When loading huge images (30k) blender crashed with a buffer overflow.
The reason is that determine the length of a buffer was done in 32bit
precision and afterwards stored in 64 bit precision.
This patch adds a new function to do the correct calculation in 64bit.
It should be added to other sections in blender as well. But that should
be tested on a per case situation.
When rendering volume surfaces in unbounded worlds the volume stepping can produce large values. If used with a magic texture node the values can results in a Inf float which when used in a sin or cos produces a NaN.
To fix this the input values are mapped into the periodic range of the sin and cos functions (-2*PI 2*PI) this stops the possibility of a Inf occurring and thus the NaN. It also improves the accuracy and smoothness of the result due to loss of precision when large values are summed with smaller ones effectively removing the parts of the smaller number (i.e. those in the -2PI to 2PI range) that result in variation of the output of sin and cos.
Reviewed By: brecht
Maniphest Tasks: T92036
Differential Revision: https://developer.blender.org/D12821
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
In the `replace_mesh`/`replace_curve` etc. methods, the component
was retrieved with write access. Retrieving with write access will
duplicate the data if the component has another user. This means that
the replaced geometry data was often duplicated just to be deleted
a moment later.
I expect this would have a large impact in performance in some specific
situations when dealing with large geometry. In a scene with many small
meshes though, I didn't observe a significant difference.
This also makes replacing a geometry set's data with the same data
that's already in the set safe. It would be valid to assert for that
case instead, but this seems safer.
Differential Revision: https://developer.blender.org/D13530
I'm planning to make these functions slightly more complicated,
and it makes sense to return early when checking one of the parameters
for null anyway.
Sample offset was not accounted for in the adaptive sampling code and caused
issues, like immediately applied adaptive filtering, with non-zero values.
Differential Revision: https://developer.blender.org/D13510
This patch adds support for merging images rendered with adaptive sampling to
the merge operator (which is currently only exposed in the Python API).
To do this an sample count buffer is created for each render layer from the
sample count pass if it exists, or from the metadata otherwise. This is then
used for averaging passes.
Differential Revision: https://developer.blender.org/D13457
Use structured binding and for-each loop, remove reduntant type casts, use
find_if instead of loop.
Differential Revision: https://developer.blender.org/D13456
This node outputs the current scene time in seconds or in frames.
Use of this node eliminates the need to use drivers to control values
in the node tree that are driven by the scene time.
Frame is a float value to provide for subframe rendering for motion
blur.
Differential Revision: https://developer.blender.org/D13455
The corresponding vertex group was renamed properly, but the armature
influence was broken for that bone.
Caused by {rB3b6ee8cee708}.
Since above commit, vertex group names are stored on object data (mesh/
lattice/gpencil) and if we update these, we have to inform dependency
graph to have immediate effect.
Maniphest Tasks: T93892
Differential Revision: https://developer.blender.org/D13526
This was an issue with the mixed list of external assets and assets from
the current file. When closing the File Browser to select the custom
preview image, the assets from the current file would be cleared for
reread, to make sure we display up-to-date file data. That is because
the workspace of the temporary File Browser was deleted, causing a
change in the file data (main data-base). The reread would happen in a
background thread, meaning it might not finish before the custom preview
operator runs and queries the active asset. So the preview operator
would get the wrong active asset from context.
Two fixes were needed:
* Make sure current file data is reread before the operator runs, by
doing this partial rereading on the main thread.
* Ensure the asset list (in fact file list) order stays consistent over
rereads. If multiple assets with the same name were shown, the
operator might also have gotten the wrong asset, also leading to a
crash.
Additionally the file operation handler should probably poll before
executing, to fail gracefully at least (not crash).
A crash happened when `instance_id_attribute` further down in the
function was null. This issue was probably introduced when the
id attribute starting using generic attribute handling.
* Correct URL for documentation (was changed recently).
* Add comments.
* Reevaluate and update which functions are public, protected or
private.
* Reorder functions and classes to be more logical and readable.
* Add helper class for the public item API so individual functions it
uses can be made protected/private (the helper class is a friend).
Also allows splitting API implementation from the C-API.
* Move internal layout builder helper class to the source file, out of
the header.
* More consistent naming.
* Add alias for item-container, so it's more clear how it can be used.
* Use const.
* Remove unnecessary forward declaration.
Adds some basic high-level explanations for editor/UI level asset APIs.
Also moves one such comment from the source file to the header file,
so it's in the same file as other API comments.
Autocomplete entires keep track of the length of the prefix
in `name_prefix_offset`. However, the name matching logic
was comparing the string including the prefix which resulted
in tab-completion not working (when the user didn't also type
in the prefix, typically two whitespaces).
This is fixed by passing in a char pointer after the end of
the prefix.
Additionally, some searchbox logic is moved. Previously,
`ui_searchbox_apply` would clear the entry which would mean
that `ui_searchbox_find_index` would never succeed. Now the
search box is only cleared if no match was found.
Differential Revision: https://developer.blender.org/D13483
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
Adds hysteresis to the resolution divider algorithm to avoid having the resolution bounce around when on the boundary of two resolutions.
Reviewed By: brecht, leesonw
Differential Revision: https://developer.blender.org/D12385
Float precision issues cause the `ED_view3d_win_to_3d_on_plane` to return
a value even when the view ray is parallel to the plane.
A more general solution might be desired in this case, as other areas that
use `ED_view3d_win_to_3d_on_plane` might have the same problem.
For now, just work around the problem for the snap cursor.
Fixes a memory leak introduced by D13225.
Caused by not freeing the hash-map in some cases.
Differential Revision: https://developer.blender.org/D13432
The issue here was that after the seek table check, the underlying file wasn't
rewound to the start, so the code that checks for the BLENDER header
immediately reaches EOF and fails.
Since Blender always writes files with a seek table, this bug isn't triggered
by files saved in Blender itself. However, files compressed in external tools
generally don't have a seek table.
If a transform operator is executed as modal and has a "value" set, that value works as an offset.
However few transform modes were supporting this.
Include more transform modes as supported.
This node is a field input that outputs a separate index for each mesh island.
The indices are based on the order of the lowest-numbered vertex in each island.
Authoring help from @hooglyboogly
Differential Revision: https://developer.blender.org/D13504
Caused by {rB3b6ee8cee708}
The raw data is copied here correctly
[`BKE_gpencil_stroke_weights_duplicate` in
`BKE_gpencil_stroke_duplicate`] but the vertex groups names are missing.
Prior to above commit is was enough to have `ED_object_add_duplicate`
(this seemingly took care of duplicating object's defbase).
Now vertex groups names sit on the `bGPdata` rather than the `Object`,
and since the separate operation creates **new** `bGPdata` we have to
copy vertex groups names - and active index - over [via
`BKE_defgroup_copy_list`].
Maniphest Tasks: T93728
Differential Revision: https://developer.blender.org/D13509
This patch suppresses OS version warnings and hides currently unsupported Metal GPUs when enumerating devices.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13506
eed48a7322 caused the `SnapObjectParams` to be stored in the `SnapObjectContext`.
As this pointer is always passing in stack memory, so it seems error prone to keep a reference to this in `SnapObjectContext` since failure to set this will reference undefined stack memory.
So avoid this by moving params out of `SnapObjectContext`.
Differential Revision: https://developer.blender.org/D13401
Though the interfacing with `rctf` becomes slightly more complicated,
this should be more helpful as more of this code usese `float2` instead
of two separate floats.
