagged BONE_CONNECTED.
Those bones cannot be transformed (just rotated).
Now only flag bones that really have a parent BONE_CONNECTED.
Maniphest Tasks: T82624
Differential Revision: https://developer.blender.org/D9534
When painting in the image editor on data images (Non-color, Raw) the
color mismatched between the sampled color and the actual effect that
the painting has on the image. The root cause is that the sampling is
color managed, but the painting still uses a fixed color management
pipeline with a lot of assumptions. Due to recent changes the drawing
of the image editor is color managed, but the painting isn't what made
these changes show up.
This patch is a work-a-round so that the sampled colors and the effect
the paint has on the texture matches. This isn't the correct solution
as that would be to migrate all the painting tools to use proper color
management.
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9411
There are two implementations of the Sample Color operation. One is used
by the paint texture and one by the image editor. The image editor
variant sampled from the ibuf directly, but the paint texture variant
was sampling from the screen front buffer. This can lead into incorrect
samples due to color pipeline.
This patch will use the image editor variant when sampling a color for
2d texture painting
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9408
Needed a better normal to for plane to offset into when there are
non in-plane edges between two beveled edges. It was using the vertex
normal, which is just wrong.
Differential Revision: https://developer.blender.org/D9508
- scrolling would be restricted (usually, if the object to be renamed is
in view, this prevents scrolling away without finishing the rename
operation)
- renaming by typing and confirming with Enter was not possible (you
would have to escape, scroll to the object and use F2 again)
- other shortcuts like A and H are still active instead of being handled
as text input
Avoid all these issue by forcing the item into view using
outliner_show_active / outliner_scroll_view.
Maniphest Tasks: T82553
Differential Revision: https://developer.blender.org/D9521
Scrolling to an item after opening relevant parents can go wrong if said
parent e.g. the last in the list [as in: then the Outliner does not
scroll down all the way]
It stems from the fact that 'region->v2d.tot.ymin' is not up-to-date in
outliner_scroll_view after outliner_show_active opens up parents, 'tot'
will only update on a redraw.
Now calculate the trees height on the fly using
'outliner_tree_dimensions()'.
ref D9521
ref T82553
Maniphest Tasks: T82553
Differential Revision: https://developer.blender.org/D9523
Selection should be possible from the left gutter in object mode. When
in other modes the mode column displays icon buttons which should be
prioritized for selection only in those modes.
Introduced in rB2110af20f5e6.
Perform grease pencil rendering delayed in this case, as there are no render
buffers available for compositing. This keeps memory usage lower, but does
involve multiple depsgraph evaluation. This seems in line with the intent of
the save buffers feature, to use minimal memory.
The skin modifier did not output consistent results, causing failure to find
corresponding vertices across frames.
Remove unnecessary use of GSet, all we need is an array.
This reverts commit 4987b7d347.
This introduced a slight change in curve direction at end-points
(while correct), it caused tests to fail.
Keep this change for 2.92, revert for 2.91.
The code was trying to ignore hidden geometry when doing boolean,
which is correct when used as a tool, but not when a modifier.
Added a "keep_hidden" argument to bmesh_boolean to distinguish the
two cases.
Also fixed a bug when the tool is used with hidden geometry that
is attached to unhidden geometry that is deleted by the operation.
The code for determining coplanar clusters had a bug where it would
miss some triangles. The fix for now is to just put triangles in
the cluster if their bounding boxes overlap. This works but maybe
makes clusters bigger then they have to be. I'll follow this commit
with work on making the CDT routine faster when using exact arithmetic.
Also removed a lot of unused code, and added some new intersect
performance tests.
When using a trackpad Zoom to Mouse Position would always zoom to center of canvas.
Differential Revision: https://developer.blender.org/D8683
Reviewed by Brecht Van Lommel
Ensure that Zoom does not crash on Mac Trackpad by checking for existence of Continuous Zoom timer.
Differential Revision: https://developer.blender.org/D8682
Reviewed by Julian Eisel
When using Optimal Display, some edges are not flagged `ME_EDGEDRAW` |
`ME_EDGERENDER`.
When the modifier is applied through the UI in the modifier stack this is
not an issue because the `modifyMesh` callback is run with
`MOD_APPLY_TO_BASE_MESH` (this will effectively turn of Optimal
Display).
When converting to mesh though, this will just get an evaluated mesh
(where the edge flags are still the same as with the subdivision
modifier).
Now ensure every edge is flagged to draw after conversion.
Maniphest Tasks: T81997
Differential Revision: https://developer.blender.org/D9331
Caused by rBb077de086e14.
Not entirely sure why this was rebuilding the tree prior to above
commit, but sending an ND_OB_SHADING notifier is appropriate (and also
what the Outliners listener listens to).
Maniphest Tasks: T82251
Differential Revision: https://developer.blender.org/D9396
This is caused by the TAA being reset after the init phase, leading to
1 sample being kept as valid when it is clearly not.
To fix this, we run the lookdev validation before TAA init.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9452
So a keyframed e.g. location slider would stay yellow/green even if its
corresponding channel was removed.
Needs a appropriate notifier so the listeners (e.g.
buttons_area_listener, view3d_buttons_region_listener) would cause a
redraw.
Maniphest Tasks: T82364
Differential Revision: https://developer.blender.org/D9438
accelerations
Caused by rB45dbc38a8b15.
Above commit would place parentheses surrounding a block until the next
operator was found.
For velocities and accelerations though, the '/' in 'm/s' or 'ft/s'
should not be considered an operator.
Maniphest Tasks: T82407
Differential Revision: https://developer.blender.org/D9467
When editbones were selected from the Outliner (and they were connected
to a parent) with the 'Sync Selection' option turned ON, they could not
get duplicated.
For duplication to work, the (connected) parent bone's tip also has to
be selected [which was not the case when selection is done from the
Outliner under above circumstances]. The reason being that
armature_duplicate_selected_exec ->
ED_armature_edit_sync_selection clears the BONE_ROOTSEL flag if the
parent bone's BONE_TIPSEL is not set.
Caused by rB71eb65328078 btw.
The correct "parent-tip-selection" would actually happen in activation
- `tree_element_active_ebone`
-- `tree_element_active_ebone__sel`
but for 'Sync Selection' this happens [also] in
- `outliner_sync_selection_from_outliner`
-- `outliner_select_sync_to_edit_bone`
which did not do the "flushing" to the parent bone's tip
Now use existing dedicated function for this.
ref. T82347
Reviewers: Zachman
Differential Revision: https://developer.blender.org/D9470
The draw face sets brush uses the poly center when used in meshes to increase
its precision when working in low poly geometry. For this to work with deformed
meshes, the deformed coordinates from the PBVH should be used instead.
Reviewed By: sergey
Maniphest Tasks: T81915
Differential Revision: https://developer.blender.org/D9424
BKE_mesh_free() seems to not free the meshes correctly, so using BKE_id_free() instead.
The looptri array was also not freed.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9426
The two entries `TFM_MODAL_AUTOCONSTRAINT` and
`TFM_MODAL_AUTOCONSTRAINTPLANE` had the same name
displayed in the UI. The latter is now includes
"plane" in it's name.
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D9474
