The general idea is to order all menus as:
```
Common categories
(e.g. Input/output)
---
Specific categories
---
Assets
--
Common categories
(e.g. Group/Layout)
```
## Changes:
### Compositor
- Removed Color/Mix submenu
- Moved Vector to Utilities
- New Category: "Creative". This is where most new assets will fit in.
- Moved to Creative:
- Kuwahara
- Pixelate
- Posterize
### Geo Nodes
- Moved 'Vector' to 'Utilities'
- Moved 'Attribute' before 'Geometry'
- Moved 'Material' to 'Geometry'
- Moved 'Color' to top level, grouped with Utilities
### Shader
- Moved 'Vector' to 'Utilities'
- Deleted 'Converter'
- New 'Displacement' menu
- Grouped 'Color' with Utilities (remains top level)
Ref: https://devtalk.blender.org/t/2025-09-05-design-session-node-groups-different-editors/42244
Pull Request: https://projects.blender.org/blender/blender/pulls/146806
This adds versioning code that replaces any timeline with a
dopesheet where the footer is shown, AND it removes the
timeline from the menu options.
If the area is too small to show both, the footer and the
header then only the footer is shown.
This assumes that users created the small timeline
just for the playback controls
Any uses of `SACTCONT_TIMELINE` (except for versioning) have been removed.
part of #145577
Pull Request: https://projects.blender.org/blender/blender/pulls/147058
The purpose of this node is to create a grid with new voxel values on
the same grid topology as an existing grid. The new values are the
result of field evaluation. Multiple grids can be created at the same
time, so that intermediate results used for multiple grids can be
efficiently reused during evaluation. This is more efficient than the
"Volume Cube" node, for instance, because the output grid shares the
sparseness of the input topology grid.
Pull Request: https://projects.blender.org/blender/blender/pulls/147074
This adds new icons for the remaining two modifier Essentials assets
bundled with Blender in the `Generate` category.
(`Curve to Tube` and `Scatter on Surface`)
Pull Request: https://projects.blender.org/blender/blender/pulls/147115
The motivation is to keep backward compatibility after deprecating
`material.use_nodes()` and `world.use_nodes`. For example the
following script would behave the same way in 4.5 and 5.0:
```python
mat = bpy.data.materials.new("My new mat")
mat.use_nodes = True
```
Pull Request: https://projects.blender.org/blender/blender/pulls/147052
Functionality has been replaced by strip transform properties. Transform
strips in existing files will be replaced with gaussian blur with radius
of 0 to preserve modifiers and overall strip stack.
Pull Request: https://projects.blender.org/blender/blender/pulls/147003
Adds a Join Bundle node with a multi-input Bundle socket. Bundles are
iterated on the top level of each input bundle and items added to the resulting
single bundle. While creating the final bundle existing items have priority and
new items with an already existing name are discarded.
There is an info message when there are duplicate keys in the input bundles.
Co-authored-by: Brady Johnston
Co-authored-by: Jacques Lucke
Pull Request: https://projects.blender.org/blender/blender/pulls/146750
Since adding this TODO, the panels can be shown from the tool-header,
properties editor & active tools tab, so there isn't a good reason to
move them to space_view3d.py. Remove the TODO comments instead.
Similar to 327a1925cf
* Renames `strength_curve` to `curve_distance_falloff`
* Renames `curve_preset` to `curve_distance_falloff_preset`
These changes are done for consistency with the other concepts in the
other paint modes.
Pull Request: https://projects.blender.org/blender/blender/pulls/147071
Currently, the compositor template ID creates a new node tree. This is
inconsistent with other node editors where the button copies the node
tree.
Also use "New" in geometry nodes operator description instead of "Copy"
Pull Request: https://projects.blender.org/blender/blender/pulls/146222
Fix: correctly update Actions when renaming/re-typing a custom property
When renaming a custom property on a data-block, only update the
animation in a slot for that data-block. Previously all F-Curves were
updated, even when they were meant for other data-blocks.
This also handles the cases where the type of a custom property is
changed, and not just its name.
This is part of #146586
Pull Request: https://projects.blender.org/blender/blender/pulls/146979
Toggles the new `show_presets` option on for the recently added brush
size, strength, and jitter curves across paint modes to allow users
to set these custom curves to any of the defined internal presets.
Pull Request: https://projects.blender.org/blender/blender/pulls/147000
To support setting the custom `CurveMapping` to a well defined preset,
there exist a number of operators that are hardcoded to apply a
particular preset to a particular curve.
This commit begins to replace this functionality and make it part of the
template itself, allowing the preset to be applied to any curve. For
now, it only supports either positive or negative slopes, primarily for
the brush usecases.
The `brush.curve_preset` and `brush.sculpt_curves_falloff_preset`
operators are unneeded after this change and have been removed.
Notably, these preset controls have not been added elsewhere, they can
be added on a case by case basis in future commits by interested
modules.
Pull Request: https://projects.blender.org/blender/blender/pulls/146847
This adds three corner types: `Round` `Sharp` and `Flat`.
These control how the corner of `Grease Pencil` line strokes are rendered.
- The `Round` type draws circular arcs, and is what `Grease Pencil`
currently supports and is default.
- The `Flat` type cuts off the tip of the corner.
- The `Sharp` type allows for sharp corners to be created.
If the angle is sharper than `Miter Limit` then the tip will be cut like `Flat`
These three types match the main types of `line joins` present in `SVG`
files.
This data is stored in one `Point` attribute called `miter_angle`.
This stores both the `Corner Type`, the `Miter Limit` and defaults to
the `Round` type.
This PR adds:
- Rendering of the corner types.
- An operator for setting the `Corner Type` and `Miter Angle` attribute.
- Corner types to the `Outline` operator and modifier.
Part of #145380.
Pull Request: https://projects.blender.org/blender/blender/pulls/143688
This implements the Menu Switch node in shader nodes. It's the same node that is
used in Geometry Nodes and the Compositor.
The Menu Switch node is purely handled during preprocessing and thus builds on
top of #141936. Hence, it's input has to be a single value, just like the
iteration count for repeat zones. This limitation can be lifted in the future,
but currently there is no way to produce a non-single menu value in shader
nodes. This will become possible if other Switch nodes are added though.
Pull Request: https://projects.blender.org/blender/blender/pulls/146896
Since 1122a05cb6 tool settings could return None, but we do not check this
consistently in scripts. Now always return some tool settings, since it's difficult
to verify and easy to forget proper null checks in e.g. operator poll functions.
The sequencer UI code was updated to continue showing tool settings only when
there is a sequencer scene.
Co-authored-by: Sergey Sharybin <sergey@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/146166
Hardocde the position of the essentials assets in the menu,
for consistent alphabetical order and a clearer indication of
the different between the nodes and builtin "Array" modifiers
(the old one is now called "Array (Legacy)").
Pull Request: https://projects.blender.org/blender/blender/pulls/146887
This adds a new operator which can join multiple nodes together. Currently, it
only supports joining Group Input nodes. However, in the future it could be
extended to join e.g. Bake and Capture Attribute nodes.
This uses the recently freed up ctrl+J shortcut for this functionality, which
feels natural to me.
The implementation is fairly straight forward. The main tricky aspect is
sometimes the nodes can't be joined when that would result in two sockets being
linked to each other twice. In this case, the a separate Group Input node is
kept.
The selected nodes are merged into the active node (in case the active node is
part of the selection, otherwise there is a fallback).
Pull Request: https://projects.blender.org/blender/blender/pulls/146894
This new translation context is for some special cases when
translation cannot be avoided, for example in an interface where some
props are built-in (translatable) and others are
user-defined (non-translatable), but we don't know which ones in
advance.
It allows specifying explicitly that translation should not occur
for user data when building the UI.
It is a followup to !145963, in which the context was introduced as a
string literal instead of a defined context.
Implements #146360
Update VFX template with minimum changes:
- Replace Timeline with DopeSheet footer.
- Save (with compression). 525kb → 92kb
All changes were done on a release build at 1920x1080, without a
preferences folder.
See PR for details and screenshtos.
Pull Request: https://projects.blender.org/blender/blender/pulls/146851
When trying to find and open an older file, it is annoying when it is not in the
recent files list anymore. This patch increases the length of the recent files
list, without making the menu huge by making better use of menu-search.
Specifically the following is changed: * Number of remembered recent files is
increased from 20 to 200 by default. * The recent files menu is limited to 20
entries. * When activating menu search (by pressing space when in the menu), all
available recent files can be searched. * There is a new "More..." menu entry at
the bottom, which also activates the menu search.
Pull Request: https://projects.blender.org/blender/blender/pulls/146884
Calling the swap operators can result in Blender crashing. From my
testing, the behavior is inconsistent, as sometimes a crash is triggered
and other times it isn't. Though notably, they seem involve nodes
already linked to other nodes, or zones.
The crashing stems from the operators trying to access deleted data.
There were two places where this happens that were identified, one
involving removed links and the other involving removed nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/146909
The Mix node has multiple subtypes for handling different data types. (Float, Color, Vector, etc.)
Since these are commonly used operations, the different subtypes are made easily accessible
under the names "Mix Color" & "Mix Vector". These are mostly present in the various node
editors. (Shader, Geometry, & Compositing)
Notably, for Shader Nodes, however, only the "Mix Color" entry is present in the Add Menu.
This patch adds the missing "Mix Vector" entry under the "Vector" category of the
Shader Editor Add Menu.
Pull Request: https://projects.blender.org/blender/blender/pulls/142886
This patch exposes the "Rotation" subtype of the Mix node in the Geometry Node Add Menu.
This is in a similar vein to "Mix Color" & "Mix Vector", as it makes this subtype more easily
accessible and searchable in the menu.
Pull Request: https://projects.blender.org/blender/blender/pulls/142887
This node outputs tangent values for face corners. There are two methods:
- **Exact** is the same MikkTSpace calculation used elsewhere in Blender.
- **Fast** (from #131308) is over 4x faster, and useful in many of
the same situations, though not necessarily tangential to the surface.
The reason to include both methods is that there are use cases where the
quality of the tangents don't matter (though the results are actually very
similar visually), we just need some continuous values across faces.
Pull Request: https://projects.blender.org/blender/blender/pulls/145813
Currently cameras composition guide colors are defined in theme, and not even by an individual
property. They follow 3D Viewport -> View Overlay color, which also defines many other things,
such as world origin cursor. By default it's black and it's difficult to change, because then other
things stand out. But using default black for composition guides is impossible.
This PR, instead, adds new Composition Guide Color property on camera, and uses it in camera view.
This not only fixes the issue mentioned above, but also allows different cameras in one scene to
have different overlay colors. This is very handy when you have, for example, two cameras, one of
which looks at the black corner, and another at the lit-up white one. Using a single black or white color
in this case makes the other one more difficult to see. Now, each camera can have its own color.
This PR only changes color for Composition Guides, and NOT for Safe Areas and sensor. Reasons are:
- It's important to differentiate between different concepts, having everything one color is distracting
- Safe areas are per-scene and shared with Sequencer preview. The camera shouldn't dictate color there.
I have separate plans about handling safe areas in the future.
Images in the PR.
Pull Request: https://projects.blender.org/blender/blender/pulls/143788
Currently, only the visibility of input sockets can be changed dynamically based
on other menu inputs. However, under some circumstances, it can also be useful
to hide certain outputs. For example, the built-in Curve Arc primitive node does
that.
This patch adds support for automatic detection of unused outputs. How to detect
unused outputs is less straight forward compared to inputs. This patch uses the
rule that an output is unused if it always outputs a "fallback value" (typically
0) irrespective of the currently used inputs. If the output is independent of
all inputs, it stays visible though.
There is a new small utility node called "Enable Output". It replaces a value
with it's fallback value unless it is disabled. This simplifies setting up
unused outputs. In theory, a normal switch node can also be used, but that is
less usable and the user will have to hardcode the fallback value for each type
which is not something that is explicitly exposed yet.
Supporting dynamic output visibility is also a prerequisite for exposing some
menu node options as sockets (e.g. in the Arc node).
Pull Request: https://projects.blender.org/blender/blender/pulls/140856
In Render properties > Color Management > Display.
* Off: Directly output image as produced by OpenColorIO. This is not correct
in general, but may be used when the system configuration and actual display
device is known to match the chosen display.
* Automatic: Display images consistent with most other applications, to preview
images and video for export. A best effort is made to emulate the chosen
display on the actual display device.
The option is grayed out when the current OpenColorIO config and display/view
does not support emulation.
Ref #145022, #144911
Pull Request: https://projects.blender.org/blender/blender/pulls/146808
A subset of brushes behave as "anchored" brushes, in that they do not
apply to the surface continually underneath the cursor, but have a
starting point and then are influenced by the mouse movement. These
brushes behave oddly with tablet pressure sensitivity, as they cannot
modulate over the course of the stroke without causing odd behavior.
Currently, the pressure is only sampled at the very beginning of the
stroke, which makes it difficult to control intuitively. Further work
can be done to improve this behavior (e.g. D6603).
The full list of brush types affected is below:
* Grab
* Snake Hook
* Elastic Deform
* Pose
* Boundary
* Thumb
* Rotate
* Cloth with Grab deformation
Resolves#83697
Pull Request: https://projects.blender.org/blender/blender/pulls/146825
This PR adds an option "Affect Gizmo" for custom shape transforms to affect
the transform gizmos. If enabled, this will place the gizmo at the
location and orientation of the "Override Transform" (i.e. in its local space).
For Orientations: The gizmo mode *is* respected. I.e. global mode is aligned to the world etc.
There is a special case for "Gimbal" where it will not follow the orientation of the
"Override Transform" bone. I think it makes sense to keep it that way since this
is about the channels of the bone you are actually manipulating.
The other option is "Use as Pivot" with which the bone is actually rotated
around the override bone. This can be useful for rigs in which shapekeys and
armature deformation is combined
Taken over from #136468
For design task #135429
Co-authored-by: Wayde Moss <wbmoss_dev@yahoo.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/142847
