The glsl files + create infos of shaders that are only used
during development where still being compiled into blender.
This isn't needed and shouldn't be included. This change will
only include them when WITH_GTEST and WITH_OPENGL_DRAW_TESTS are
enabled. All other cases those files will be skipped.
Resolve an issue where released buffers were returned to the reusable memory pool before GPU work associated with these buffers had been encoded. Usually release of memory pools is dependent on successful completion of GPU work via command buffer callbacks. However, if the pool refresh operation occurs between encoding of work and submission, buffer ref-count is prematurely decremented.
Patch also ensures safe buffer free lists are only flushed once a set number of buffers have been used. This reduces overhead of small and frequent flushes, without raising the memory ceiling significantly.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17118
Compute test case still used legacy API to construct
GLSL shaders. This change will migrate it to use the
GPUShaderCreateInfo's.
In preparation to run test-cases against non-opengl
back-ends.
Due to shader global scope emulation via class interface, global constant arrays in shaders are allocated in per-thread shader local memory. To reduce memory pressure, placing these constant arrays inside function scope will ensure they only reside within device constant memory. This results in a tangible 1.5-2x performance uplift for the specific shaders affected.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17089
Paths to vulkan libraries, paths and related components were
hardcoded in the platform cmake file. This patch separates
this by using adding CMake modules for Vulkan and ShaderC.
This change has only been applied to the macOs configuration as
that is currently our main platform for development. Other platforms
will be added during the development of the Vulkan back-end.
Metal backend does not support primtiive restart for point primtiives. Hence strip_restart_indices removes restart indices by swapping them to the end of the index buffer and reducing the length.
An edge-case existed where all indices within the index buffer were restarts and no valid swap-index would be found, resulting in a buffer underflow.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17088
This patch adds support for compilation and execution of GLSL compute shaders. This, along with a few systematic changes and fixes, enable realtime compositor functionality with the Metal backend on macOS. A number of GLSL source modifications have been made to add the required level of type explicitness, allowing all compilations to succeed.
GLSL Compute shader compilation follows a similar path to Vertex/Fragment translation, with added support for shader atomics, shared memory blocks and barriers.
Texture flags have also been updated to ensure correct read/write specification for textures used within the compositor pipeline. GPU command submission changes have also been made in the high level path, when Metal is used, to address command buffer time-outs caused by certain expensive compute shaders.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T99210
Reviewed By: fclem
Maniphest Tasks: T99210, T96261
Differential Revision: https://developer.blender.org/D16990
Recent changes in our GLSL libraries didn't compile on Vulkan. This
change reverts a compile directive that was removed, but required
in order to compile using the Vulkan backend.
Extract:
- EEVEE: Compiling Shaders (the same message exists in EEVEE Next, but
it uses string concatenation and I don't know yet how to deal with
those--see T92758)
Disambiguate:
- Pan (audio, camera)
- Box (TextSequence)
- Mix (noun in constraints, GP materials)
- Volume (object type, file system)
- Floor (math integer part, 3D viewport horizontal plane)
- Impossible to disambiguate the constraint name because
bConstraintTypeInfo doesn't have a context field.
- Show Overlay (in the sequence editor, use the same message as other
editors to avoid a confusion with the Frame Overlay feature, also
called "Show Overlay")
Additionally, fix a few issues reported by Joan Pujolar (@jpujolar)
in T101830.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17114
When moving or linking an object to a collection, the report was not
properly translatable. In French for instance, it would give
nonsensical half-translated sentences such as "<Object> moved vers
<collection>", instead of "<Object> déplacé vers <collection>".
Instead, separate the report into the four possible translations (one
or multiple objects, linking or moving). This is very verbose and less
legible, but it ensure the sentences can be properly translated,
including plurals in languages which use grammatical agreement.
In addition, use BKE_collection_ui_name_get() to get the collection
name, because the Scene Collection's name is hardcoded, but it can be
localized.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D17112
This operator updates scene strip internal length to reflect target
scene length. Previously scene strip had to be deleted and added from
scratch. Scene strip length in timeline will not be changed.
The code removed here was intended to be an optimization that
avoids creating an additional node to join multiple attribute sets.
However, that optimization did not work, because it did not take
into account whether the single attribute set is required or not.
Allow to explicitly swap node links by pressing the alt-key while
reconnecting node links. This replaces the old auto-swapping based on
matching prefixes in socket names.
The new behavior works as follows:
* By default plugging links into already occupied (single input)
sockets will connect the dragged link and remove the existing one.
* Pressing the alt-key while dragging an existing node link from one
socket to another socket that is already connected will swap the
links' destinations.
* Pressing the alt-key while dragging a new node link into an already
linked socket will try to reconnect the existing links into another
socket of the same type and remove the links, if no matching socket
is found on the node. This is similar to the old auto-swapping.
Swapping links from or to multi input sockets is not supported.
This commit also makes the link drag tooltip better visible, when using
light themes by using the text theme color.
Reviewed By: Hans Goudey, Simon Thommes
Differential Revision: https://developer.blender.org/D16244
Most operations where strips are duplicated use `SEQ_animation` API,
which handles keyframe animation. Now drivers are handled as well.
When group of strips is duplicated and driver references other strip,
it will still reference original strip. However, this is much better,
than previous behavior, when strip duplication results in "transfer" of
driver from original strip to duplicated one.
Fixes T104141
Simplify `BM_uv_element_map_create` by using `BM_face_calc_area_uv_signed`.
Remove unused UV winding code in `BM_uv_vert_map_create`.
Fixes unlikely memory leak in `BKE_mesh_uv_vert_map_create`.
No functional changes.
Differential Revision: https://developer.blender.org/D17137
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
Some miscellaneous cleanups left over from a fix/cleanup combo:
- Use const variables
- Use the C++ `math` namespace functions
- Use `std::array` for arrays with size known at compile time
- Use `MutableSpan` instead of reference to array
Differential Revision: https://developer.blender.org/D17094
In the node groups for T103730, the "Points of Curve" node is often used to
retrieve the root point of every curve. Since the curve point offsets array
already contains that data directly, we can detect this as a special case and
avoid all the other work.
Differential Revision: https://developer.blender.org/D17128
These changes were authored by Michael B Johnson (drwave).
The default Blender USD export currently produces files that trigger
errors in the usdchecker that ships with USD 22.11.
The changes are:
- Set the defaultPrim if no defaultPrim is set. This sets it to the
first prim in the hierarchy which matches the behaviour of Pixar's
referencing (where referencing a USD layer without a defaultPrim will
pick the first prim) as well as matches the logic in Pixar's Maya USD
exporter code.
- Applies the MaterialBindingAPI to prims with material binding
attributes. This is a relatively new requirement for USD as it will
help for efficiency with upcoming changes to Hydra.
- Removes the preview scope in the USD shader hierarchy, because it
is no longer valid for shaders to have any non-container ancestors in
their hierarchy up until the enclosing Material prim.
Reviewed by: Michael Kowalski
Differential Revision: https://developer.blender.org/D17041
BKE blendfile should not be allowed to deal with DNA deprectaed data, so
move recent check in rB138b3815e528 into BLO readfile, in a new
`blo_read_file_checks` util that is being called at the very end of main
readfile code (`blo_read_file_internal` and `library_link_end`).
rB7f564d74f9ed (6 years ago!) forgot to clear the deprecated
`Window->screen` pointer on file read for recent-enough .blend files.
This is required since a valid value is always written in .blend files
for that pointer, to ensure backward compatibility.
The issue was never detected so far because that pointer is explicitely
reset to NULL after filewrite, which includes any memfile undostep
write, and usually existing UI data is re-used instead of loading the
one from the .blend file, so thedden assert in `blo_lib_link_restore`
would never be triggered.
Now moved the assert at the end of `setup_app_data` to ensure it always
get checked.
The node does not support blurring booleans, but that was not handled
property in link drag search.
Differential Revision: https://developer.blender.org/D17139
Only the area where the source buffer will be drawn on the destination buffer
will be evaluated. This will improve performance in sequencer and image editors as
less calcuations needs to happen.
Micro improvement to store delta uv per subsample. This reduces
branching that might happen on the CPU, but also makes it possible
to add other sub-sampling filters as well.
No changes for the end-user.
Adds new options to UV Face selection in the UV Editor, with UV > Select > Select Similar
In multi object edit mode, "Similar Object" selects faces which have the same object.
"Similar Winding" will select faces which have the same winding, i.e. are they
facing upwards or downwards.
Resolves: T103975
Differential Revision: https://developer.blender.org/D17125
