This implements four optimizations in the Set Position node:
* Check whether the position input is the current position and ignore
it if it is. This results in a speedup when only the Offset input is used.
* Use multi-threading when copying to computed values to the
position attribute. All geometry types benefit from this.
* Use devirtualization for the offset and position input. This optimizes
the common case that they are either single values or computed
in the fly in a span.
* Write to `Mesh->mvert` directly instead of creating a temporary span.
This makes setting mesh vertex positions even more efficient.
In my simple benchmark I'm using a White Noise node to offset the
position of 1,000,000 vertices. The speed is `20 ms -> 4.5 ms` in the
multi-threaded case and `32 ms -> 22 ms` in the single-threaded case.
For some underlying data (e.g. spans) we had two virtual array
implementations. One for the mutable and one for the immutable
case. Now that most code does not deal with the virtual array
implementations directly anymore (since rBrBd4c868da9f97a),
we can get away with sharing one implementation for both cases.
This means that we have to do a `const_cast` in a few places, but
this is an implementation detail that does not leak into "user code"
(only when explicitly casting a `VArrayImpl` to a `VMutableArrayImpl`,
which should happen nowhere).
This leads to division by zero in Freestyle's NoiseShader which also
crashes blender.
Not sure if we really need a do_version patch for old files, as an
alternative we could also force a positive number in the NoiseShader.
This patch does not do either, just force a positive range in RNA from
now on.
Maniphest Tasks: T89081
Differential Revision: https://developer.blender.org/D13332
This broke with {rB20fac2eca723} (which landed in 2.63), so long
standing bug.
Convention for paint modes is:
- when no paint mask is active, `Frame Selected` will focus the last
stroke
- when paint mask is active, `Frame Selected` will focus the selected
mask faces
To check the right vert coords we have to offset with `mp->loopstart`.
Maniphest Tasks: T93130
Differential Revision: https://developer.blender.org/D13247
Caused by {rBaf162658e127}, so long standing bug.
When changing clone slots (report involved a quite complicated sequence
of selecting textures and undo -- but I think this could happen in more
situations) code checks for UV of new clone slot.
However, since above commit the slot and the clone slot were mixed up,
so in this case the responsible NULL check (for when no UV is assigned)
wasnt working.
Now correct this (NULL check the clone slot uv -- instead of the paint
slot UV).
note: not sure why low level CustomData functions actually dont do the
name NULL checks themselves (seems like callers are always responsible).
Maniphest Tasks: T93117
Differential Revision: https://developer.blender.org/D13378
This was crashing using the clone tool without a clone image assigned.
Caused by {rB9111ea78acf4}.
Since above commit, `BKE_image_acquire_ibuf` was using `ima->runtime`
without checking for NULL first.
Since callers are not required to check for this, just return early
here.
note: there is still a memory leak using the clone tool without a clone
image assigned (but this was also the case before said commit and needs
to be investigated separately).
Maniphest Tasks: T93380
Differential Revision: https://developer.blender.org/D13377
Instead of drawing the mask layers in the sequence of their occurence, draw the active mask *always* on top.
Implementation:
- move drawing loop for splines to separate static function
- draw active mask last
Example: lowest layer is active, yet still drawn on top.
{F12140355}
This is part of an effort to make mask editing more intuitive & easy to use: https://developer.blender.org/T93097
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13372
Previously, there was a fixed grain size for all multi-functions. That was
not sufficient because some functions could benefit a lot from smaller
grain sizes.
This refactors adds a new `MultiFunction::call_auto` method which has the
same effect as just calling `MultiFunction::call` but additionally figures
out how to execute the specific multi-function efficiently. It determines
a good grain size and decides whether the mask indices should be shifted
or not.
Most multi-function evaluations benefit from this, but medium sized work
loads (1000 - 50000 elements) benefit from it the most. Especially when
expensive multi-functions (e.g. noise) is involved. This is because for
smaller work loads, threading is rarely used and for larger work loads
threading worked fine before already.
With this patch, multi-functions can specify execution hints, that allow
the caller to execute it most efficiently. These execution hints still
have to be added to more functions.
Some performance measurements of a field evaluation involving noise and
math nodes, ordered by the number of elements being evaluated:
```
1,000,000: 133 ms -> 120 ms
100,000: 30 ms -> 18 ms
10,000: 20 ms -> 2.7 ms
1,000: 4 ms -> 0.5 ms
100: 0.5 ms -> 0.4 ms
```
Affect and effect are too confusing for non-native english speakers
(like me). Also BAKING_MASK_MARGIN doesn't exist anymore in the code.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D13361
Under some circumstances that can lead to more than a 2x
performance increase, because math nodes can better optimize
for the case when the slice is a single value or span.
Caused by 6b0869039a
Above commit introduced selection after renaming. This includes calling
`file_select_deselect_all` [which resorts and refilters].
So now, to have the correct file for scrolling, get it again after
sorting by calling `file_params_find_renamed` again.
Differential Revision: https://developer.blender.org/D13368
A minor cosmetic fix. When the view was scrolled all the way to the
bottom, the lowest panel would end right on the view edge. The
scrollable view should get the same margin at the bottom as used at the
top.
This corrects some alignments issues through new margins introduced in
93544b641b. Basic idea of this fix is to only add the new margins when
drawing a panel with background. These margins were added specifically
for the background boxes, so that makes sense.
Alternative fix to D13199.
This also fixes some margings added unintentionally in mentioned commit.
There is a little jump of the toolbar and the tabs in the Properties
when comparing the UI without this fix to 2.93:
{F12158085} {F12158039}
The jump is gone with this fix applied (compare to the 2.93 screenshot):
{F12158064}
While not a serious issue, this confirms that this fix actually tackles
the root of the issue.
Don't use the side padding for menu item contents when displaying
previews or icons in a row or grid layout. This can cause problems for
the preview drawing and doesn't make sense to draw there anyway.
This not only fixes the mentioned issue, but also too small heighlight
for the collection color tag in the Outliner context menu.
Alternative to and similar to D13125.
Assigning a catalog to an asset via drag-and-drop in the asset browser
now creates an undo step. Not only does this allow undoing the action,
it also tags the blend file as modified.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13370
This fixes a crash when muting the "Group Output" node.
It should not be possible to mute it so this patch
sets the `no_muting`-variable on it.
Differential Revision: https://developer.blender.org/D13364
Liboverride properties and operations list need to be fully up-to-date
before libraries are reloaded, otherwise re-applying those liboverrides
after linked data is reloaded may miss some changes.
This reverts the changes to fix T87448, where entering the same value in number
buttons causes an unnecessary update. This is not stable enough for 3.0 and so
is being reverted, better to have an unnecessary update than no update in other
cases.
This effectively reverts the changes from rBeb06ccc32462 and follow up fixes
rBe1a9ba94c599, rBbbb52a462ef9, rBec30cf0b742f, and rB071799d4fc44. The code is
disabled with a comment on how it could be implemented better.
Bug introduced in {rBaa0ac0035a0d}.
The invalid depth fallback was changed to `FLT_MAX` in order to match the
annotation and gpencil operations.
This broke the `Interactive Light Track` operator which invalidates the
operation if the depth value is `1.0f`.
The chosen solution was to change the value tested in the annotation and
gpencil operations.
Caused by {rBcf2baa585cc8}.
For Curve Guide force fields to work, the `Path Animation` option has to
be enabled. With it disabled, we are lacking the necessary
`anim_path_accum_length` data initialized [done by
`BKE_anim_path_calc_data`] which `BKE_where_on_path` relies on since
above commit.
Now just check for this before using it - and return early otherwise.
Prior to said commit, `BKE_where_on_path` would equally return early
with a similar message, so that is expected behavior here.
Maniphest Tasks: T93338
Differential Revision: https://developer.blender.org/D13371
The issue was that the attribute propagation in the Fillet Curve node seems
pretty broken. I couldn't really make sense of the old code. It changed the
size of the point attribute domains on splines to 1 for some reason which
led to a crash in the next node.
Differential Revision: https://developer.blender.org/D13362
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
NOTE: Since this change introduce issues for some cases (e.g. bound
modifiers like SurfaceDeform), this change is only applied to newly
created modifiers, existing ones will still use the old incorrect merge
behavior.
Reviewed By: @brecht
Maniphest Tasks: T93321, T91444
Differential Revision: https://developer.blender.org/D13355
Revert "Fix T91444: Edge Loop Preview fails with two Mirror Modifiers"
This reverts commit 1a7757b0bc.
Caused issue reported in T93321, boiling down to the fact that other
operations or modifiers (like the SurfaceDeform one) rely on the order
of the vertices in the mesh to remain consistent.
Changing this in a modifier would mean those operations need to be
reset/re-created (e.g. rebound for the SurfaceDeform case), which is not
doable in `do_version` code.
A parallel loop to create the interesection meshes for each triangle
meant that with parallelism, the output order of the created meshes
could vary with each execution. Keep the parallelism for doing the CDTs
for interesection, but move the extraction of the new faces into a
serial loop afterwards, for repeatability.
This commit improves the scaling of some ui widgets when
zooming by making the radius of the rounded corners
dependent on the element's zoom level.
Needed to fix T92278 without padding issues, see D13125.
Reviewed By: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D12842
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
Changes icon used to indicate blend file when overlaid over larger
document icon when in thumbnail view. Only seen when file does not
have a preview.
Followup to {rB611e4ffaab43}
For more details and examples see D13342
Differential Revision: https://developer.blender.org/D13342
Reviewed by Julian Eisel
