Note that moving to the templated versions of array allocation functions
in [0] caused integer overflow regressions because multiplying by the
`sizeof(type)` caused the following values to be cast to a size_t.
[0]: e85ebb24fe
Add a "Pixel Density" sub-panel to render output settings which
can be used to set the density (as pixels per inch for example).
This is then written to images that support pixel density.
Details:
- The scene has two values a PPM factor and a and base unit.
- The base unit defaults to pixels per inch as this is the most
common unit used.
- Unit presets for pixels per inch/centimeter/meter are included.
- The pixel density is stored in the render result & EXR cache.
- For non 1:1 aspect renders, the density increases on the axis
which looks "stretched", so the PPM will print the correct
aspect with non-square pixels.
Ref !127831
To make adding a dependeny on TBB easier.
Additional changes:
* Using LIB for libmv tests, as it now brings in includes
* Removing Eigen header listing in iTaSC
Pull Request: https://projects.blender.org/blender/blender/pulls/136865
This replaces the deprecated DrawData mechanism by the
usage of the update timestamp `last_update`.
The compositor keeps the `last_update` value of the cached ID
and compares it with the value on the ID at the time of evaluation.
Rel #134690
Pull Request: https://projects.blender.org/blender/blender/pulls/134878
This refactor part of `draw_manager_c.cc` to make it more understandable
and less bug prone.
- Splits the context handing to `draw_gpu_context.cc`
- Rename `draw_manager_c.cc` to `draw_context.cc`
- Merge `DRWContextState` into `DRWContext`
- Merge lots of static functions into `DRWContext` to avoid global access
- Deduplicate code between entry point functions
- Move context init logic to `DRWContext` constructor
- Move resource init logic to `DRWContext::acquire_data`
- Move extraction `TaskGraph` out of `DRWContext`
- Reduce / centralize complexity of enabling draw engines
- Reduce the amount of `drw_get` calls
- Remove unused code
Pull Request: https://projects.blender.org/blender/blender/pulls/135821
The main issue of 'type-less' standard C allocations is that there is no check on
allocated type possible.
This is a serious source of annoyance (and crashes) when making some
low-level structs non-trivial, as tracking down all usages of these
structs in higher-level other structs and their allocation is... really
painful.
MEM_[cm]allocN<T> templates on the other hand do check that the
given type is trivial, at build time (static assert), which makes such issue...
trivial to catch.
NOTE: New code should strive to use MEM_new (i.e. allocation and
construction) as much as possible, even for trivial PoD types.
Pull Request: https://projects.blender.org/blender/blender/pulls/135813
Since the introduction of e53ac805af, viewer and previews were not
computed when rendering, because we assumed those would only be useful
during interactive compositing. But we received multiple reports that
this is broken. So users generally expect rendering to compute viewers
and previews.
This patch makes a distinction between background rendering and F12
renders, where the latter computes viewer and previews. This should not
have significant effect on the render time, because typically viewer
results are already computed as part of computing composite results.
Pull Request: https://projects.blender.org/blender/blender/pulls/135723
This PR creates 2 namespaces for VSE code:
- `blender::seq` for sequencer core code
- `blender::ed::vse` for editor code
These names are chosen to not be in conflict with each other.
No namespace was used for RNA.
Finally, file `BKE_sequencer_offscreen.h` was moved from BKE to sequencer.
Pull Request: https://projects.blender.org/blender/blender/pulls/135500
The offset calculation would overflow inside `ibuf_get_color` given the
incoming arguments and image size.
Another similar problem, found from quick inspection, would occur inside
`ibuf_get_color_clip` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/135476
The general idea is to keep the 'old', C-style MEM_callocN signature, and slowly
replace most of its usages with the new, C++-style type-safer template version.
* `MEM_cnew<T>` allocation version is renamed to `MEM_callocN<T>`.
* `MEM_cnew_array<T>` allocation version is renamed to `MEM_calloc_arrayN<T>`.
* `MEM_cnew<T>` duplicate version is renamed to `MEM_dupallocN<T>`.
Similar templates type-safe version of `MEM_mallocN` will be added soon
as well.
Following discussions in !134452.
NOTE: For now static type checking in `MEM_callocN` and related are slightly
different for Windows MSVC. This compiler seems to consider structs using the
`DNA_DEFINE_CXX_METHODS` macro as non-trivial (likely because their default
copy constructors are deleted). So using checks on trivially
constructible/destructible instead on this compiler/system.
Pull Request: https://projects.blender.org/blender/blender/pulls/134771
The compositor backdrop is still visible even after a new completely
different file is loaded. This is because compositor contexts cache
things like the backdrop, and contexts are stored on interactive
compositor renders, which are not freed until Blender is closed. To fix
this, we cleanup the interactive compositor renders that were created
upon file load.
Pull Request: https://projects.blender.org/blender/blender/pulls/135390
The RE_render_result_rect_from_ibuf function (used only by VSE) was
allocating memory for the render result, clearing it to zero and
immediately overwriting it with the image pixel data. Remove the
"clear to zero" part.
Rendering a 1920x1080 resolution movie with VSE (using float
pixel data), average RE_render_result_rect_from_ibuf time goes from
6.8ms down to 3.8ms
Pull Request: https://projects.blender.org/blender/blender/pulls/135170
There's no point in having non-threaded image color space conversion functions.
So merge the threaded and non-threaded functions and clarify names while at it:
- IMB_colormanagement_transform & IMB_colormanagement_transform_threaded
-> IMB_colormanagement_transform_float
- IMB_colormanagement_transform_byte & IMB_colormanagement_transform_byte_threaded
-> IMB_colormanagement_transform_byte
- IMB_colormanagement_transform_from_byte & IMB_colormanagement_transform_from_byte_threaded
-> IMB_colormanagement_transform_byte_to_float
These places were doing single-threaded colorspace conversion previously, and
thus now are potentially faster:
- IMB_rect_from_float (used in many places)
- EXR image "save as render" saving (image_exr_from_scene_linear_to_output)
- Object baking (write_internal_bake_pixels, write_external_bake_pixels)
- General image saving, clipboard copy, movie preparation
(IMB_colormanagement_imbuf_for_write)
- Linear conversion when reading HDR images/movies
(colormanage_imbuf_make_linear)
- EXR multi-layer conversion (render_result_new_from_exr)
For one case I benchmarked, which is to render out a 2D stabilized 10 bit input
movie clip out of VSE, the total render time went from 49sec down to 44sec
(Ryzen 5950X), one of the single-threaded parts was the colorspace conversion
in the movieclip code.
Pull Request: https://projects.blender.org/blender/blender/pulls/135155
Hydra's viewport and final engines conflict on whether the rendering loop
is internal or external. The old approach works for Hydra Delegates that
converge with a single sample (hdStorm) but causes engines relying on sample
accumulation (hdEmrbee) to become stuck.
This minimal change retains compatibility with delegates like Storm while
replicating the behavior of the viewport engine in the final engine.
Pull Request: https://projects.blender.org/blender/blender/pulls/134804
The compositor previously overloaded the vector type to represent
multiple dimensions that are always stored in a 4D float vector. This
patch introduce a dedicated type for float4, leaving the vector type to
always represent a 3D vector, which will be done in a later commit.
This is not exposed to the user as a separate socket type with a
different color, it is only an internal type that uses the same vector
socket shape and color.
Since the vector socket represents both 4D and 3D vectors, code
generally assumes that such sockets represents 3D vectors, and the
developer is expected to set it to a 4D vector if needed in the node
operation constructor, or use the newly added skip_type_conversion flag
for nodes that do not care about types, like the File Output node.
Though this should be redundant once we add a dimension property for
vector sockets.
Pull Request: https://projects.blender.org/blender/blender/pulls/134486
This patch removes the compositor texture pool implementation which
relies on the DRW texture pool, and replaces it with the new texture
pool implementation from the GPU module.
Since the GPU module texture pool does not rely on the global DST, we
can use it for both the viewport compositor engine and the GPU
compositor, so the virtual texture pool implementation is removed and
the GPU texture pool is used directly.
The viewport compositor engine does not need to reset the pool because
that is done by the draw manager. But the GPU compositor needs to reset
the pool every evaluation. The pool is deleted directly after rendering
using the render pipeline or through RE_FreeUnusedGPUResources for the
interactive compositor.
Pull Request: https://projects.blender.org/blender/blender/pulls/134437
This patch refactors the Result class in the compositor to use
GMutableSpan and std::variant to wrap the result's data. This reduces
the complexity of the code and slightly optimizes performance. This will
also make it easier to add new types and interface with other code like
multi-function procedures.
Pull Request: https://projects.blender.org/blender/blender/pulls/134112
This patch allows the compositor context to specify exactly which
outputs it needs, selecting from: Composite, Viewer, File Output, and
Previews. Previously, the compositor fully executed if any of those were
needed, without granular control on which outputs are needed exactly.
For the viewport compositor engine, it requests Composite and Viewer,
with no Previews or File Outputs.
For the render pipeline, it requests Composite and File Output, with
node Viewer or Previews.
For the interactive compositor, it requests Viewer if the backdrop is
visible or an image editor with the viewer image is visible, it requests
Compositor if an image editor with the render result is visible, it
requests Previews if a node editor has previews overlay enabled. File
outputs are never requested.
Pull Request: https://projects.blender.org/blender/blender/pulls/133960
* Disable Metal multisampling to match OpenGL.
* Block list all image half/float tests, these can all fail randomly.
* Blocklist tests failing due to issues in OpenUSD Metal implementation.
There is a special case in the compositor code where viewer nodes are
treated as composite nodes. This patch renames relevant methods and
updates comments to clarify this use case.
Pull Request: https://projects.blender.org/blender/blender/pulls/133811
10/12bpp movie writing code assumes that input image is properly
floating point for these cases. That is always true for regular
rendering, however VSE can produce 8bpp images, if there
are no float/HDR strips in there. Make these convert into a float
image in the render pipeline when needed.
Pull Request: https://projects.blender.org/blender/blender/pulls/133802
This patch introduces a new Derived Resources concept to the compositor.
Derived resources are resources that are computed from a particular
result and cached in it in case it is needed by another operation, which
can greatly improve performance in some cases at the cost of more memory
usage.
The first use case is to store denoised versions of the Denoising Albedo
and Denoising Normals passes if auxiliary pass denoising is enabled in
the denoise node. Consequently, multi-pass denoising setups where the
same auxiliary passes are used in multiple denoise nodes should be much
faster due to caching of the derived resources.
This implementation has the limitation that it can't preemptively
invalidate the cache when the derived resources are no longer needed to
free up memory. This requires a special resource tracking mechanism that
need to happen during node tree compilation, and will be submitted
later. The limitation is not significant in the particular derived
resources that is currently implemented. Since the auxiliary passes are
rarely used outside of denoising.
Fixes#131171.
Pull Request: https://projects.blender.org/blender/blender/pulls/125671
* Ensure valid bit depth is set along with file type
* Guard against invalid inputs in stereo imbuf creation
* Remove some unused code
Thanks Yiming Wu for finding the cause.
Pull Request: https://projects.blender.org/blender/blender/pulls/133499
