Caused by {rB841df831e89d} and {rB3558bb8eae75}.
These commits moved flags from `eLineArtGPencilModifierFlags` to
`eLineartMainFlags`, but later on in code, these were still evaluated
from the modifiers `flags` (instead of `calculation_flags`).
This resulted in a false condition (`match_output` was assumed true but
it wasnt), leading to a wrong codepath taken.
This is now corrected (`calculation_flags` need to be passed around for
this as well).
Maniphest Tasks: T103887
Differential Revision: https://developer.blender.org/D17062
This also fixes the layout of boolean properties with the field toggle
visible. This was discussed in the most recent geometry nodes submodule
meeting.
This uses the changes from ef68a37e5d to create IDProperties
for exposed boolean sockets with a boolean type instead of an integer
with a [0,1] range. Existing properties and values are converted
automatically.
For forward compatibility, the properties are switched to the integer
type for saving. Otherwise older versions crash immediately when opening
a newer file. The "Use Attribute" IDProperties aren't changed here,
since that wouldn't have a visible benefit.
Differential Revision: https://developer.blender.org/D12816
This adds 4 collection properties to MeshUVLoopLayer to eventually replace the (MeshUVLoop) .data property.
The added properties are:
.uv
.vertex_selection
.edge_selection
.pin
The direct access to the separate arrays is much more efficient than the access via MeshUVLoop.
Differential Revision: https://developer.blender.org/D16998
Caused by 05952aa94d, which removed the use of the
active tessface UV pointer on meshes but didn't replace it properly with
the equivalend custom data API function.
This improves performance in cases where the Set Position node is "turned off"
by passing `false` into the selection input.
It's possible that the node still takes some time in this case currently, because
it is destructing the input fields which may reference geometries that need
to be destructed as well. We could potentially change this node (and others)
so that the field inputs are only requested when the selection is not a
constant `false`.
This adds the following operators to edit mode:
- `select_all`
- `select_random`
- `select_end`
Differential Revision: https://developer.blender.org/D17047
This adds an `UndoType` for the `Curves` object, for edit mode.
For now, this will only store the `CurvesGeometry` at every step.
Other properties such as the `selection_domain` or the `surface` object
will have to be dealt with in subsequent commits.
Differential Revision: https://developer.blender.org/D16979
This was not done originally, because one had to iterate over all curves
to get the number of points which had some overhead. Now the number
of points is stored all the time anyway.
The `fix_link_cycles` function added in rB2ffd08e95249df2a068dd did not
handle the case correctly when there are multiple cycles going through
the same socket.
Existing path selection & new path picking included without UV's.
Now limit objects to those with UV's.
Also remove use of CTX_wm_view3d(C) in the UV editor it would be NULL,
but it doesn't makes sense to use the 3D viewport for UV operations
even if it was available.
This adds a new `Interpolate Curves` node. It allows generating new curves
between a set of existing guide curves. This is essential for procedural hair.
Usage:
- One has to provide a set of guide curves and a set of root positions for
the generated curves. New curves are created starting from these root
positions. The N closest guide curves are used for the interpolation.
- An additional up vector can be provided for every guide curve and
root position. This is typically a surface normal or nothing. This allows
generating child curves that are properly oriented based on the
surface orientation.
- Sometimes a point should only be interpolated using a subset of the
guides. This can be achieved using the `Guide Group ID` and
`Point Group ID` inputs. The curve generated at a specific point will
only take the guides with the same id into account. This allows e.g.
for hair parting.
- The `Max Neighbors` input limits how many guide curves are taken
into account for every interpolated curve.
Differential Revision: https://developer.blender.org/D16642
During 3D texturing the uv islands are extended in order to fix seam bleeding
for manifold parts of the input mesh. This patch adds a `print_debug` method
on UVIsland that generates a python script. This script can be copy-past
into the Python Console to show the generated geometry.
This script can be extended to show the extracted border and use face colors
for showing internal decisions.
Swap-buffers was being deferred (to prevent it being called
from the event handling thread) however when it was called the
OpenGL context might not be active (especially with multiple windows).
Moving the cursor between windows made eglSwapBuffers report:
EGL Error (0x300D): EGL_BAD_SURFACE.
Resolve this by removing swapBuffer calls and instead add a
GHOST_kEventWindowUpdateDecor event intended for redrawing
client-side-decoration.
Besides the warning, this results an error with LIBDECOR window frames
not redrawing when a window became inactive.
Fixes the packing operators that use ED_uvedit_pack_islands_multi
Also fixes UV Select Similar with hidden UV islands.
Packing operators using GEO_uv_parametrizer should remain unchanged.
Add a check to BM_elem_flag_test(efa, BM_ELEM_HIDDEN).
Note that BM_mesh_calc_face_groups doesn't easily support XOR of flags,
requiring logic to be moved to a preprocess step on BM_ELEM_TAG.
Regression in rBe3075f3cf7ce.
Differential Revision: https://developer.blender.org/D17055
Path selection support from [0] didn't account for multiple objects in
edit-mode. Now picking the UV also picks the object to operate on.
[0]: ea5fe7abc1
Add:
- ED_object_in_mode_to_index
- ED_object_in_mode_from_index
Useful for operators that act on a non-active object in multi-edit mode,
so the index can be stored for the operators exec function to read back
the value when redoing an action. Needed to resolve T102680.
Fixes bug where other islands sometimes get their masks cleared (or
filled) in strange circumstances. Still need to figure out the
correct behavior for spherical falloff.
Mesh islands (shells) are now calculated on an as-needed
basis and cached inside of a temp attribute,
`sculpt_topology_island_key`. This attribute is updated
as needed when geometry changes (e.g. the trim brush)
or when mesh visibility changes.
This replaces the old behavior where the "topology" automasking
mode would walk the entire mesh on every stroke.
Add an RNA API function that gives an array of the normals for every control point.
The normals depend on the `normal_mode` attribute, which can currently be
minumum twist or Z-up, though more options are planned. Normals are currently
evaluated on the evaluated points and then sampled back to the control points.
Because that can be expensive, a normal mode that only does a first evaluation
on control points may be important
The function is intended to be used by Cycles, so it doesn't have to implement
the calculation of normals itself. They can be interpolated between control points
and normalized.
For best performance, the function should only be called once, since it does the
full calculation for every control point every time it is called.
Differential Revision: https://developer.blender.org/D17024
Based on discussion about T102962, rename the "Face Set Boundaries" node
to "Face Group Boundaries" and the Accumulate Field node's "Group Index"
socket to "Group ID". This convention of "__ Group" and "Group ID" will
be used more in other nodes in the future.
This commit doesn't affect forwards or backwards compatibility.
