The Grease Pencil `Clipboard` only stored a single `CurvesGeometry`. This meant
that the `Paste by Layer` operation (from 4.2 LTS) couldn't be implemented.
This PR adds an `Array` of `ClipboardLayer`s to the `Clipboard`. Each layer stores
the name of the Grease Pencil layer that it was copied from and the `CurvesGeometry`.
The `grease_pencil.paste` operator has a new property `type` (`ACTIVE` or `LAYER`)
that decides how to paste the strokes.
Using the `ACTIVE` type, the strokes of all the `ClipboardLayer`s get merged and then
pasted to the active layer.
Using the `LAYER` type, we first try to find layers to paste the `ClipboardLayer`s into.
We just look for matching layer names. If no matching layer is found, the strokes are
pasted into the active layer instead.
This should be consistent with how Grease Pencil used to behave in 4.2. LTS.
Pull Request: https://projects.blender.org/blender/blender/pulls/134168
Move cavity properties to a separate subpanel, instead of being
in-between unrelated settings.
Avoids issues with add-ons appending to the "Options" subpanel, which
would push cavity properties back to the middle.
Properties are now greyed out (instead of hidden) when unavailable
due to X-Ray being enabled.
More details and screenshots in pull request.
Pull Request: https://projects.blender.org/blender/blender/pulls/133944
Similar to how brush assets are created and managed this
PR allows to export pose assets into a different library.
Because of this there is a limitation to this where each
asset is stored in a separate blend file.
This may be lifted in the future as there are planned changes in
the design phase: #122061
### Create Asset
Now available in the 3D viewport in the "Pose" menu: "Create Pose Asset".
The button in the Dope Sheet will now call this new operator as well.
Clicking either of those will open a popup in which you can:
* Choose the name of the asset, which library and catalog it goes into.
* Clicking "Create" will create a pose asset on disk in the given library.
It is possible to create files into an outside library or add it in the current file.
The latter option does a lot less since it basically just creates the
action and tags it as an asset.
If no Asset Shelf **AND** no Asset Browser is visible anywhere in Blender,
the Asset Shelf will be shown on the 3D viewport from which
the operator was called.
### Adjust Pose Asset
Right clicking a pose asset that has been created in the way described
before will have options to overwrite it.
Only the active object will be considered for updating a pose asset
Available Options (the latter 3 under the "Modify Pose Asset" submenu):
* Adjust Pose Asset: From the selected bones, update ONLY channels that
are also present in the asset. This is the default.
* Replace: Will completely replace the data in the Pose Asset from
the current selection
* Add: Adds the current selection to the Pose Asset. Any already existing
channels have their values updated
* Remove: Remove selected bones from the pose asset
Currently this refreshes the thumbnail. In the case of custom
thumbnails it might not be something want
### Deleting an existing Pose Asset
Right click on a Pose Asset and hit "Delete Pose Asset". Works in the shelf
and in the asset library. Doing so will pop up a confirmation dialog,
if confirming, the asset is gone forever. Deleting a local asset is basically the
same as clearing the asset. This is a bit confusing because you get
two options that basically do the same thing sometimes,
but "Delete" works in other cases as well.
I currently don't see a way around that.
Part of design #131840
Pull Request: https://projects.blender.org/blender/blender/pulls/132747
This fixes an issue where the Canvas button is always disabled when
trying to use the experimental feature, Sculpt Texture Paint.
This bug was caused by the new Asset System since it changed how paint
tools work. Before, the UI would check the current tool being used and
determine if the Canvas button should be activated. With the new Asset
System, painting is done with modular brushes instead of tools, so
previous methods of checking tool properties have stopped working.
This is fixed by activating the Canvas button based on the properties
of the current brush. If the brush's type is either Paint or Smear,
then the Canvas button is activated.
Co-authored-by: T0MIS0N <50230774+T0MIS0N@users.noreply.github.com>
Pull Request: https://projects.blender.org/blender/blender/pulls/133566
This implements all the auto masking options in sculpt mode.
* Stroke: Only affects strokes that are initially under the cursor.
* Layer: Only affect strokes in the same layer as the initial strokes under the cursor.
* Material: Only affect strokes with the same material as the initial strokes under the cursor.
* Active Layer: Only affect strokes in the active layer.
* Active Material: Only affect strokes that use the active material.
The `Active Layer` toggle in the toolbar has been moved to this panel.
Resolves#130022.
Pull Request: https://projects.blender.org/blender/blender/pulls/132986
The interpolate tool was using a linear re-sampling of the curves, which changes
non-uniform point distributions can causes unexpected shifts in points along the
curve, even very close to an input stroke (mix factor ~0 or ~1).
This patch adds an alternative interpolation function with explicit segment
indices and fractions, which can then be computed by the interpolation tool.
The point segment factors are chosen such that each point of the input strokes
has an exact matching point in the interpolation. When the factor is close to
0 or 1 the shape of the curve thus matches the respective input exactly.
This approach is more similar to what GPv2 did, except instead of sub-dividing
each segment it simply generates a _local_ uniform sample to fit more points
into the same segment. These extra points are colinear at the extremes of the
mix factor range, so the curve matches the input curves visually.
Pull Request: https://projects.blender.org/blender/blender/pulls/130594
Use operator context of 'INVOKE_DEFAULT' for object.data_transfer and
object.datalayout_transfer in menu VIEW3D_MT_make_links so that they
work correctly when called from popup menus.
Pull Request: https://projects.blender.org/blender/blender/pulls/133228
Show the Indices overlay setting regardless of Developer Extras being
turned on or not.
With the introduction of Geometry Nodes, having access to the indices
is handy outside of development environments (as well as in game
development or to debug i/o issues).
Pull Request: https://projects.blender.org/blender/blender/pulls/133095
The hardcoded value doesn't work well with real scale human heads for
example (was already adjusted once in a76b5d3a07).
The result for too high values is a complete "freeze" of the whole curve
(since the solution from e7606139ba has the problem that it keeps
running into max iterations of the collision solver).
As long as no better solver is implemented, it is better to have an
adjustable value (to work on differently sizes objects) to not run into
the above issue (same as the old particle hair system had) and show it
in sculptmode next to the button which enables collision.
This is done per `Curves` (same as the flag
`CV_SCULPT_COLLISION_ENABLED`), similar to symmetry settings
[alternatively, it could be part of `BrushCurvesSculptSettings` but I
think it makes more sense in Curves] and then passed on to the
`CurvesConstraintSolver`.
Includes versioning code (to set the default for old files).
Pull Request: https://projects.blender.org/blender/blender/pulls/132997
- Wrap the closing parenthesis onto it's own line
which makes assignments to the return value
read better.
- Reduce right-shift with multi-line function calls.
"Smooth" can be many things, but mostly a verb or adjective depending
on context.
Already handled in the past, but some things were missed or introduced
since then.
"End" in "Clip End" can be better translated to something like "Far"
in some languages. Using the "Camera" context even when it's not
specifically a camera clipping (also affects light probes).
Issue reported by Gorazd-Gorup.
The removal of the UNDO flag to prevent adding undo steps when using the
`paint.sample_color` operator results in the "Sample Merged" option
being inaccessible to users without them adding a keymap of their own.
This commit makes the following changes:
* For Texture Paint using the default blender keymap, the Shift-Ctrl-X
keybind is assigned to this operator with the merged option set to True
* For Texture Paint, using the industry compatible keymap, the Shift-I
keybind is assigned to this operator with the merged option set to
True
This parameter is only relevant for 3D Texture Painting so it is not
added to the other modes.
For all other `paint.sample_color` entries in both the keymap and in
some menus, the `merge` option is explicitly set to False.
Ref: #101144
Pull Request: https://projects.blender.org/blender/blender/pulls/132047
When releasing the pen the pressure would always go back to zero,
undoing the effect of the brush. To fix this, don't take pressure into
account for the strength, and don't display it in the UI. The grab brush
in mesh sculpt mode works the same way.
Pull Request: https://projects.blender.org/blender/blender/pulls/131744
The issue was that the UI code still used the unified paint settings.
It was decided that in `PAINT_GREASE_PENCIL` mode we don't use
the unified paint settings and always use the settings on the brush.
The fix uses the `brush` as the owner of the `color` property instead
of the unified paint settings.
Pull Request: https://projects.blender.org/blender/blender/pulls/131452
The stroke simplify operator was implemented at the beginning of GPv3
migration, which means it lacked a few other modes. This fix reused the
same code as in the simplify modifier to provide more simplify modes
back to the modifier so it can work just like GPv2.
Resolves#130616.
Pull Request: https://projects.blender.org/blender/blender/pulls/131076
Always use the Brush.color setting in the Draw mode side bar.
Technically the "Color" panel in the sidebar can draw in other modes,
but it's polling for explicit tools that limit it to the Draw mode
implicitly.
Use the appropriate brush or unified color in other GP modes based on
the unified paint settings flag.
Worth noting this was technically broken for a long time:
The default was that unified paint is disabled, so the GP panels would
use the brush color as expected. Enabling unified paint would then break
the colors, probably wasn't done very frequently since GP files
and e.g. mesh sculpting don't mix often. The default was changed in
#129127 to enable unified paint by default, which now breaks GP colors
by default.
Pull Request: https://projects.blender.org/blender/blender/pulls/129790
Accidentally added in d70b10dcd4 and moved in dc652aeedb, the
`GREASE_PENCIL_OT_stroke_trim` operator is meant for usage in draw mode
(as the Cutter tool), but not in editmode. It is not the same as the
GPv2 Trim operator, see 4fbef3dc6b
To resolve, remove this from the menu again.
Pull Request: https://projects.blender.org/blender/blender/pulls/129805
With the brush assets project, many paint tools are no longer specified
by tool. To maintain functionality, this commit inspects the brush type
instead of hardcoding against the paint tool to ensure that no matter
which tool is being used, the UI displays correctly based on the brush.
Pull Request: https://projects.blender.org/blender/blender/pulls/129654
All sculpt and paint modes should have the brush selector asset shelf
popup in the tool settings header. For curves sculpt mode this was
missing. There's no good reason for this, probably just an oversight.
