This implements the memorization of the previous state of a space's
subtype for those that have multiple modes. Introduces an optional
space_subtype_prev_get callback, implemented for SPACE_ACTION,
SPACE_FILE, SPACE_GRAPH, SPACE_IMAGE and SPACE_NODE. This means we
can always return to the previous mode.
Pull Request: https://projects.blender.org/blender/blender/pulls/133846
The compositor crashes when the active viewer layers is deleted and
replaced by a new layer. That's because the depsgraph of the compositor
still references the old view layer. To fix this, we need to update the
view layer of the compositor if it changed since it was last created.
Pull Request: https://projects.blender.org/blender/blender/pulls/134326
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
Currently UI code always has to use char pointers when interacting with
the translation system. This makes benefiting from the use C++ strings
and StringRef more difficult. That means we're leaving some type safety
and performance on the table. This PR adds StringRef overloads to the
translation API functions and removes the few calls to `.c_str()` that
are now unnecessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/133887
Also use Vector to store menu search items instead of a linked
list. And extend the change into the autocomplete API slightly.
The main benefit is to avoid measuring the length of strings over
and over, but the code also gets simpler.
When active node is clicked again, the image editor does not update and
keeps showing the old image. Always run `ED_space_image_sync`, when
clicked node is image texture node to resolve this issue.
Pull Request: https://projects.blender.org/blender/blender/pulls/133956
`compositor_is_in_use` sets `used_by_compositor` true when GPU device is
selected. This draws render pass warning even when viewport
compositor is disabled. Remove the condition to fix the unintentional
warning. Following function is just used in node drawing, seems safe to
remove then.
Pull Request: https://projects.blender.org/blender/blender/pulls/133753
This patch allows the compositor context to specify exactly which
outputs it needs, selecting from: Composite, Viewer, File Output, and
Previews. Previously, the compositor fully executed if any of those were
needed, without granular control on which outputs are needed exactly.
For the viewport compositor engine, it requests Composite and Viewer,
with no Previews or File Outputs.
For the render pipeline, it requests Composite and File Output, with
node Viewer or Previews.
For the interactive compositor, it requests Viewer if the backdrop is
visible or an image editor with the viewer image is visible, it requests
Compositor if an image editor with the render result is visible, it
requests Previews if a node editor has previews overlay enabled. File
outputs are never requested.
Pull Request: https://projects.blender.org/blender/blender/pulls/133960
This patch adds support for drag and dropping colors (from color buttons) into
the Compositing, Shading and Geometry node trees.
Additional support was added for dragging and dropping colors with an Alpha
component (which was previously ignored), both in the context of the Node Editor
and for Color Buttons in general. This handles cases like drag and dropping a
color from an RGB to an RGBA button, which recreates the color with a default
Alpha value of 1.0.
Pull Request: https://projects.blender.org/blender/blender/pulls/129026
Artists often want to quickly switch back and forth between two or more nodes while compositing.
This patch implements two operators `NODE_OT_viewer_shortcut_set` and `NODE_OT_viewer_shortcut_get` that allow users to map a viewer node to a shortcut. For example, pressing `cltr+1` while a node is selected, assigns that node to the shortcut `1`, creates a viewer node if it has none attached and sets that viewer node to active. Pressing `1` will set the active node with shortcut `1` to active.
Shortcuts are saved in DNA to preserve them after saving/loading blend files.
Limitations:
- Only compositor node tree is supported, because shading editor has no viewer node and geometry nodes viewer works differently.
Pull Request: https://projects.blender.org/blender/blender/pulls/123641
This patch automatically grays out input values which can't affect the output
currently. It works with inputs of group nodes, geometry nodes modifiers and
node tools.
To achieve this, it analyses the node tree and partially evaluates it to figure
out which group inputs are currently not linked to an output or are disabled by e.g.
some switch node.
Original proposal: https://devtalk.blender.org/t/dynamic-socket-visibility/31874
Related info in blog post:
https://code.blender.org/2023/11/geometry-nodes-workshop-november-2023/#dynamic-socket-visibility
Follow up task for designing a UI that allows hiding sockets: #132706
Limitations:
* The inferencing does not update correctly when a socket starts being
animated/driven. I haven't found a good way to invalidate the cache in a good
way reliably yet. It's only a very short term problem though. It fixes itself
after the next modification of the node tree and is only noticeable when
animating some specific sockets such as the switch node condition.
* Whether a socket is grayed out is not exposed in the Python API yet. That will
be done separately.
* Only a partial evaluation is done to determine if an input affects an output.
There should be no cases where a socket is found to be unused when it can actually
affect the output. However, there can be cases where a socket is inferenced to be used
even if it is not due to some complex condition. Depending on the exact circumstances,
this can either be improved or the condition in the node tree should be simplified.
Pull Request: https://projects.blender.org/blender/blender/pulls/132219
Now the output socket checks if the corresponding inline socket that it should
be aligned with is visible.
This is an alternative to #133271 which had the problem that it resulted in
`flat_item::Socket` instances for which the input and output is `nullptr`.
Pull Request: https://projects.blender.org/blender/blender/pulls/133325
This uses the following accessor methods in more places in more places:
`is_group()`, `is_group_input()`, `is_group_output()`, `is_muted()`,
`is_frame()` and `is_reroute()`.
This results in simpler code and reduces the use of `bNode.type_legacy`.
Pull Request: https://projects.blender.org/blender/blender/pulls/132899
`BKE_main_ensure_invariants` was added in 1fae5fd8f6. The older
`ED_node_tree_propagate_change` was already implemented as a thin wrapper around
`BKE_main_ensure_invariants`. This patch removes the wrapper and calls the more
general function directly.
A new overload of `BKE_main_ensure_invariants` is added for the common case when
only a single data-block has been modified.
Pull Request: https://projects.blender.org/blender/blender/pulls/133048
This patch adds a new `BKE_main_ensure_invariants` function. For now it only
ensures node-tree related invariants, but more may be added over time.
The already existing `ED_node_tree_propagate_change` now internally calls
`BKE_main_ensure_invariants`. We can probably remove this indirection at some
point and call the new function directly, but for now it is kept to keep this
patch small.
This is based on a recent discussion in the Core module meeting:
https://devtalk.blender.org/t/2024-12-12-core-meeting/38074
```cpp
/**
* Makes sure that invariants in original DNA data are maintained after changes.
*
* This function has to be idempotent, i.e. after calling it once, additional calls should not
* modify DNA data further. If it would, it would imply that this function does more than
* maintaining invariants.
*
* This has to be called after any kind of change to original DNA data that may be involved in some
* of the maintained invariants. It's possible to do multiple changes in a row and then fixing all
* invariants with a single call in the end. Obviously, the invariants are not maintained in the
* meantime then and functions relying on them might not work.
*
* If nothing is changed, this function does nothing and it should not be slower than checking a
* flag on every data-block in the given bmain.
*
* Sometimes, it is known that only a single or very few data-blocks have been changed (e.g. when a
* node has been inserted in a node tree). Passing in #modified_ids can speed up the function
* because it may avoid the need to iterate over all data-blocks to find modified data-blocks.
*
* Examples of maintained invariants:
* - Group nodes need to have the correct sockets based on the referenced node group.
* - The geometry nodes modifier needs to have the correct inputs based on the referenced group.
*/
void BKE_main_ensure_invariants(Main &bmain,
std::optional<blender::Span<ID *>> modified_ids = std::nullopt);
```
This also adds `windowmanager` as a dependency of `blenkernel` to be able to
send notifiers.
Pull Request: https://projects.blender.org/blender/blender/pulls/132023
Main goals of this refactor:
* Make it more obvious which update function should be used.
* Make it more obvious which parameters are required by using references instead
of pointers.
* Support passing in multiple modified trees instead of just a single one.
No functional changes are expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/132862
The new description for `bNode.type_legacy`:
```
/**
* Legacy integer type for nodes. It does not uniquely identify a node type, only the `idname`
* does that. For example, all custom nodes use #NODE_CUSTOM but do have different idnames.
* This is mainly kept for compatibility reasons.
*
* Currently, this type is also used in many parts of Blender, but that should slowly be phased
* out by either relying on idnames, accessor methods like `node.is_reroute()`.
*
* A main benefit of this integer type over using idnames currently is that integer comparison is
* much cheaper than string comparison, especially if many idnames have the same prefix (e.g.
* "GeometryNode"). Eventually, we could introduce cheap-to-compare runtime identifier for node
* types. That could mean e.g. using `ustring` for idnames (where string comparison is just
* pointer comparison), or using a run-time generated integer that is automatically assigned when
* node types are registered.
*/
```
Pull Request: https://projects.blender.org/blender/blender/pulls/132858
The part that used the context does not seem to be necessary anymore. If the
given tree has any update tag set, the same notifiers will be sent anyway by the
`tree_changed_fn` callback.
If it turns out that we are now missing some notifier, then we have to change
the caller. It either has to call the proper `BKE_ntree_update_tag_*` function,
or create the notifier directly.
This change helps to generalize the concept of propagating changes in original
data, because the context is rarely available.
Pull Request: https://projects.blender.org/blender/blender/pulls/132810
Make the type structs non-trivial, use new and delete for allocation and
freeing, and use std::string for most strings they contain. Also use
StringRef instead of char pointers in a few places. Mainly this improves
ergonomics when working with the strings.
Pull Request: https://projects.blender.org/blender/blender/pulls/132750
This caused build errors on the docs builder, I can't seem to reproduce
locally, so revert for now and have another look at some point in the
future.
Sadly as these changes usually go, this took 5c515e26bb and
2f0fc7fc9f with it as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/132559
