Eventually this will need to be updated for the new Sheen in general,
but we should probably wait with that until all breaking changes for
the Principled BSDF are done.
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
The library is used by OBJ/PLY exporters, and asset_catalog_tree_view.
Performance of OBJ/PLY export seems to be the same. Blender executable
gets a tiny bit smaller (-5kb) on windows.
Avoid BLI_path_slash_rfind for accessing file-names as NULL is returned
when the path has no slashes, use BLI_path_basename instead.
Also remove 2 cases where BLI_path_basename was inlined.
See: https://projects.blender.org/blender/blender/issues/103343
Changes:
1. Added `BKE_node.hh` file. New file includes old one.
2. Functions moved to new file. Redundant `(void)`, `struct` are removed.
3. All cpp includes replaced from `.h` on `.hh`.
4. Everything in `BKE_node.hh` is on `blender::bke` namespace.
5. All implementation functions moved in namespace.
6. Function names (`BKE_node_*`) changed to `blender::bke::node_*`.
7. `eNodeSizePreset` now is a class, with renamed items.
Pull Request: https://projects.blender.org/blender/blender/pulls/107790
Keep these operations separate to simplify path handling logic & docs.
Many callers passed NULL and there were times paths were passed in which
didn't make any sense (where the paths had already been made absolute).
The typical order is vertex, edge, face(polygon), corner(loop), but in
these three functions polys and loops were reversed. Also use more
typical "num" variable names rather than "len"
Add the ability to retrieve implicit sharing info directly from the
C++ attribute API, which simplifies memory usage and performance
optimizations making use of it. This commit uses the additions to
the API to avoid copies in a few places:
- The "rest_position" attribute in the mesh modifier stack
- Instance on Points node
- Instances to points node
- Mesh to points node
- Points to vertices node
Many files are affected because in order to include the new information
in the API's returned data, I had to switch a bunch of types from
`VArray` to `AttributeReader`. This generally makes sense anyway, since
it allows retrieving the domain, which wasn't possible before in some
cases. I overloaded the `*` deference operator for some syntactic sugar
to avoid the (very ugly) `.varray` that would be necessary otherwise.
Pull Request: https://projects.blender.org/blender/blender/pulls/107059
While replacing the extension with an empty string works,
it required a redundant string-size argument which took a dummy
value in some cases. Avoid having to pass in a redundant string size by
adding a function that strips the extension.
Implements #95966, as the final step of #95965.
This commit changes the storage of mesh edge vertex indices from the
`MEdge` type to the generic `int2` attribute type. This follows the
general design for geometry and the attribute system, where the data
storage type and the usage semantics are separated.
The main benefit of the change is reduced memory usage-- the
requirements of storing mesh edges is reduced by 1/3. For example,
this saves 8MB on a 1 million vertex grid. This also gives performance
benefits to any memory-bound mesh processing algorithm that uses edges.
Another benefit is that all of the edge's vertex indices are
contiguous. In a few cases, it's helpful to process all of them as
`Span<int>` rather than `Span<int2>`. Similarly, the type is more
likely to match a generic format used by a library, or code that
shouldn't know about specific Blender `Mesh` types.
Various Notes:
- The `.edge_verts` name is used to reflect a mapping between domains,
similar to `.corner_verts`, etc. The period means that it the data
shouldn't change arbitrarily by the user or procedural operations.
- `edge[0]` is now used instead of `edge.v1`
- Signed integers are used instead of unsigned to reduce the mixing
of signed-ness, which can be error prone.
- All of the previously used core mesh data types (`MVert`, `MEdge`,
`MLoop`, `MPoly` are now deprecated. Only generic types are used).
- The `vec2i` DNA type is used in the few C files where necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/106638
Implements #95967.
Currently the `MPoly` struct is 12 bytes, and stores the index of a
face's first corner and the number of corners/verts/edges. Polygons
and corners are always created in order by Blender, meaning each
face's corners will be after the previous face's corners. We can take
advantage of this fact and eliminate the redundancy in mesh face
storage by only storing a single integer corner offset for each face.
The size of the face is then encoded by the offset of the next face.
The size of a single integer is 4 bytes, so this reduces memory
usage by 3 times.
The same method is used for `CurvesGeometry`, so Blender already has
an abstraction to simplify using these offsets called `OffsetIndices`.
This class is used to easily retrieve a range of corner indices for
each face. This also gives the opportunity for sharing some logic with
curves.
Another benefit of the change is that the offsets and sizes stored in
`MPoly` can no longer disagree with each other. Storing faces in the
order of their corners can simplify some code too.
Face/polygon variables now use the `IndexRange` type, which comes with
quite a few utilities that can simplify code.
Some:
- The offset integer array has to be one longer than the face count to
avoid a branch for every face, which means the data is no longer part
of the mesh's `CustomData`.
- We lose the ability to "reference" an original mesh's offset array
until more reusable CoW from #104478 is committed. That will be added
in a separate commit.
- Since they aren't part of `CustomData`, poly offsets often have to be
copied manually.
- To simplify using `OffsetIndices` in many places, some functions and
structs in headers were moved to only compile in C++.
- All meshes created by Blender use the same order for faces and face
corners, but just in case, meshes with mismatched order are fixed by
versioning code.
- `MeshPolygon.totloop` is no longer editable in RNA. This API break is
necessary here unfortunately. It should be worth it in 3.6, since
that's the best way to allow loading meshes from 4.0, which is
important for an LTS version.
Pull Request: https://projects.blender.org/blender/blender/pulls/105938
This change aimed to solve the following issues:
- Possible threading issue of two tests writing to the same
file, depending on how the ctest is invoked
- Test using the release directory, and potentially leaving
temp file behind on test failure, breaking code sign on
macOS.
Pull Request: https://projects.blender.org/blender/blender/pulls/106311
For example
```
OIIOOutputDriver::~OIIOOutputDriver()
{
}
```
becomes
```
OIIOOutputDriver::~OIIOOutputDriver() {}
```
Saves quite some vertical space, which is especially handy for
constructors.
Pull Request: https://projects.blender.org/blender/blender/pulls/105594
Previous code was using BKE_mesh_uv_vert_map_get_vert to somewhat
detect identical UV values on mesh vertices. But this was not
handling the case when separate mesh vertices still use the same UV
values (e.g. cube with all six faces mapped to whole image).
Replace usage of BKE_mesh_uv_vert_map_get_vert with a simple "unique UV
value" map, very similar to how OBJ normals are calculated for export.
Measurements on a somewhat extreme case: exporting "Rungholt" Minecraft
level from https://casual-effects.com/data time (Win10, Ryzen 5950X)
goes 2.9sec -> 2.2sec, and resulting file size 486MB -> 231MB. This
particular model has a lot of mesh faces mapping to the same places
in UV map.
On less extreme cases the timings are similar between old and new
code, with a tiny speedup in most tests I've tried.
UV attribute refactor in 6c774feb has changed the logic from "UV data does not exist" to "there's no active UV layer". The repro mesh has a UV layer, but not UV data due to the mesh being only a point cloud.
Pull Request: https://projects.blender.org/blender/blender/pulls/106185
Implements #102359.
Split the `MLoop` struct into two separate integer arrays called
`corner_verts` and `corner_edges`, referring to the vertex each corner
is attached to and the next edge around the face at each corner. These
arrays can be sliced to give access to the edges or vertices in a face.
Then they are often referred to as "poly_verts" or "poly_edges".
The main benefits are halving the necessary memory bandwidth when only
one array is used and simplifications from using regular integer indices
instead of a special-purpose struct.
The commit also starts a renaming from "loop" to "corner" in mesh code.
Like the other mesh struct of array refactors, forward compatibility is
kept by writing files with the older format. This will be done until 4.0
to ease the transition process.
Looking at a small portion of the patch should give a good impression
for the rest of the changes. I tried to make the changes as small as
possible so it's easy to tell the correctness from the diff. Though I
found Blender developers have been very inventive over the last decade
when finding different ways to loop over the corners in a face.
For performance, nearly every piece of code that deals with `Mesh` is
slightly impacted. Any algorithm that is memory bottle-necked should
see an improvement. For example, here is a comparison of interpolating
a vertex float attribute to face corners (Ryzen 3700x):
**Before** (Average: 3.7 ms, Min: 3.4 ms)
```
threading::parallel_for(loops.index_range(), 4096, [&](IndexRange range) {
for (const int64_t i : range) {
dst[i] = src[loops[i].v];
}
});
```
**After** (Average: 2.9 ms, Min: 2.6 ms)
```
array_utils::gather(src, corner_verts, dst);
```
That's an improvement of 28% to the average timings, and it's also a
simplification, since an index-based routine can be used instead.
For more examples using the new arrays, see the design task.
Pull Request: https://projects.blender.org/blender/blender/pulls/104424
